KWT-NITRO

iTrader: (9)

Thanks for the answer. i was asking because they dont share the same shock towers.

if i drill the body to fit the T2R and then it doesnt fit the T3, you will have to pay me back the price of the body + paint job

cheers

Ali

hanulec

iTrader: (28)

Andrew - I know my painted bodies from my T2'008/009 did not fit the same on the T3. You could make it work but the front posts were more forward.

yokemad

+1

Way2Evl

iTrader: (9)

JayL

so he ran

2.8 or pink fronts

and

2.6 or silver rear

?

just verifying the front/rear

JayL

sometimes that fat lower bumper section gets caught on the swr plow disks and makes your car push, just be aware you can't cut as close

Way2Evl

iTrader: (9)

600, 450 xray shock oil is the equivilent to what cst in team associated oil?

BlackedOutREVO

iTrader: (67)

Yeah if you look at the pics he has silver's on the rear, pinks on the front.

Its easier just to get the CST oil lol. But heres a conversion chart

http://www.rceasy.com/2008/01/10/xra...version-table/

sidecarphil1

iTrader: (1)

I have got the H roll centres on my T3 and was wondering if people add 1mm spacers to the outer links too ???

cheeRS Phil

JayL

try to stick with oil measured lke the xray, mugen and tamiya are also good. No matter what any chart says they are not close

BBSpence

iTrader: (64)

AE shows both wt and cst on their shock oil now

shesha

iTrader: (1)

KWT-Nitro...
Adding 2 more holes is not going to be much of an issue, when you think about it, by the time you are done racing your body is going to be pretty much messed up from new people driving on the track.. bro...

Way2Evl

iTrader: (9)

My whole goal is to stay away from everything that's not asphalt, but to be as close at the same time.

Xray oil is expensive, not that I go through it that often.

Thank you much!! This is great stuff!

Way2Evl

iTrader: (9)

How bad would it be to build a shock with a 100% rebound?

JayL

that's not my point

my point is you will always be running a different viscocity oil than everyone else if you go with the 'american' measurements, unless ASSoc makes a 43.79 viscocity oil