The Speed Passion Thread
#676
I have both programmers and no difference.
One stays in my pit bag and the other in my workshop.
#677
#678
#679
#680
Hello guys...
Is Speed Passion Competition v. 3.0 motor will work with novak GTB ? What about the sensor cables from GTB to motor ?
Thanks for tips and informations.
Is Speed Passion Competition v. 3.0 motor will work with novak GTB ? What about the sensor cables from GTB to motor ?
Thanks for tips and informations.
#682
cant say if teh software is exactly the same but the version numbers on some of the Hobbywing software is the same as in the SP software.
I have SP and Hobbywing esc's and have been told supposedly there is a hardware difference but havent expereinced any difference between them.
Still running the Hobbywing software to gauge a difference compared to the SP versions.
Seems the SP software versions is what is preferred by the factory drivers.
I have SP and Hobbywing esc's and have been told supposedly there is a hardware difference but havent expereinced any difference between them.
Still running the Hobbywing software to gauge a difference compared to the SP versions.
Seems the SP software versions is what is preferred by the factory drivers.
#683
There's also 'factory drivers' software not available to general users. I have their 'stock spec' software which works really well with stock motors. But its not released coz it can blow a modified motor. I'm no factory driver though. Just managed to persuade someone to share it with me...
#684
Tech Regular
There's also 'factory drivers' software not available to general users. I have their 'stock spec' software which works really well with stock motors. But its not released coz it can blow a modified motor. I'm no factory driver though. Just managed to persuade someone to share it with me...
#685
Tech Elite
iTrader: (16)
There's also 'factory drivers' software not available to general users. I have their 'stock spec' software which works really well with stock motors. But its not released coz it can blow a modified motor. I'm no factory driver though. Just managed to persuade someone to share it with me...
#686
#687
Tech Regular
iTrader: (10)
Hey,
Believe it or not, but factory drivers use the same Profiles as you guys do, Nothing Special, all the updates and different profiles can be updated using the LCD Program Card.
At the moment i am running 205G which is working well for me. I'm Sure most Other Speed Passion drivers are using this, or the kit setting, which is 303A (I think)
Ryan.
Believe it or not, but factory drivers use the same Profiles as you guys do, Nothing Special, all the updates and different profiles can be updated using the LCD Program Card.
At the moment i am running 205G which is working well for me. I'm Sure most Other Speed Passion drivers are using this, or the kit setting, which is 303A (I think)
Ryan.
#688
Tech Legend
iTrader: (294)
Is it possible to run another capacitor instead of the stock one? I have a novak HV capacitor, and I am thinking of using that instead since the stock cap for the GT2.0 since I can't get a nice mounting location in my 1/10 buggy for the stock cap. Just need to know if it will work ok, or, do I need to use a specific speed passion cap.
#689
If the install is tight, you can use an SP SuperCap - very thin and easy to mount cleanly.
The Novak HV cap would be OK Cain, but watch it's temperature. It shouldn't be any warmer than the ESC itself. If it is warmer - use something better.
The Novak HV cap would be OK Cain, but watch it's temperature. It shouldn't be any warmer than the ESC itself. If it is warmer - use something better.