tc3team

Lol, I dont remember the last time I purchased an rc car, think it was the ta05

Its a long shot, but they do appear on ebay now and then, and if one does its pretty difficult to get one in bad shape simply because they are difficult to destroy

the trf blue turnbuckles are pretty useless, ive replaced my steering ones with titanium items as they bend, then you cant bend them back into shape without them breaking... hence the ta05 ones are just fine

Juan Aveytia

Which version?

k_bojar

iTrader: (30)

if its the original one, shoot me a PM - I got something that might help

rdlkgliders

iTrader: (21)

looking for a steering servo any suggestions?
I am looking at the
jr z9100s .06 150 oz $100 ish
Orion 68001 .07 138oz $99.99
savox sc 1251 .09 125 oz $65.00
futaba s9551 .11 122oz $85.00
Thx

tc3team

I have raced an s9550 for many seasons without a single problem.

Use a good servo saver, make sure your end points are set correctly and it will last for ages

Qatmix

Its an MSX-MarcR although I think all plates should fit. I have parts to fit the old one or the newer ones.

MikeXray

iTrader: (73)

Is the steering post spacing the same as the 417? looks like the 415 rack places the ballstuds a lot further out than the newer racks.

tc3team

Im pretty sure the 415 and 417 use different spacing and setup on the steering racks, its not a simple change over.

Blueman Austria

On the 415 the steering arms are longer, so there are not as much spacers as on the 416/417.

Greetings Rainer

MikeXray

iTrader: (73)

Thanks, I started looking at all the manuals and it looks like MRE had a rack that is more like what is run today, going to look for those parts.

AleD123

iTrader: (5)

Hey guys
Wanted to know what spool fits in the trf415 i cant seem to get my hands on the trf415 one its hard to find does the trf415msx mre one fit?
If not what spool can i use i alredy have the center pulley and im upgrading to wide pitch i just need the spool any suggestion will be appreciated thanks

Blueman Austria

Hy! The part number of the direct holder is 3454401
Threr you attach the pulley, and for the outdrive you can use the 416/417 black delrin ones 51443 with the blue sleeves 9804389, or the TA05 Steel cups 9485079.

From the black delrin cups there is also a set with the sleeves from 3racing available.

This spool matches every 415 version.

Greetings Rainer

AleD123

iTrader: (5)

Thanks for that mate
Ive just purchased the spool two wide pitch pulley front and rear and the center pulley and was wondering if i need to get the blue sleeves are they already on the one way if not then i need to get them to
Thanks

chrisk

iTrader: (32)

Does anybody have a spare lower deck they want to sell?

2 or 2.25 to suit msxx mre


Doesn't have to be new but in fair condition

AleD123

iTrader: (5)

Ok
Last question
Where can i get titanium turnbuckle set that has them in stock
Thanks