Tamiya TRF415
Tech Regular
iTrader: (4)
Originally Posted by JayL
MRE turnbuckles:
for titanium ones I listed the part#'s
2 of 3x42mm tamiya part#49283
4 of 3x32mm tamiya part#53527
1 of 3x23mm tamiya part#53526
that is what you need!
Jay
for titanium ones I listed the part#'s
2 of 3x42mm tamiya part#49283
4 of 3x32mm tamiya part#53527
1 of 3x23mm tamiya part#53526
that is what you need!
Jay
Tech Elite
iTrader: (6)
Originally Posted by JoeGlover
My bad those are the links neede for the MSX not the MRE. Sorry about that
Originally Posted by HarshGuy
NP, just don't let it happen again
Ok harsh, your gonna need:
2 X (3 x 42mm) - Steering Tie Rods
4 X (3 x 32mm) - F + R Camber Links
1 X (3 x 23mm) - Servo Horn to Evo V steering uprights
Hope this helps!
Originally Posted by JAY_UK
Ok harsh, your gonna need:
2 X (3 x 42mm) - Steering Tie Rods
4 X (3 x 32mm) - F + R Camber Links
1 X (3 x 23mm) - Servo Horn to Evo V steering uprights
Hope this helps!
2 X (3 x 42mm) - Steering Tie Rods
4 X (3 x 32mm) - F + R Camber Links
1 X (3 x 23mm) - Servo Horn to Evo V steering uprights
Hope this helps!
Tech Champion
iTrader: (4)
Originally Posted by Ben.C
1st the delrin outdrives for the spool
Mine fit fine.... if there a little tight to get on and off, well thats by design.
Tech Elite
iTrader: (6)
Originally Posted by TryHard
Eh? Why did you shave them?
Mine fit fine.... if there a little tight to get on and off, well thats by design.
Mine fit fine.... if there a little tight to get on and off, well thats by design.
Tech Fanatic
iTrader: (2)
hey kewdawg, i have not raced at horsham yet but plan to. i have some friends that race there. i race at southshore hobbies in ny most of the time. but im definately gonna try to get out to horsham this year and we can definetely bounce some ideas around. cool.
Tech Fanatic
iTrader: (2)
hey carl. i run the lwt arms with 4 degee hubs on carpet. just curious how does the car handle with 2 degee. does it calm down the steering a little. thanx.
Tech Champion
iTrader: (4)
Originally Posted by HarshGuy
The MRE manual said to cut the little lip off, but I didn't cut it off, the cups fit perfectly and "snap" into place by leaving the lip on and car works just fine.
Hmm... maybe I should pay more attention to the manual next time....
I've left the lip on aa well, makes sure that the sleves don't fall off.
Tech Elite
iTrader: (6)
Originally Posted by TryHard
Hmm... maybe I should pay more attention to the manual next time....
I've left the lip on aa well, makes sure that the sleves don't fall off.
I've left the lip on aa well, makes sure that the sleves don't fall off.
Tech Addict
iTrader: (3)
Originally Posted by xtrememadness
hey carl. i run the lwt arms with 4 degee hubs on carpet. just curious how does the car handle with 2 degee. does it calm down the steering a little. thanx.
Tech Master
iTrader: (12)
Hi Guy's
I have a question please.
What diff do you run and is it for indoor or outdoor and what surface do you use it on.
I use a one way on very grippy outdoor asphalt surface on my TRF 415 MSX.
I would love to know what your setup is please.
Thanks guys
Addam
I have a question please.
What diff do you run and is it for indoor or outdoor and what surface do you use it on.
I use a one way on very grippy outdoor asphalt surface on my TRF 415 MSX.
I would love to know what your setup is please.
Thanks guys
Addam
Tech Elite
iTrader: (3)
Tech Regular
Depends on what yor are wanting.
Spool for tight outdoor alpshalt
one way for flowing outdoor alpshalt
Diff for indoor foams
oneway for indoor rubber
spool for tight indoor rubber
note some driver prefer the spool over the oneway due to allowance for braking etc
Spool for tight outdoor alpshalt
one way for flowing outdoor alpshalt
Diff for indoor foams
oneway for indoor rubber
spool for tight indoor rubber
note some driver prefer the spool over the oneway due to allowance for braking etc
Tech Elite
iTrader: (3)
Originally Posted by xtrememadness
hey kewdawg, i have not raced at horsham yet but plan to. i have some friends that race there. i race at southshore hobbies in ny most of the time. but im definately gonna try to get out to horsham this year and we can definetely bounce some ideas around. cool.