Awesomatix EP Touring Car (A700 Shaft Drive)
#5658
Tech Champion
iTrader: (31)
I missed that!
I noticed that as well, but I'll prolly still end up with some
On a side note....
My EVO build is going great. Tons of pieces but such a pleasure to build. BTW, that cf 12mm tranny tool should really come in the kit
Oleg did you change suppliers for the EVO kit bearings? Gotta say from the first build of my EVO compared to my USA the bearings were much smoother and immediately the car was freer.
JB-- Ceramic, they will be nice no doubt but the latest batch of bearings I got in my EVO were super free right away.
JB-- Ceramic, they will be nice no doubt but the latest batch of bearings I got in my EVO were super free right away.
On a side note....
My EVO build is going great. Tons of pieces but such a pleasure to build. BTW, that cf 12mm tranny tool should really come in the kit
#5660
Tech Initiate
#5662
Tech Fanatic
Overall height of the TOP pivot balls can be bigger due to the increased ball diameter.
AT21 ball center height is 4,1mm
AT21S ball center height is 3,6mm
ST24 ball center height is 3,4mm
#5663
#5664
Tech Champion
iTrader: (31)
Thanks Oleg and yes, I agree.
And for others info, the ball center of the TOP ball is 4.64mm.
You are correct Mike. I had to re-measure and the ball center is actually closer to 4.30mm
And for others info, the ball center of the TOP ball is 4.64mm.
You are correct Mike. I had to re-measure and the ball center is actually closer to 4.30mm
Last edited by JayBee; 02-16-2014 at 10:51 AM. Reason: had to zero out my calipers
#5666
Tech Initiate
Here are the manuals for an Evo assembly. The combination is the standard A700L + the FFG/Evo manuals together.
There are some steps that require you to be mechanically intuitive to switch between the 2 and may not be exactly clear when to do so. With that said, read through the A700L manual fully, maybe a couple times before you build.
There are some steps that require you to be mechanically intuitive to switch between the 2 and may not be exactly clear when to do so. With that said, read through the A700L manual fully, maybe a couple times before you build.
#5668
Tech Elite
iTrader: (9)