Awesomatix EP Touring Car (A700 Shaft Drive)
#6888
yeah i usually run about 1.5 to 2 degrees of toe out. so i was running 0 toe as per the setup sheet. might be my problem. i may change the ackerman back to what i had before. will try one at a time till its where i want it. thanks. doug.
#6889
Hi everyone,
I saw on Freddy ETS Luxembourg's set-up he was using AT31 instead of C31 FFG rod (and running the Raceberry chassis). Why prefer the use of AT31 instead of C31?
Another question: do the AM28 (trial caster link) replace the P38 (FCB Link)? Any feedback for the AM28 in comparison with P38? I understand the main difference between both parts is the material (aluminium for AM28 and plastic for P38), but is there any advantage in using AM28 instead of P38?
Thanks for answering,
Best regards,
G-rem
I saw on Freddy ETS Luxembourg's set-up he was using AT31 instead of C31 FFG rod (and running the Raceberry chassis). Why prefer the use of AT31 instead of C31?
Another question: do the AM28 (trial caster link) replace the P38 (FCB Link)? Any feedback for the AM28 in comparison with P38? I understand the main difference between both parts is the material (aluminium for AM28 and plastic for P38), but is there any advantage in using AM28 instead of P38?
Thanks for answering,
Best regards,
G-rem
Last edited by G-rem; 08-04-2014 at 02:52 AM.
#6890
Tech Fanatic
Interesting video from our factory team driver Ahn ( Korea):
https://www.facebook.com/photo.php?v=698181426920185
#6891
Thank you Oleg
Do you plan to do another stiffness comparison between C01-AL + AM30-5 (+ C21) and C01-AL-S + AM30-5 (+ C21), like you did last time?
( http://www.rctech.net/forum/r-c-item...700-parts.html )
Do you plan to do another stiffness comparison between C01-AL + AM30-5 (+ C21) and C01-AL-S + AM30-5 (+ C21), like you did last time?
( http://www.rctech.net/forum/r-c-item...700-parts.html )
Last edited by G-rem; 08-05-2014 at 12:09 PM.
#6892
Tech Fanatic
and 130% with the completely screwed AM30-5 stiffener.
The measurement with C21 top deck will be soon.
#6895
#6896
Tech Adept
Hi everyone,
I tried last weekend (national race) the new alloy soft chassis and i have to say that it's a big improvement to compare the other alloy chassis (C01-L) !!
The car has more traction, more steering and easier to drive.
I used it with the C21 top deck and the central stiffener AM30.
It was on a low-med traction track with the Ride34.
I tried last weekend (national race) the new alloy soft chassis and i have to say that it's a big improvement to compare the other alloy chassis (C01-L) !!
The car has more traction, more steering and easier to drive.
I used it with the C21 top deck and the central stiffener AM30.
It was on a low-med traction track with the Ride34.
#6897
R/C Tech Elite Member
iTrader: (28)
I too had a great outing with the c01al-s this past weekend in mod tc. As compared to my Raceberry chassis car, the car was much more raceable under pressure. It had more forward bite allowing me to smash throttle without getting very loose. I ran with am30-5 and no top deck. Hope to try other configurations this upcoming Saturday...
#6899
Hi do you guys think the new Awesomatix Double Cardan Joint system can be used in other car brands?
#6900
Tech Regular