XRAY T2’009
#2356
Tech Addict
RCmart
http://www.teamxray.com/xshop
ebay (UK & US)
some T2 parts fit
305002: Complete ball diff: Thats gonna be expensive, no matter where you buy (now 'superseded' : check the xray site)
Same with diff output shafts $$$$
#2357
Tech Addict
http://www.modellbil.no/shop/product...ducts_id=20774
Part 305005 is at a ok price. but it looks like its open so dirt can get in to the greasy stuff.
anyone knows?
Part 305005 is at a ok price. but it looks like its open so dirt can get in to the greasy stuff.
anyone knows?
#2360
Tech Regular
iTrader: (7)
I just bought a used 009t2.I just noticed in the instr. manual that the rubber edition takes one kind of a-arm ,and the carpet car another..'
"I am supposed to have the rubber spec edition" .What should be stamped on the a-arms?And what is the difference in te 2?Can the car run with different types of a-arms.?Would the car handle different with foam spec arms on a rubber spec car?This car has an X and an H stamped on each arm.But the stamped letters are on different places on each arm it seems.
regards
"I am supposed to have the rubber spec edition" .What should be stamped on the a-arms?And what is the difference in te 2?Can the car run with different types of a-arms.?Would the car handle different with foam spec arms on a rubber spec car?This car has an X and an H stamped on each arm.But the stamped letters are on different places on each arm it seems.
regards
#2362
Tech Fanatic
iTrader: (38)
Join Date: Jul 2007
Location: Somewhere between raising hell and Amazing Grace
Posts: 761
Trader Rating: 38 (100%+)
Anyone know if the Exotek chassis for the 08/09 includes the extra bulkhead mounting holes for the motor forward conversion?
-rocky b
-rocky b
#2364
Tech Apprentice
iTrader: (3)
I just bought a used 009t2.I just noticed in the instr. manual that the rubber edition takes one kind of a-arm ,and the carpet car another..'
"I am supposed to have the rubber spec edition" .What should be stamped on the a-arms?And what is the difference in te 2?Can the car run with different types of a-arms.?Would the car handle different with foam spec arms on a rubber spec car?This car has an X and an H stamped on each arm.But the stamped letters are on different places on each arm it seems.
regards
"I am supposed to have the rubber spec edition" .What should be stamped on the a-arms?And what is the difference in te 2?Can the car run with different types of a-arms.?Would the car handle different with foam spec arms on a rubber spec car?This car has an X and an H stamped on each arm.But the stamped letters are on different places on each arm it seems.
regards
#2365
Tech Regular
iTrader: (7)
From the information I have gathered, I have the rubber spec car.It has the 2.5 lower chassis and the right upper deck.The only thing I can see wrong are the a-arms.Three of the arms have XH stamped on them, and one has just an H stapmed on it.Is this going to throw things that far out wack..,.I will certainly be back with more questions as I find more things wrong with the car.
thanks
thanks
Last edited by tc3jp; 05-19-2010 at 07:35 PM.
#2366
Tech Lord
iTrader: (52)
From the information I have gathered, I have the rubber spec car.It has the 2.5 lower chassis and the right upper deck.The only thing I can see wrong are the a-arms.Three of the arms have XH stamped on them, and one has just an H stapmed on it.Is this going to throw things that far out wack..,.I will certainly be back with more questions as I find more things wrong with the car.
thanks
thanks
#2367
Tech Fanatic
iTrader: (38)
Join Date: Jul 2007
Location: Somewhere between raising hell and Amazing Grace
Posts: 761
Trader Rating: 38 (100%+)
#2368
Tech Addict
#2369
Tech Fanatic
iTrader: (30)
Can you run the Spec R gear diff in the t2 009?
http://www.egrracing.com/shop/gear-d...8t-p-3825.html
it says it fits the T3 but doesn't mention the t2 009.
And also if you can use the 38t gear diff, can you run it with the 20t standard centre pulley if you change the rear belt??
Thanks in advance
http://www.egrracing.com/shop/gear-d...8t-p-3825.html
it says it fits the T3 but doesn't mention the t2 009.
And also if you can use the 38t gear diff, can you run it with the 20t standard centre pulley if you change the rear belt??
Thanks in advance
#2370
Tech Regular
iTrader: (7)
I am getting an ungodly vibration when I turn the wheels right or left.
Someone said the "ecs" parts will fix this .
Searching Nexes racing, I came up with two options, part number: "305277" and part number:"305327" which ones do I need? and do I just need them for the front to solve this problem.A guy at the track had this same problem with his T-3 and he replaced them with the ecs parts.I saw him go full throttle while turning right and left and it was as smooth as glass,but I did not notice if he had them on the rear.I saw them on the front though.
Someone said the "ecs" parts will fix this .
Searching Nexes racing, I came up with two options, part number: "305277" and part number:"305327" which ones do I need? and do I just need them for the front to solve this problem.A guy at the track had this same problem with his T-3 and he replaced them with the ecs parts.I saw him go full throttle while turning right and left and it was as smooth as glass,but I did not notice if he had them on the rear.I saw them on the front though.