tc5 pull left problem puzzling me
10-17-2008, 07:28 PM
#31
Did you try loosing the lugnuts on the left side?.. my tc4 would do that when they were too tight idk y. Or try Cleaning the bearings too
10-17-2008, 08:20 PM
#32
Hey... I would recommend checking your bearings, most likely you have a bearing that is binding at some point, the only time I had a car pull to one side is when I had a bad bearing!!. I would also make sure your servo saver is not too loose...
Digs
Digs
10-17-2008, 10:48 PM
#33
i was getting a pull to the right on my losi under hard acceleration. any other circumstance and it would track perfectly straight.
it was my droop settings in the front being ever so slightly off from side to side.
it was my droop settings in the front being ever so slightly off from side to side.
10-18-2008, 02:44 AM
#34
guys-this has been solved=upper deck screws too tight was the problem--this causes the chassis to tweak
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
