Team Orion 3800 Lipo or Team Trinity 3800 Lipo?
#16
I ordered two from this place for only $75.95 ea. plus shipping! I got
an e-mail confirmation from them that it was shipped yesterday!
http://shopping.rcmodel.hk/product_i...ducts_id=12986
an e-mail confirmation from them that it was shipped yesterday!
http://shopping.rcmodel.hk/product_i...ducts_id=12986
Cannot tell one bit of difference between their new 3800 and my two other 3600 lipos (7-8 month old). The 3800 weighs approximately 5 grams more.
Only other lipo I would go for at this point would be either of the SMCs; but, I would definitely like to see SMCs offered with bullet connectors first.
#17
I ordered two from this place for only $75.95 ea. plus shipping! I got
an e-mail confirmation from them that it was shipped yesterday!
http://shopping.rcmodel.hk/product_i...ducts_id=12986
an e-mail confirmation from them that it was shipped yesterday!
http://shopping.rcmodel.hk/product_i...ducts_id=12986
#18
#19
Tech Lord
iTrader: (26)
I received one from them last week. Came in the time frame they promised.
Cannot tell one bit of difference between their new 3800 and my two other 3600 lipos (7-8 month old). The 3800 weighs approximately 5 grams more.
Only other lipo I would go for at this point would be either of the SMCs; but, I would definitely like to see SMCs offered with bullet connectors first.
Cannot tell one bit of difference between their new 3800 and my two other 3600 lipos (7-8 month old). The 3800 weighs approximately 5 grams more.
Only other lipo I would go for at this point would be either of the SMCs; but, I would definitely like to see SMCs offered with bullet connectors first.
#20
bullet connectors are just nice and clean with no wires dangling
around. I'm happy to see Team Trinity is doing the same thing with
their 3800 25C Lipos. Can't wait to get my Orion 3800 30C Lipos!
#21
Hi Guys
Here is my L-W-P (Lipo Weight Plate) Made from 1.5mm stainless steel, with 60grams of lead stuck to the base of it, (I may screw them on in the next version) it weighs in at a total 150 grams. I have a foam block at the front of the Lipo, which slips neatly up against the bulk head to stop it from moving forward, as I have sanded the lumps off of the bottom of the Orion 3800 so as to get it under the top deck. I have stuck a strip of foam to stop from moving inward the the car, even though it probably wont because of the tape holding it, I have made a ledge to stop it from coming out of the L-P-W and covered it in a sticky back CF paper. Its attached to the chassis by using original holes, one for the ariel mount, and the one just back from that. I have no extra lead anywhere in the TC and now weight in at 1508. Any questions ask away
Cheers Malc TCCFM
Here is my L-W-P (Lipo Weight Plate) Made from 1.5mm stainless steel, with 60grams of lead stuck to the base of it, (I may screw them on in the next version) it weighs in at a total 150 grams. I have a foam block at the front of the Lipo, which slips neatly up against the bulk head to stop it from moving forward, as I have sanded the lumps off of the bottom of the Orion 3800 so as to get it under the top deck. I have stuck a strip of foam to stop from moving inward the the car, even though it probably wont because of the tape holding it, I have made a ledge to stop it from coming out of the L-P-W and covered it in a sticky back CF paper. Its attached to the chassis by using original holes, one for the ariel mount, and the one just back from that. I have no extra lead anywhere in the TC and now weight in at 1508. Any questions ask away
Cheers Malc TCCFM
Last edited by TheCoolCanFanMan; 08-04-2008 at 10:21 AM.
#22
Wow, got my 2 Orion 3800's 30C today. That's fast shipping
from Hong Kong, 6 days only!
http://shopping.rcmodel.hk/product_i...1r9nvejj8ghge5
from Hong Kong, 6 days only!
http://shopping.rcmodel.hk/product_i...1r9nvejj8ghge5
#23
#24
#25
#26
Tech Master
iTrader: (94)
Hi Guys
Here is my L-P-W (Lipo Weight Plate) Made from 1.5mm stainless steel, with 60grams of lead stuck to the base of it, (I may screw them on in the next version) it weighs in at a total 150 grams. I have a foam block at the front of the Lipo, which slips neatly up against the bulk head to stop it from moving forward, as I have sanded the lumps off of the bottom of the Orion 3800 so as to get it under the top deck. I have stuck a strip of foam to stop from moving inward the the car, even though it probably wont because of the tape holding it, I have made a ledge to stop it from coming out of the L-P-W and covered it in a sticky back CF paper. Its attached to the chassis by using original holes, one for the ariel mount, and the one just back from that. I have no extra lead anywhere in the TC and now weight in at 1508. Any questions ask away
Cheers Malc TCCFM
Here is my L-P-W (Lipo Weight Plate) Made from 1.5mm stainless steel, with 60grams of lead stuck to the base of it, (I may screw them on in the next version) it weighs in at a total 150 grams. I have a foam block at the front of the Lipo, which slips neatly up against the bulk head to stop it from moving forward, as I have sanded the lumps off of the bottom of the Orion 3800 so as to get it under the top deck. I have stuck a strip of foam to stop from moving inward the the car, even though it probably wont because of the tape holding it, I have made a ledge to stop it from coming out of the L-P-W and covered it in a sticky back CF paper. Its attached to the chassis by using original holes, one for the ariel mount, and the one just back from that. I have no extra lead anywhere in the TC and now weight in at 1508. Any questions ask away
Cheers Malc TCCFM
#28
#29
I have tried the 3800 30c and am very impressed with them I have to say, I will getting shot of all my NMHs and purchasing another pack of these. Its the way forward for RC
Cheers Malc