Team Associated Factory Team RC10R5
#601
It seems to be a very hard kit to find. Everyone in the US seems to be out of stock. Is it really 'between batches' or is the car nearer to being discontinued.
This might mean there is a new car in development , or near release.
This might mean there is a new car in development , or near release.
#602
Tech Champion
iTrader: (34)
#603
Team AE Store has it in stock
But dont you think its strange that Tower,Amain ,Stormer ,all my favorites etc , are all out of stock.
#607
what do I need to convert rc12r5.1 to rc10r5?
#608
Tech Elite
iTrader: (1)
Rear axle and hubs
Chassis
Front sub chassis
Front brace
Bumper
Tie rods
Right and left pods
Lower pod
Upper pod
Rear brace, body mounts
Front body mounts
Shock mount
On the plus side you can reuse the servo mounts and saver plus most of the front suspension and bearings.
Probably be cheaper and easier to get a used one.
Chassis
Front sub chassis
Front brace
Bumper
Tie rods
Right and left pods
Lower pod
Upper pod
Rear brace, body mounts
Front body mounts
Shock mount
On the plus side you can reuse the servo mounts and saver plus most of the front suspension and bearings.
Probably be cheaper and easier to get a used one.
Last edited by AreCee; 09-25-2011 at 11:39 AM.
#609
Tech Elite
iTrader: (13)
Looking at the two exploded views side by side, you need this list of parts to convert a 5.1 to 10r5. somethings like the rear pod is omitted because the lower pod assembly is the same, so no sense changing the bulkheads and upper plate. shocks are the same, the whole front suspension is the same just mounts to chassis different. kingpins had a different part number, but if somone has both cars and can compare the lengths, they may be the same.
8519 $17.99
4555 $2.00
2x 6924 $1.89
8520 $19.99
8513 $12.75
4535 $1.89
8510 $50.99
8515 $16.49
8514 $7.29
8427 $3.69
8423 $4.59
2x 8516 $7.29
8522 $3.69
8517 $19.99
8518 $2.79
basicly you need all the cf parts and new rear wheel hubs. so for $180ish you can build it if you have a 5.1. thats a whole crc almost. worth it?
8519 $17.99
4555 $2.00
2x 6924 $1.89
8520 $19.99
8513 $12.75
4535 $1.89
8510 $50.99
8515 $16.49
8514 $7.29
8427 $3.69
8423 $4.59
2x 8516 $7.29
8522 $3.69
8517 $19.99
8518 $2.79
basicly you need all the cf parts and new rear wheel hubs. so for $180ish you can build it if you have a 5.1. thats a whole crc almost. worth it?
#610
Tech Apprentice
The 1/10 kingpin and front springs are longer than the 1/12.
You could also reused the 1/12 rear cross bar so you wouldn't need p/n 8513. The body post is slightly wider on the 1/12.
You could also reused the 1/12 rear cross bar so you wouldn't need p/n 8513. The body post is slightly wider on the 1/12.
#611
Tech Elite
iTrader: (13)
do the kingpins HAVE to be longer? couldnt you just use more ride heigh shims and keep the stock ones? not that they are expensive but maybe an option? then just take your 12r bulkheads off and straight onto the 10..
i might gather these parts actually. wouldnt mind running wgt next year and associated wanted like $500 for the kit? screw that.
i might gather these parts actually. wouldnt mind running wgt next year and associated wanted like $500 for the kit? screw that.
#612
The Associated Store has the kit for 270.
#613
#615