Tekin RS ESC sensored
#6436
#6437
Tech Apprentice
#6438
Tech Lord
iTrader: (103)
Step 1)Click "Start" and select "Control Panel." Next, double-click "Folder Options." From there, choose the "View" tab.
Step 2) Un-check "Hide Extensions for Known File Types" and click "OK."
Step 3) Navigate to the file whose extension you would like to change. Right-click the filename and select "Rename."
Step 4) Type a new filename. The extension is the portion of the filename that follows the period. In the accompanying image, the extension was changed from "txt" to "zip" Press "Enter"; you will be asked if you are sure you want to change the filename. Select "Yes."
Googled it...
Step 2) Un-check "Hide Extensions for Known File Types" and click "OK."
Step 3) Navigate to the file whose extension you would like to change. Right-click the filename and select "Rename."
Step 4) Type a new filename. The extension is the portion of the filename that follows the period. In the accompanying image, the extension was changed from "txt" to "zip" Press "Enter"; you will be asked if you are sure you want to change the filename. Select "Yes."
Googled it...
#6441
#6446
Matt,
Please don't give out bad info. There was NEVER a v200 that had turbo go below .5 delay.
There was v199 that had a turbo timing slider bar that was NOT released to more than a dozen people. That version didn't have half the turbo we're using now.
If you think you're getting below .5 delay you need to double check your software.
Please don't give out bad info. There was NEVER a v200 that had turbo go below .5 delay.
There was v199 that had a turbo timing slider bar that was NOT released to more than a dozen people. That version didn't have half the turbo we're using now.
If you think you're getting below .5 delay you need to double check your software.
#6447
Tech Elite
iTrader: (8)
Matt,
Please don't give out bad info. There was NEVER a v200 that had turbo go below .5 delay.
There was v199 that had a turbo timing slider bar that was NOT released to more than a dozen people. That version didn't have half the turbo we're using now.
If you think you're getting below .5 delay you need to double check your software.
Please don't give out bad info. There was NEVER a v200 that had turbo go below .5 delay.
There was v199 that had a turbo timing slider bar that was NOT released to more than a dozen people. That version didn't have half the turbo we're using now.
If you think you're getting below .5 delay you need to double check your software.
#6449
Tech Master
iTrader: (83)
K guys Ive been testing the v200 the last couple of weeks and it pretty good. Im still having some issues with getting her just right though. Can anybody give me a great setup or starting point for 13.5 and 17.5. This rubber tire on carpet tc. Im heading out to vegas and I want the put a good showing.
#6450
I keep gearing lighter and lighter. I ended up gearing my 17.5 at 5.88 last night. I would have went even lighter, but any smaller, and my pinion wouldn't touch the spur anymore. So I'm going to grab a bigger spur.
I don't have dimensions of the track, but it does have a fairly short strait compared to other tracks I have been to. Pre-200, I was geared roughly 5.0.
I don't have dimensions of the track, but it does have a fairly short strait compared to other tracks I have been to. Pre-200, I was geared roughly 5.0.