darrenoakley

Oh cool wondered if it was my netbook playing up.

Many thanks for all the tech help tonight Randy. Looks like we sorted the problem so over the moon.

Randy_Pike

iTrader: (6)

The "bug" is just a display issue. It's actually saving the rpm schedule you put in but wont show it to you correctly.

We're working on the fix asap of course. For now use C1 for custom profiles.

STLNLST

iTrader: (32)

Thanks for having tough skin. Keep up the good work. I got the 2wd now and if I get a 1/8th scale I'm coming for ya

Randy_Pike

iTrader: (6)

1/8? You? Ha Bring it sucka!

DS Motorsport

iTrader: (2)

Thanks for the reply, I still have the stock Cap. so I will use that.

tallyrc

iTrader: (12)

couple q's.. i'm sure this has been asked but the search seems to never work these days.. first.. certainly the default deadband of 56 is not % of total throtle so what is it? a percentage of somethign else? and with deadband in the modern radios should either the radio or esc be set at "0"? also.. are out base setups from 208 a good starting point with 212? excited to give it whirl this weekend..

Swampracer

iTrader: (72)

I had V208 loaded V212 and no throttle. Recal radio (KOEurus w R/C dynamic booster)

The RS will not chirp anymore when setting the radio. I have steering but no throttle.

I checked the sensor wire, all wire connections motor etc.

Anyone have an idea? Help is appreciated. I tried reloading V208 and no throttle

Thanks Greg G

Randy_Pike

iTrader: (6)

Greg make sure you're setting your LVC to 1s. The chime is created by the motor so do you have your motor hooked up?

Nuetral width is the "window" in which we wil accept a calibrated nuetral.

macdude

iTrader: (6)

Reload your firmware. I had the same issue going from 203 to 208. Don't know what happened but something did not load correctly and would not calibrate to the radio.

DaveW

iTrader: (1)

Man im almost scared to load up 212.

I DL'd it on my laptop, but havent updated my RS's yet. I think im gonna wait till after this weekend to mess with it.

nashrcracer

iTrader: (1)

just updated 4 tekins at the track tonight to 212. not a problem with any of them and the response has been more brake and more punch out of 3 of the drivers. still haven't run mine. all running stock spec. we'll see got mine charging.

DaveW

iTrader: (1)

Well this is good. We need more positive feedback!!

Swampracer

iTrader: (72)

My fault, I had the wrong sensor setting selected. Works the balls now

L.Fairtrace

iTrader: (24)

Ive run it a few times with no problems what so ever. Been dialed to me.

big al

iTrader: (10)

Strange problem here guys. When I plug in my battery (deans) there is a small spark. This happens with both of my batteries. Any tips or suggestions? Thanks--Al