Team Magic E4 Thread
#361
Tech Regular
I see that K-Fatory has brought out rear blocks to give more outside toe-in. Is it possible to get different rear toe-in hing pin holders to get more inbound toe-in.
The reason I ask is because I currently run 3.5 degrees rear inbound toe-in on my TC5 for carpet racing - maybe the e4 turns in better on the rear and I may not need the extra toe-in??
The reason I ask is because I currently run 3.5 degrees rear inbound toe-in on my TC5 for carpet racing - maybe the e4 turns in better on the rear and I may not need the extra toe-in??
#362
Tech Adept
The E4, have a rear pivot block, with 2 positions 1.5º - 2.5º of toe-in inboard.
Greetings, Luis C.
Greetings, Luis C.
#363
Tech Regular
#364
for the tranny, on highgrip carpets i think bigger sidebelt pulleys would be a great option,more teeth more "traction for the belt" less slipper...and in plastic. same for front Solid/onway...
#365
Tech Adept
#366
Tech Rookie
Some diffrent rear hub carriers would be a great option
0,5 and 1,5 degrees would do it. They dont have to be alu, plastic is just fine.
Anybody who knows when the new Alu hub with 1,5 degress is goingto be avalible in the shops? Someone who have a link to a webshop?
0,5 and 1,5 degrees would do it. They dont have to be alu, plastic is just fine.
Anybody who knows when the new Alu hub with 1,5 degress is goingto be avalible in the shops? Someone who have a link to a webshop?
#367
E4 Movie
E4 Battle Movie!!!!
Driver: Gansei
Car: E4
Motor: LRP 3.5T
ESC: LRP TC
Tire: Sweep 28
Battery: E-NINE 4600
Gear Ratio: 8.5:1
i made this movie when my front tire almost wear out.
http://www.youtube.com/watch?v=dSBVyir7N2Y
Driver: Gansei
Car: E4
Motor: LRP 3.5T
ESC: LRP TC
Tire: Sweep 28
Battery: E-NINE 4600
Gear Ratio: 8.5:1
i made this movie when my front tire almost wear out.
http://www.youtube.com/watch?v=dSBVyir7N2Y
#368
Super Moderator
iTrader: (239)
E4 Battle Movie!!!!
Driver: Gansei
Car: E4
Motor: LRP 3.5T
ESC: LRP TC
Tire: Sweep 28
Battery: E-NINE 4600
Gear Ratio: 8.5:1
i made this movie when my front tire almost wear out.
http://www.youtube.com/watch?v=dSBVyir7N2Y
Driver: Gansei
Car: E4
Motor: LRP 3.5T
ESC: LRP TC
Tire: Sweep 28
Battery: E-NINE 4600
Gear Ratio: 8.5:1
i made this movie when my front tire almost wear out.
http://www.youtube.com/watch?v=dSBVyir7N2Y
#369
#371
Tech Regular
I also watched your indoor movie E4 Yangjae indoor - what sort of surface is that? Is it carpet? If so can you let me know what setup you used there.
#372
and i used 37 sponge tire..
But i did not like the movie setup.. and i couldn't remember the exact setup
i remember it was very hard setup(hard spring, 1.4 stebil bar)
#373
great vid , except for the sound track lol
E4 Battle Movie!!!!
Driver: Gansei
Car: E4
Motor: LRP 3.5T
ESC: LRP TC
Tire: Sweep 28
Battery: E-NINE 4600
Gear Ratio: 8.5:1
i made this movie when my front tire almost wear out.
http://www.youtube.com/watch?v=dSBVyir7N2Y
Driver: Gansei
Car: E4
Motor: LRP 3.5T
ESC: LRP TC
Tire: Sweep 28
Battery: E-NINE 4600
Gear Ratio: 8.5:1
i made this movie when my front tire almost wear out.
http://www.youtube.com/watch?v=dSBVyir7N2Y
#374
Tech Adept
Very good driving, Gansei, nice video.
Today, i make a new steering plate, with a revised geometry based in formulas i see in the web, all is perfect, not bump steer,... but in the practice not work properly, i need more calculations,...well, go to the original desing, is best
This is how is see the front of the car, with a HB sway bar.
[IMG=http://img530.imageshack.us/img530/711/http://img530.imageshack.us/img530/711/img1896qs6.th.jpg]
The car, ready to run weight, without the new spool (-15g), with a new fiber tray for batteries, (handmade only 11g - original alu 23g), with the spool, the total weight is only 1406g, ready to run. Is possible remove more weight, with a lightweight body (-15~20g), here the minimal weight is 1400 (5 cell - BL).
[IMG=http://img233.imageshack.us/img233/9549/http://img233.imageshack.us/img233/9549/img1899of7.th.jpg]
Merry christmas, Luis C.
Today, i make a new steering plate, with a revised geometry based in formulas i see in the web, all is perfect, not bump steer,... but in the practice not work properly, i need more calculations,...well, go to the original desing, is best
This is how is see the front of the car, with a HB sway bar.
[IMG=http://img530.imageshack.us/img530/711/http://img530.imageshack.us/img530/711/img1896qs6.th.jpg]
The car, ready to run weight, without the new spool (-15g), with a new fiber tray for batteries, (handmade only 11g - original alu 23g), with the spool, the total weight is only 1406g, ready to run. Is possible remove more weight, with a lightweight body (-15~20g), here the minimal weight is 1400 (5 cell - BL).
[IMG=http://img233.imageshack.us/img233/9549/http://img233.imageshack.us/img233/9549/img1899of7.th.jpg]
Merry christmas, Luis C.
#375
Tech Adept
New TM E4 FS Foam Spec. with new chassis 3mm and 96 mm , new top deck 2.5 mm, 3mm shock towers, new internal ratio 1.88, best suite for Lipos and BL motors, widened belts, new steering, ... more news in TM web.
Merry christmas, Luis C.
Merry christmas, Luis C.