Hpi Pro 4
Tech Master
Originally Posted by no1uno
If you do the math you can't get to 2.5 to 1 with a 39 tooth ring gear the only formula that works is 16/40 that is a tc3 gear set is.The only way to get it with 39 tooth ring gear is a 15.6 pinion.
Snowy.
I know we all love the Pro4 here, but heres my question.
I assume that certain cars are perceived as 1st class cars, and then tehre are the next level down, and so on...
The Pro4 if not the best, then one of the best 1/10 EP cars.
Which cars are at the top with the Pro4, and which would fall in the classes below?
I hope this makes sense?
I assume that certain cars are perceived as 1st class cars, and then tehre are the next level down, and so on...
The Pro4 if not the best, then one of the best 1/10 EP cars.
Which cars are at the top with the Pro4, and which would fall in the classes below?
I hope this makes sense?
Tech Lord
iTrader: (38)
I would think that any TC over the price of $250 would be in the same "class" as the Pro4,05FK,RDX,415MXS..etc
I have a fan!
Hi
To all that have that have kindly purchased Cool-Can-Fan's for their cars. We now have a NEW L K website
Cheers Malc (The-Cool-Can-Fan-Man)
www.coolcanfan.com
To all that have that have kindly purchased Cool-Can-Fan's for their cars. We now have a NEW L K website
Cheers Malc (The-Cool-Can-Fan-Man)
www.coolcanfan.com
Tech Master
Originally Posted by Entropy
I have a fan!
Tech Champion
iTrader: (9)
Originally Posted by Trakside Trucke
Hi
To all that have that have kindly purchased Cool-Can-Fan's for their cars. We now have a NEW L K website
Cheers Malc (The-Cool-Can-Fan-Man)
www.coolcanfan.com
To all that have that have kindly purchased Cool-Can-Fan's for their cars. We now have a NEW L K website
Cheers Malc (The-Cool-Can-Fan-Man)
www.coolcanfan.com
what size fans do they accept.. for the Pro4 of course..
Tech Master
Does anybody make aluminum bulkheads for the Pro4?
Tech Champion
iTrader: (9)
Originally Posted by John Warner
Does anybody make aluminum bulkheads for the Pro4?
I've asked HPI if there is any plans for aluminum bulkhead like the evo's and SD's... they have no plans to do so...
Tech Master
Well hopefully somebody like shooters or another company will step up!
Tech Master
iTrader: (14)
John:
Get Diggity to make some.
Get Diggity to make some.
Tech Master
Hey Tim, that's a great idea! Why didn't I think of that? Must be why you get paid the BIG bucks!! Thanks for the help!!!!
why would you want AL bulkheads? any benefits will be outweighed by the substantial weight increase (at least if you keep it fully sealed, and if you dont keep it sealed you're REALLY sacrificing and even then i doubt you could get the weigh equally light as crp)
the dhi 05' setup seems to be good for one-way tracks (flowey and non super sharp corners). its one of the only setups i've seen to use anti-dive in the front which to me reinforces that it was made for higher speed tracks (anti-dive to prevent too much front weight xfer). seems to be made to have fast cornering speeds.
for small tracks i dont think its the ticket because of the one-way. and if you swap out the one-way you're gonna change the handlig characteristic so much that you'd prolly do better to find a spool setup as a baseline instead of this one.
the dhi 05' setup seems to be good for one-way tracks (flowey and non super sharp corners). its one of the only setups i've seen to use anti-dive in the front which to me reinforces that it was made for higher speed tracks (anti-dive to prevent too much front weight xfer). seems to be made to have fast cornering speeds.
for small tracks i dont think its the ticket because of the one-way. and if you swap out the one-way you're gonna change the handlig characteristic so much that you'd prolly do better to find a spool setup as a baseline instead of this one.
Originally Posted by floodo1
why would you want AL bulkheads? any benefits will be outweighed by the substantial weight increase (at least if you keep it fully sealed, and if you dont keep it sealed you're REALLY sacrificing and even then i doubt you could get the weigh equally light as crp)
Originally Posted by ChadCapece
Come on floodo1, you of all people should know, it's all about the bling bling. And possibly more freespin from the precise bearings alignment.
-Josh