birdy

im currently charging my gp 3300s on a cell master platinium and think im doing someting wrong as my batts are only peaking at 2100mah
4.5a
delta peak 3
temp cutoff 48 c
cutoff 3800
thanks

Joel Lagace

iTrader: (4)

should be ok, im assuming 3 = 3mv? Anyway you should be ok up to 5-6amps as well


Are you making sure that your starting with a fully discharged battery? Dump it and tray it then charge it for max charge capacity

Uga

Are the cells warm after charge? If not, try using the long lockout function on cell master, set it to like ~25 mins or so. If they are warm after charge, I would recommend looking up new cells, these are a bit outdated anyway..

imel24

iTrader: (10)

make sure you have the batts discharged enough before you charge them, you can also try increasing delta voltage.

Joel Lagace

iTrader: (4)

Ya dont be affraid to up the delta, the GP3300s ran much higher deltas then any other nihm out there. I used to run 5-7mv per cell with success.

birdy

thanks for the info guys ive whaked my delta peak up to 7 and they are only false peaking right at the start and are now peaking at 2600
thanks