Ce t35 outdated?
07-08-2007, 09:55 AM
#1
Ce t35 outdated?
Does this older charger have a limit on mahr -mwhr Ihave noticed my 4200s are only charging to 3800 or so even though they peak around 6.00 on a four cell pack and are the right temp? Can some one share some imformation on this thanks.
07-08-2007, 08:05 PM
#2
The turbo 35 from competition electrics is far from being outdated.
The crew at CE revise the software and have updates... they are even close to an update that will allow the 35 to charge lipos.
If your not getting a full charge , feel free to call CE and talk with Jim. Maybe you have your charger incorrectly set. And if your running IB 4200 you might have a dead cell or your packs just might not be in as good a shape as you think they are..
CE is the most customer friendly company you are going to find in rc. They are great people and are always improving on there equipment.
The crew at CE revise the software and have updates... they are even close to an update that will allow the 35 to charge lipos.
If your not getting a full charge , feel free to call CE and talk with Jim. Maybe you have your charger incorrectly set. And if your running IB 4200 you might have a dead cell or your packs just might not be in as good a shape as you think they are..
CE is the most customer friendly company you are going to find in rc. They are great people and are always improving on there equipment.
07-08-2007, 08:24 PM
#4
Tech Adept
35's
I know this is a little off topic but any chance of CE coming out with a new charger that may be a little smaller in size?? I've always wanted to get a GFX but the damn things are the size of Texas
07-09-2007, 06:10 PM
#6
Main problem, and what the update helped with was for cycling. After charging the battery, the voltage would hold higher than a value programed in the chip. That has been altered, and works great now.
As for under charging, I would double check the cells. Have they been equalized? Are the settings in the t35 set correctly? I use .02 - .03 drop back if over 5.5 amp. and .04 if 5.5 amp. Do they take a full charge on another charger?
Good luck
As for under charging, I would double check the cells. Have they been equalized? Are the settings in the t35 set correctly? I use .02 - .03 drop back if over 5.5 amp. and .04 if 5.5 amp. Do they take a full charge on another charger?
Good luck
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
