5LikesAlex Racing Barracuda R2 & R3
11-07-2003, 04:03 PM
#6646
Originally posted by AWOLsoldier
Rainbow10 just informed me that they're all out of the R2!
Back to the drawing board.
Rainbow10 just informed me that they're all out of the R2!
Back to the drawing board.
I was quoting the classic Queen song, Bohemian Rapsidy
11-07-2003, 04:03 PM
#6647
Originally posted by Herminator
....
Also, I don't suppose anyone has the part number handy for the kyosho spacers used to shim the small bevel gears?
....
Also, I don't suppose anyone has the part number handy for the kyosho spacers used to shim the small bevel gears?
here's Kyosho's
http://www2.towerhobbies.com/cgi-bin...?&I=LXV114&P=7
11-07-2003, 06:24 PM
#6648
Originally posted by Herminator
More titanium installed
Also got that stupidly tight servo saver column collar off, jeez it was like it had rusted on solid, a pair of pliers and I was still close to pulling a tit muscle
thank goodness the blue replacement went on easyish.
Anyway time for a question, how many spacers do most of you guys use on top of the Xenon alloy hubs, front and rear?
Also, I don't suppose anyone has the part number handy for the kyosho spacers used to shim the small bevel gears?
Cheers in advance.
I'm sure I'll think of something else later too, back to the big rebuild......
More titanium installed
Also got that stupidly tight servo saver column collar off, jeez it was like it had rusted on solid, a pair of pliers and I was still close to pulling a tit muscle
thank goodness the blue replacement went on easyish.Anyway time for a question, how many spacers do most of you guys use on top of the Xenon alloy hubs, front and rear?
Also, I don't suppose anyone has the part number handy for the kyosho spacers used to shim the small bevel gears?
Cheers in advance.
I'm sure I'll think of something else later too, back to the big rebuild......
or it you can find a 1.5mm shim thats even better
-Dave
11-07-2003, 09:57 PM
#6649
Tech Adept
HELP!!!!!!!
Help guys
Im installing the servo in the R2 and it ends up right next to the steering assembly, so close in fact that it appears as though it will not have full travel to the right.
what servos will fit ???
Im using a JR XR3 radio and JR servos, the servo is a 4750 high speed, but it has kind of a longer "nose", where the gears protrude from the front of the servo.
Do I need a certain type or size of servo
The testing of the car in the october xtreme rc uses a KO 2123 and visually it appears shorter in the "nose"
Help Guys
Ive got two perfect JR servos that wont fit
Im installing the servo in the R2 and it ends up right next to the steering assembly, so close in fact that it appears as though it will not have full travel to the right.
what servos will fit ???
Im using a JR XR3 radio and JR servos, the servo is a 4750 high speed, but it has kind of a longer "nose", where the gears protrude from the front of the servo.
Do I need a certain type or size of servo
The testing of the car in the october xtreme rc uses a KO 2123 and visually it appears shorter in the "nose"
Help Guys
Ive got two perfect JR servos that wont fit
11-07-2003, 10:00 PM
#6650
Tech Adept
can I use a digital servo with XR3 or do I need to use an analog servo
can I use the Ko servo's with XR3 radio???
can I use the Ko servo's with XR3 radio???
11-07-2003, 10:46 PM
#6656
Tech Adept
Any help with my servo dilema???????
I'll need to order a servo sat morning if i want to get it first of the week,
Im really stuck !!!
Help guys
Im installing the servo in the R2 and it ends up right next to the steering assembly, so close in fact that it appears as though it will not have full travel to the right.
what servos will fit ???
Im using a JR XR3 radio and JR servos, the servo is a 4750 high speed, but it has kind of a longer "nose", where the gears protrude from the front of the servo.
Do I need a certain type or size of servo
The testing of the car in the october xtreme rc uses a KO 2123 and visually it appears shorter in the "nose"
Help Guys
Ive got two perfect JR servos that wont fit
Im really stuck !!!
Help guys
Im installing the servo in the R2 and it ends up right next to the steering assembly, so close in fact that it appears as though it will not have full travel to the right.
what servos will fit ???
Im using a JR XR3 radio and JR servos, the servo is a 4750 high speed, but it has kind of a longer "nose", where the gears protrude from the front of the servo.
Do I need a certain type or size of servo
The testing of the car in the october xtreme rc uses a KO 2123 and visually it appears shorter in the "nose"
Help Guys
Ive got two perfect JR servos that wont fit
11-08-2003, 02:20 AM
#6657
JIMC- I don't think there should be any problem, although it seemed close to causing a problem on my Xenon chassis last night when I placed my KO servo on it. I'll fit it properly later and see how much servo travel there is and if it does cause a problem. Also make sure you have the ball link on the side the faces the rear of the car.
Just got a suprising phone call
my MRT speedo has been repaired and will be sent back on Monday The post must have taken over two and a half weeks Atleast MRT are great for doing cheap repairs Need to sell it now though 
Just got a suprising phone call
my MRT speedo has been repaired and will be sent back on Monday The post must have taken over two and a half weeks Atleast MRT are great for doing cheap repairs Need to sell it now though
11-08-2003, 02:54 AM
#6658
Tech Master
Originally posted by JDM_DOHC_SiR
Hermi got his today...you should have yours today if not tommorow
-Dave
Hermi got his today...you should have yours today if not tommorow
-Dave