Xray T2'007
#1561
Originally Posted by HarshGuy
You'll have your chance next Saturday, I plan on running stock ...so does Dal.
Gotta see your BL wiring layout on the 007. Can we see a pic? Pleeeeeeze.
#1562
Tech Elite
iTrader: (6)
Originally Posted by Still Bill
Geeeeeeze...You two pickin' on us little guys! Maybe I should leave my CO27 in so I can add that to the Racer's Excuse Database.
Gotta see your BL wiring layout on the 007. Can we see a pic? Pleeeeeeze.
Gotta see your BL wiring layout on the 007. Can we see a pic? Pleeeeeeze.
wiring ...Still working on it ....have to let the shoe goo "set" before moving on to the next steps :-) ...I'll shoot some pics when it's done though.
#1564
R/C Tech Elite Member
iTrader: (101)
OK! So here is teh deal!
Bot my 007 last week, I am running a slight different setup then Travis Shrevens Stock Setup. When i was building the kit, I have 1.5mm inner shims on the suspension holders all around. I put another shim in the back to add more toe in.
Well the hubs are already 1* of toe-in, and i added a 1.5mm shim in teh back to give it 2.5* toe in. well im looking at the setup sheet more closely now and it says..
Shim / MM
1.5 2*
1.15 1.5*
.75 1*
So if i added a 1.5 shim, im actually running 3* of rear toe in!? the kit didnt come with any other shims i believe? or did it?
Bot my 007 last week, I am running a slight different setup then Travis Shrevens Stock Setup. When i was building the kit, I have 1.5mm inner shims on the suspension holders all around. I put another shim in the back to add more toe in.
Well the hubs are already 1* of toe-in, and i added a 1.5mm shim in teh back to give it 2.5* toe in. well im looking at the setup sheet more closely now and it says..
Shim / MM
1.5 2*
1.15 1.5*
.75 1*
So if i added a 1.5 shim, im actually running 3* of rear toe in!? the kit didnt come with any other shims i believe? or did it?
#1567
Originally Posted by HarshGuy
Here's pics of the wiring
Thanks.
#1571
Tech Elite
iTrader: (6)
Originally Posted by racenut123
I did the same thing except I left the inner holders to keep the battery from being pushed in in case of a side impact.
Harshguy's secret shame is the medeocre voltage of his batteries! SHAME!!!!!!
Harshguy's secret shame is the medeocre voltage of his batteries! SHAME!!!!!!
LOL ...yep that's me Mr. Mediocraty
BSchor ..nice wiring job ..I had a helluva time trying to make all that brushles stuff fit in there, I swear that speed control is bigger than most states!! ...would have been a much easier job if I was wiring brushed with my KO VFS1's.
#1575
Tech Elite
iTrader: (6)
Originally Posted by BSchorr
Cant wait to get that 9550 servo and then shorten them dam wires!