52LikesTeam Losi JRXS Type-R
08-23-2010, 03:18 PM
Thank you Ed!
08-23-2010, 04:14 PM
Tech Fanatic
iTrader: (66)
Topdeck
Ed, that topdeck sure looks thin between the batt terminal and the servo horn! I run my car also with no uprights, but was experimenting one night and installed the uprights and that is where my topdeck broke. Be carefull!
08-23-2010, 05:33 PM
It happened to me the other day in that same thin area, im running lipos that have the wires coming out of the top of the pack and you need to open that area up on the top deck, i see some lipos have the leads coming out from the side, that would be better for us so we could leave the top deck with more thickness in that area.
We have got state titles on this weekend with a few JRXS Rs running, makes a change from only having one Losi running at a meet.
We have got state titles on this weekend with a few JRXS Rs running, makes a change from only having one Losi running at a meet.
08-23-2010, 10:09 PM
For thoose interested, some pics of my car (excuse the grass!)... really not anything special in terms of layout. Electrics used;
ESC: De-cased Mamaba Max Pro
Servo: Spektrum 6040 (Full size)
Reciever: Spektrum micro Pro
Motor: X12 10.5
PT: MRT iPT
Cells: IP5000 50C
Extra: Castle CC-BEC
Shell's generally a Speed6 LWT, although it's a little beefed up with some internal bracing, and fender mender on the front arches... thankfully it's gonna be able to see out the season!
ESC: De-cased Mamaba Max Pro
Servo: Spektrum 6040 (Full size)
Reciever: Spektrum micro Pro
Motor: X12 10.5
PT: MRT iPT
Cells: IP5000 50C
Extra: Castle CC-BEC
Shell's generally a Speed6 LWT, although it's a little beefed up with some internal bracing, and fender mender on the front arches... thankfully it's gonna be able to see out the season!
Anyway there must be some trick in your setup as my car has lighter gear but weighs more. Possible your electronics are lighter than you think.
08-23-2010, 10:13 PM
It happened to me the other day in that same thin area, im running lipos that have the wires coming out of the top of the pack and you need to open that area up on the top deck, i see some lipos have the leads coming out from the side, that would be better for us so we could leave the top deck with more thickness in that area.
We have got state titles on this weekend with a few JRXS Rs running, makes a change from only having one Losi running at a meet.
We have got state titles on this weekend with a few JRXS Rs running, makes a change from only having one Losi running at a meet.
08-24-2010, 12:37 AM
Rhys
08-24-2010, 02:59 AM
Just noticed Horizon Hobby re-posted the old vid for the Type R earlier this month.
You Tube Type R vid
Hmm....a good sign?
You Tube Type R vid
Hmm....a good sign?
08-24-2010, 04:18 AM
Great result by Mr. Delves this weekend. I watched him and he was flying! Ed, we'd like to see a setup please!
That's it now for my Nationals season with the XRAY, looking at a top 30 place overall, I'll be very happy with that!
I have to make the decision now on what to race over the winter and into next season. Probably the Losi as it's so much quicker on carpet.
That's it now for my Nationals season with the XRAY, looking at a top 30 place overall, I'll be very happy with that!
I have to make the decision now on what to race over the winter and into next season. Probably the Losi as it's so much quicker on carpet.
08-24-2010, 05:30 AM
I am getting really excited for our carpet season to start up again and dust off the Type R.
So excited, I bought another. This one came with short arms on it. Would they be out of the question on a rubber tire car?
So excited, I bought another. This one came with short arms on it. Would they be out of the question on a rubber tire car?
08-24-2010, 05:49 AM
08-24-2010, 10:40 AM
08-24-2010, 11:19 AM
Tech Fanatic
iTrader: (66)
That was my problem, I was running a reedy 5000 and the bullets were to close and had to dremel to much material away on the topdeck. Now that I got a new topdeck, I also got a new lipo that has the bullets very close to the edge so there was no need to dremel that area this time
08-24-2010, 12:01 PM
JRXS Type R
If you are looking for one, I have just decided to sell all of my stuff. I never got into the on road stuff, just off road. I have a crap ton of new extra parts and a nice car. Most parts on car are red anodized. My e-mail is [email protected] and I will make you a great deal on everything. I will do roller with or without extra parts or almost ready to run minus battery and steering servo. It currently has a spektrum receiver, GTB ESC, and 17.5 novak brushless. I also have a spare diff and one way, three old but decent bodies, and new parts are still in packages.
New parts
8353 Logo Stickers
6951 Carbide Balls 3/32
9763 FRS Spindles 6 Deg EA3
3018 HD Thrust Bearing Set
9686 Alum .165 Wheel Hexs
6916 3/16 x 3/8 Ball Bearings
2-9762 FR Spindles/Carriers 4 Deg EA3
2-2908 Monster Diff SQR Spring/Screw Set
2-3968 118T/64P Kevlar Spur Gears
3329 42T Spool Pulley and Plate
6931 Bearings
3344 LCD Drive Shaft Set
3319 Diff Outdrive
3070 Tranny Drive Rings
9696 Outer Pivot Block 1 Deg
3317 Diff Tube
3338 RCD Drive Shaft Set
3066 Super Slick Assembly Grease
3328 41T Pulley and Plate
3326 Diff Pulley Set 41&42t
4320 Battery Foam
3970 128t/64p Kevlar Spur
1217 FR Susp Arms
3318 Diff Hub
9759 8 Deg Fr Spindles & Carriers GR
4239 Body Post & Bumper Set (opened)
3039 Diff Drive Rings
New parts
8353 Logo Stickers
6951 Carbide Balls 3/32
9763 FRS Spindles 6 Deg EA3
3018 HD Thrust Bearing Set
9686 Alum .165 Wheel Hexs
6916 3/16 x 3/8 Ball Bearings
2-9762 FR Spindles/Carriers 4 Deg EA3
2-2908 Monster Diff SQR Spring/Screw Set
2-3968 118T/64P Kevlar Spur Gears
3329 42T Spool Pulley and Plate
6931 Bearings
3344 LCD Drive Shaft Set
3319 Diff Outdrive
3070 Tranny Drive Rings
9696 Outer Pivot Block 1 Deg
3317 Diff Tube
3338 RCD Drive Shaft Set
3066 Super Slick Assembly Grease
3328 41T Pulley and Plate
3326 Diff Pulley Set 41&42t
4320 Battery Foam
3970 128t/64p Kevlar Spur
1217 FR Susp Arms
3318 Diff Hub
9759 8 Deg Fr Spindles & Carriers GR
4239 Body Post & Bumper Set (opened)
3039 Diff Drive Rings
08-26-2010, 06:33 AM
Are you willing to seperate parts?
08-26-2010, 09:54 AM
JRXS-R
I bought one of Greg Sharps cars last winter. I'm not racing RC anymore so it's for sale. Car, parts ,2 bodies, 6 sets of used Jaco blues $185 shipped.
check my ad on here I also have 17.5 and WGT car.
Mike
check my ad on here I also have 17.5 and WGT car.
Mike