Tekno RC EB48.3 Thread
|
|||
#586
Tech Elite
iTrader: (33)
http://thebarnfloor.com/catalog/prod...oducts_id=5902
#587
Tech Initiate
Thanks for all your advice.
Eric
Eric
#588
Tech Elite
iTrader: (16)
http://www.smc-racing.net/index.php?...ory&path=67_96
#589
i know this has probably been asked before, but im not having any luck finding anything. is there a list of things to buy to update the EB48.2 to the EB48.3 or does someone sell everything as a kit? my .2 is ready for retirement after a full season of outdoor, and i can either drop $500 on the .3 or spend a few hundred and restore my .2 but if im going to be buying parts for my .2 id rather just upgrade it to the .3 if thats possible but i dont know all the little tiny details that are different and what goes with what because they changed so much
#590
Tech Regular
iTrader: (4)
http://www.fiercercsolutions.com/main.sc
Go to this website. They have the basic conversion and more.
Go to this website. They have the basic conversion and more.
#591
Tech Regular
iTrader: (14)
This is information I found on tekno's site
EB48.3 New Parts Listing
Part # Description
TKR5006 Chassis (7075, hard anodized) *Small change to the droop pad area
TKR5071X Wheel Hubs (aluminum, lightened, gun metal ano, w/pins, 2pcs, EB48)
TKR5161 V2 Adjustable Hinge Pin Brace ("A" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5162 V2 Adjustable Hinge Pin Brace ("B" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5163 V2 Adjustable Hinge Pin Brace ("C" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5164 V2 Adjustable Hinge Pin Brace ("D" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5165 V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT)
TKR5166 Front Bumper (revised, EB/NB/ET/NT)
TKR5174 Rear Arm Mud Guards (for TKR5184 & TKR5515, EB/NB/SCT)
TKR5181 Low Profile Wing Mount & Body Mounts (EB48/NB48/EB48SL)
TKR5184 Suspension Arms (rear, EB/NB48.3) *New Geometry
TKR5187 Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs) *Straight = less flexing
TKR5191 Tapered Driveshaft (center, front, 7075 aluminum, black ano, EB48/ET48) *Stronger/truer
TKR5193 Spindles (trailing, L/R, requires TKR5194, EB/NB/ET/NT48, EB/NB.3) *New Geometry
TKR5194 Spindle Carriers (trailing, 15 degree, L/R, EB/NB/ET/NT48, EB/NB.3) *New Geometry
TKR5199 Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3) *New Geometry
TKR5259 Decal Sheet (EB48.3)
TKR5260 CNC Split Cntr Diff Mount (mtr mnt only, 7075, gun metal ano, EB/ET/SCT)
TKR5263 Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL)
TKR5268 Shock Tower (front, 7075 CNC, gun metal ano, EB/NB48.3) *New Geometry
TKR5269 Shock Tower (rear, 7075 CNC, gun metal ano, EB/NB48.3) *New Geometry
TKR5286 Suspension Arms (front, EB/NB48.3) *New Geometry
TKR5491 Sway Bar (2.4mm, rear)
TKR6003 Shock Caps (aluminum, gun metal ano, 2pcs, EB48)
TKR6033 Shock Spring Set (rear, 1.4 x 9.5T, 85mm)
TKR6048 Shock Spring Set (front, 1.5 x 9.5T, 65mm, black)
TKR6060 Shock Body (rear, x*long, aluminum, hard ano, 2pcs)
TKR6061 Shock Shafts (rear, x*long, steel, 2pcs)
TKR6140 Locking Shock Rod End and Spring Perch Set (EB/NB/ET/NT/SCT)
TKR6144 Shock Boots (long length, rear EB/NB/SCT, front ET/NT, 2pcs)
TKR6145 Shock Boots (X*long length, rear EB/NB, 2pcs)
TKR1238 Droop Adjustment Screws (M4x10mm, 8pcs)
TKR1240 Lower Shock Mount Screws (2 CW thread, 2 CCW thread, EB/NB/SCT)
TKR1605 M3x10mm Set Screws (black, 10pcs) *May not be needed. Included with TKR6140
EB48.3 New Parts Listing
Part # Description
TKR5006 Chassis (7075, hard anodized) *Small change to the droop pad area
TKR5071X Wheel Hubs (aluminum, lightened, gun metal ano, w/pins, 2pcs, EB48)
TKR5161 V2 Adjustable Hinge Pin Brace ("A" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5162 V2 Adjustable Hinge Pin Brace ("B" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5163 V2 Adjustable Hinge Pin Brace ("C" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5164 V2 Adjustable Hinge Pin Brace ("D" block, 7075 CNC aluminum, EB/NB/ET/NT/SCT)
TKR5165 V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT)
TKR5166 Front Bumper (revised, EB/NB/ET/NT)
TKR5174 Rear Arm Mud Guards (for TKR5184 & TKR5515, EB/NB/SCT)
TKR5181 Low Profile Wing Mount & Body Mounts (EB48/NB48/EB48SL)
TKR5184 Suspension Arms (rear, EB/NB48.3) *New Geometry
TKR5187 Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs) *Straight = less flexing
TKR5191 Tapered Driveshaft (center, front, 7075 aluminum, black ano, EB48/ET48) *Stronger/truer
TKR5193 Spindles (trailing, L/R, requires TKR5194, EB/NB/ET/NT48, EB/NB.3) *New Geometry
TKR5194 Spindle Carriers (trailing, 15 degree, L/R, EB/NB/ET/NT48, EB/NB.3) *New Geometry
TKR5199 Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3) *New Geometry
TKR5259 Decal Sheet (EB48.3)
TKR5260 CNC Split Cntr Diff Mount (mtr mnt only, 7075, gun metal ano, EB/ET/SCT)
TKR5263 Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL)
TKR5268 Shock Tower (front, 7075 CNC, gun metal ano, EB/NB48.3) *New Geometry
TKR5269 Shock Tower (rear, 7075 CNC, gun metal ano, EB/NB48.3) *New Geometry
TKR5286 Suspension Arms (front, EB/NB48.3) *New Geometry
TKR5491 Sway Bar (2.4mm, rear)
TKR6003 Shock Caps (aluminum, gun metal ano, 2pcs, EB48)
TKR6033 Shock Spring Set (rear, 1.4 x 9.5T, 85mm)
TKR6048 Shock Spring Set (front, 1.5 x 9.5T, 65mm, black)
TKR6060 Shock Body (rear, x*long, aluminum, hard ano, 2pcs)
TKR6061 Shock Shafts (rear, x*long, steel, 2pcs)
TKR6140 Locking Shock Rod End and Spring Perch Set (EB/NB/ET/NT/SCT)
TKR6144 Shock Boots (long length, rear EB/NB/SCT, front ET/NT, 2pcs)
TKR6145 Shock Boots (X*long length, rear EB/NB, 2pcs)
TKR1238 Droop Adjustment Screws (M4x10mm, 8pcs)
TKR1240 Lower Shock Mount Screws (2 CW thread, 2 CCW thread, EB/NB/SCT)
TKR1605 M3x10mm Set Screws (black, 10pcs) *May not be needed. Included with TKR6140
#592
Tech Rookie
hi eb48.3 guys,
someone a good shock setup for loamy, bumpy,outblown tracks?
i think, that the orange spring in the rear is to hard, with stock setup(450oil, 1,8x4piston)
someone a good shock setup for loamy, bumpy,outblown tracks?
i think, that the orange spring in the rear is to hard, with stock setup(450oil, 1,8x4piston)
#593
Tech Master
iTrader: (33)
http://www.teknorc.com/tekno5/wp-con...0Bumpy_Dry.pdf
#594
Tech Rookie
Thanks.. Ok.rear softer.And you drive pink in front ? Pink is a little bit harder as black ...
Last edited by scgu; 11-03-2015 at 04:15 AM.
#596
Tech Master
i know this has probably been asked before, but im not having any luck finding anything. is there a list of things to buy to update the EB48.2 to the EB48.3 or does someone sell everything as a kit? my .2 is ready for retirement after a full season of outdoor, and i can either drop $500 on the .3 or spend a few hundred and restore my .2 but if im going to be buying parts for my .2 id rather just upgrade it to the .3 if thats possible but i dont know all the little tiny details that are different and what goes with what because they changed so much
That kit will give you the new suspension geometry, but you won't have full .3 adjustability. That being said, just the upgrade is a NICE addition.
To get the suspension adjustability, go here. http://www.fiercercsolutions.com/SCT...kit-FRC008.htm and that will complete you, so you can use all the .3 upgrade sheets.
Only other thing that isn't necessary, but is nice, is the split center diff. http://www.fiercercsolutions.com/TKR...un-TKR5261.htm That's for the aluminum one. They have a composite that will save you a few bucks. But if your gonna spend the money, just do the aluminum.
#597
Tech Initiate
I just got my kit. The build seems pretty easy to follow and build.
#599
Just grabbed .3 kits (eb,et,sct) are there any part issues still drive shafts etc to worry about or is all that fixed? I'm not going to be able to race these kits until Rama in Feb so I'd like to get ahead of issues so I can have Fun racing at the event. TY Several guys were having issues w/ shafts at the end of the summer locally, only reason I'm asking.
#600
Just grabbed .3 kits (eb,et,sct) are there any part issues still drive shafts etc to worry about or is all that fixed? I'm not going to be able to race these kits until Rama in Feb so I'd like to get ahead of issues so I can have Fun racing at the event. TY Several guys were having issues w/ shafts at the end of the summer locally, only reason I'm asking.