Big Bearing to the V-Spec
10-09-2005, 02:46 PM
#1
Big Bearing to the V-Spec
Hi !!!
Im "calling" from a little country named Sweden now, im trying to find out what size it is on the big bearing in the V-Spec. My friends are not shur if it is 25mm or 25.4mm. Can you help me on this.
And now, were do i buy this bearing????
I know one page, and it is www.vxb.com, do you have a better page i can look at ???
Ulf from sweden
Im "calling" from a little country named Sweden now, im trying to find out what size it is on the big bearing in the V-Spec. My friends are not shur if it is 25mm or 25.4mm. Can you help me on this.
And now, were do i buy this bearing????
I know one page, and it is www.vxb.com, do you have a better page i can look at ???
Ulf from sweden
10-09-2005, 07:14 PM
#2
Tech Master
iTrader: (14)
the big bearing, known as the rear, is 25.4 mm.
I take it your bearing failed on you too? Alot of us over hear have had that problem too. Make sure your piston/sleeve are still in good condition.
check out boca bearings, these guys make some of the best bearings around.
here is the link - vz-b bearings
I take it your bearing failed on you too? Alot of us over hear have had that problem too. Make sure your piston/sleeve are still in good condition.
check out boca bearings, these guys make some of the best bearings around.
here is the link - vz-b bearings
10-09-2005, 11:07 PM
#3
Originally Posted by o.s. power
the big bearing, known as the rear, is 25.4 mm.
I take it your bearing failed on you too? Alot of us over hear have had that problem too. Make sure your piston/sleeve are still in good condition.
check out boca bearings, these guys make some of the best bearings around.
here is the link - vz-b bearings
I take it your bearing failed on you too? Alot of us over hear have had that problem too. Make sure your piston/sleeve are still in good condition.
check out boca bearings, these guys make some of the best bearings around.
here is the link - vz-b bearings
I found a bocabearing here to, do you know anything about the "store"
http://www.amainhobbies.com/product_...46b53d5f9b3d81
Do you know anything about vxb.com http://www.vxb.com/page/bearings/CTGY/14mm
Thx again for everything
//
Sweden
10-09-2005, 11:52 PM
#4
When I had the OS VZB The rear bearing use to fail. I replaced them with the Novarossi one then never had a problem after that. The bearing is the 25.4mm
10-10-2005, 12:13 AM
#5
Originally Posted by chrispy
When I had the OS VZB The rear bearing use to fail. I replaced them with the Novarossi one then never had a problem after that. The bearing is the 25.4mm
A little OT here, if i want a new piston and cylinder to my V-Spec, do you people over there have any good and cheap web site i can check out
10-10-2005, 12:23 AM
#6
Piston and Sleeve use to cost me about $180 - $200 Aus which is about half price of the motor. But that was a couple of years ago.
10-10-2005, 08:50 AM
#7
Tech Master
iTrader: (14)
Originally Posted by R1 Uffe
thx OS Power for the answer, my bearing has not faild yet, im trying to get a new bearing if its failīs. Over here you buy a new bearing for 55$ and in USA you buy it for more then the half price.
I found a bocabearing here to, do you know anything about the "store"
http://www.amainhobbies.com/product_...46b53d5f9b3d81
I found a bocabearing here to, do you know anything about the "store"
http://www.amainhobbies.com/product_...46b53d5f9b3d81
amainhobbies from what i heard is a good company to do business with.
10-10-2005, 07:45 PM
#8
Kendall Bennett from A Main Hobbies is great to deal with. He has a great store and is very willing to help. Kendall is also a racer.
10-10-2005, 09:00 PM
#9
Suspended
hej D1uffe hur e de me 1/8th off road, gar du till furelund off road banan? jag bara vill veta om ni comer at ha nagra competitions nesta aret Oct-Nov. ferlat om min svensk e daligt, jag har inte varit e Malmo 8 ar och casterracing behover nagon e sweden som can vara distributor, om du eller nagaon som har bra experience me 1/8th offroad vill sa can du ga till Casterracing.com och skriva pa engelska till head office.
10-10-2005, 11:58 PM
#10
Originally Posted by rinkeberg
hej D1uffe hur e de me 1/8th off road, gar du till furelund off road banan? jag bara vill veta om ni comer at ha nagra competitions nesta aret Oct-Nov. ferlat om min svensk e daligt, jag har inte varit e Malmo 8 ar och casterracing behover nagon e sweden som can vara distributor, om du eller nagaon som har bra experience me 1/8th offroad vill sa can du ga till Casterracing.com och skriva pa engelska till head office.
10-11-2005, 12:13 AM
#11
Tech Regular
Originally Posted by R1 Uffe
thx OS Power for the answer, my bearing has not faild yet, im trying to get a new bearing if its failīs. Over here you buy a new bearing for 55$ and in USA you buy it for more then the half price.
I found a bocabearing here to, do you know anything about the "store"
http://www.amainhobbies.com/product_...46b53d5f9b3d81
Do you know anything about vxb.com http://www.vxb.com/page/bearings/CTGY/14mm
Thx again for everything
//
Sweden
I found a bocabearing here to, do you know anything about the "store"
http://www.amainhobbies.com/product_...46b53d5f9b3d81
Do you know anything about vxb.com http://www.vxb.com/page/bearings/CTGY/14mm
Thx again for everything
//
Sweden
hi
boca is good tried and tested.
but i had problem with bocas ceramic bearing. after 1 race there was lots of play in it already. i told them, they said return it and they may replace it. i living in australia, couldnt be bothered half way across the world and waiting a month for it to come back. i expect a bit more from a $50 bearing!
i have also tried vxb bearing, they dont seem to roll that free, not bad though, it has stayed very tight after about 1 gallons use. and no play.
10-11-2005, 03:19 AM
#12
Originally Posted by qwerty
hi
boca is good tried and tested.
but i had problem with bocas ceramic bearing. after 1 race there was lots of play in it already. i told them, they said return it and they may replace it. i living in australia, couldnt be bothered half way across the world and waiting a month for it to come back. i expect a bit more from a $50 bearing!
i have also tried vxb bearing, they dont seem to roll that free, not bad though, it has stayed very tight after about 1 gallons use. and no play.
boca is good tried and tested.
but i had problem with bocas ceramic bearing. after 1 race there was lots of play in it already. i told them, they said return it and they may replace it. i living in australia, couldnt be bothered half way across the world and waiting a month for it to come back. i expect a bit more from a $50 bearing!
i have also tried vxb bearing, they dont seem to roll that free, not bad though, it has stayed very tight after about 1 gallons use. and no play.
10-11-2005, 04:04 AM
#13
Suspended
ok thanx Uffe will do.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
