otter

iTrader: (1)

It does and it doesn't. It does not reverse the motor rotation in the sense that you need to reverse the rotation in your ESC or change motor phasing. It does in the sense that the motor is rotating opposite in relation to the car direction.

Wildcat1971

iTrader: (84)

yeah, there was something about the HD axles changing the width also. I dont understand all of these changes and why. what are they fixing on the car? Is all of this just to use the HD axles?



#91608
• Used for B5M/T5M
• Makes rear pivot 4mm wider. (requires flipping insert in D plate)
• Gives improved stability
• Recommended to use with #91609

#91609
• Used for B5M/T5M
• Requires HD rear axle (71019)
• Reduces vehicle width by 4mm from stock width
• Recommended to use with #91608


Part #: 71019
Heavy Duty CVA Axle

Matt Trimmings

iTrader: (170)

I dont think that the HD axles are changing the width of the car...but you have to use the AE 7.0mm offset hexes with the HD axles due to the increased diameter of the HD axles (this is on the B5m).

Wildcat1971

iTrader: (84)

Matt, so what do you think the net gain is?

Matt Trimmings

iTrader: (170)

I've never really messed around with the wide pivot vs std pivot. It was a kyosho thing that was used with the Rb5/6 series.

JDM_DOHC_SiR

iTrader: (31)

???

The bearing size is the same 6x13x5.. B5M/B5M Lite... and possible the same for the T5M since the axle is the same..

Maybe the HD axles are heat treated....??

Matt Trimmings

iTrader: (170)

You can see that they taper down after the bearing. I dont believe that the HD axles taper down until the thread.

JDM_DOHC_SiR

iTrader: (31)

Looks like that step is gone on the HD Axle...hmmm.

B5/B5m Axle



B5m Lite/T5m Axle

Matt Trimmings

iTrader: (170)

They look thicker as they go out to the thread compared to the old

jpcopeland1

iTrader: (166)

Shiney....

Socket

iTrader: (61)

Won't matter much to me about the axles. I've had great luck with the Ti units.

Socket

iTrader: (61)

JDM_DOHC_SiR

iTrader: (31)

Wildcat1971

iTrader: (84)

what are we looking at?

JDM_DOHC_SiR

iTrader: (31)

Tanner Denney's T5M ... it the non box form