TLR TEN-SCTE 2.0 Kit Thread
#3856
Can some of you guys tell me what spares to get if I get the 2.0?
#3857
Tech Fanatic
iTrader: (13)
I assume this will not fit the 2.0 even though Amain says it does?
http://www.amainhobbies.com/product_...ter-Driveshaft
http://www.amainhobbies.com/product_...ter-Driveshaft
#3858
Tech Adept
Hay guys
I like playing around with different setups a lot, maybe to much. I was looking at Dakotah's setup from the cactus. I know it was for high bite tracks but do you think it would be good for a moist, clay track? It's usually medium to high bite clay, dirt mix.
I like playing around with different setups a lot, maybe to much. I was looking at Dakotah's setup from the cactus. I know it was for high bite tracks but do you think it would be good for a moist, clay track? It's usually medium to high bite clay, dirt mix.
#3859
Tech Adept
#3860
Tech Master
iTrader: (9)
I assume this will not fit the 2.0 even though Amain says it does?
http://www.amainhobbies.com/product_...ter-Driveshaft
http://www.amainhobbies.com/product_...ter-Driveshaft
#3861
#3865
Tech Regular
iTrader: (7)
My front and center diff out drives have some play. I think its in the acceptable range. One of the rears is horrible sloppy. Bad enough that it is making gear grinding noises when hard braking. Oddly enough it makes no noise while accelerating. Probably just gonna hafta tear it down and see what's going on...
#3866
the 2 hole pistons allow for more pack and the set-up is on the first post of this thread for the set-up info...
I wish Ryan would update the name of the thread that says READ FIRST POST for up-to-date info....like the 22sct has so people check that first post and would find the info 90% of the time that they wanted
I wish Ryan would update the name of the thread that says READ FIRST POST for up-to-date info....like the 22sct has so people check that first post and would find the info 90% of the time that they wanted
You say if I use these pistons I will get more pack, so I guess my question is what is pack?, And why do I need it, wouldn't I get the same results by just using a thicker or thinner fluid in my shocks?.
#3867
Tech Master
iTrader: (9)
I did see the setup sheet on the first page of this thread, but before that when I was going through this thread I saw somebody mentioned that they were using the two hole pistons from the 22 and getting good results.
You say if I use these pistons I will get more pack, so I guess my question is what is pack?, And why do I need it, wouldn't I get the same results by just using a thicker or thinner fluid in my shocks?.
You say if I use these pistons I will get more pack, so I guess my question is what is pack?, And why do I need it, wouldn't I get the same results by just using a thicker or thinner fluid in my shocks?.
As for the pack...Hopefully someone will chime in and give a better explaination than i ever could, lol! I just kno alot say its the hot ticket...
#3868
Can you use the kingheadz center diff and motor mount from the 1.0 on the 2.0?
#3869
I did see the setup sheet on the first page of this thread, but before that when I was going through this thread I saw somebody mentioned that they were using the two hole pistons from the 22 and getting good results.
You say if I use these pistons I will get more pack, so I guess my question is what is pack?, And why do I need it, wouldn't I get the same results by just using a thicker or thinner fluid in my shocks?.
You say if I use these pistons I will get more pack, so I guess my question is what is pack?, And why do I need it, wouldn't I get the same results by just using a thicker or thinner fluid in my shocks?.
Try this - compare the resistance of the shock when you compress it slowly and when you compress it quickly. You want to balance your high and low speed damping to ensure you have weight transfer and shock absorption at optimal rates for your track.
#3870
Tech Elite
iTrader: (33)
Hay guys
I like playing around with different setups a lot, maybe to much. I was looking at Dakotah's setup from the cactus. I know it was for high bite tracks but do you think it would be good for a moist, clay track? It's usually medium to high bite clay, dirt mix.
I like playing around with different setups a lot, maybe to much. I was looking at Dakotah's setup from the cactus. I know it was for high bite tracks but do you think it would be good for a moist, clay track? It's usually medium to high bite clay, dirt mix.