TLR TEN-SCTE 2.0 Kit Thread
#1762
#1764
Tech Master
iTrader: (9)
yup, didnt round the top off far enough! Called horizon and they are sending them and he said we will pry know before horizon on the lower shock caps and when they are out if we want them but he said Ryan is the GO-TO guy on the info....
The rear of mine was close to rubbing and kinda did but once all together it rolls smooth...
As for the binding....take it apart and make sure all your bearings that go on the outdrives of the diffs are pushed all the way on! This was my problem with the front as it was tight when rotated to a certain spot and once the bearings were pushed all the way in(didnt realize it at first) but all was good after that.
I'm in the process of building a new TLR SCTE 2.0 kit.
My diffs themselves are smooth... feels like I got them built right.
Once the diffs are installed into their gearboxes (LOSB3104), when I fully tighten the gearbox screws, the diff binds on part of the rotation. It'll spin freely for 85% of a rotation...then it binds/slows down for the remaining 15% then frees up.
Inspecting the housing, there is VERY LITTLE clearance between the ring gear and the gearbox itself. Suspecting this as the source of the bind I shaved a bit of gearbox plastic material away and it seemed to help. I got them moving in the gearbox smoothly (or so I thought).
However, now that everything is installed onto the chasis... at least one of the three gearboxes is still binding (extra friction, not freezing) on part of the rotation.
Is this a known problem with a known fix? Will the bind work itself out after I run it for a bit (the metal ring gears chewing through whatever plastic is binding and then running free?).
Thanks in ad ance for any pointers!
My diffs themselves are smooth... feels like I got them built right.
Once the diffs are installed into their gearboxes (LOSB3104), when I fully tighten the gearbox screws, the diff binds on part of the rotation. It'll spin freely for 85% of a rotation...then it binds/slows down for the remaining 15% then frees up.
Inspecting the housing, there is VERY LITTLE clearance between the ring gear and the gearbox itself. Suspecting this as the source of the bind I shaved a bit of gearbox plastic material away and it seemed to help. I got them moving in the gearbox smoothly (or so I thought).
However, now that everything is installed onto the chasis... at least one of the three gearboxes is still binding (extra friction, not freezing) on part of the rotation.
Is this a known problem with a known fix? Will the bind work itself out after I run it for a bit (the metal ring gears chewing through whatever plastic is binding and then running free?).
Thanks in ad ance for any pointers!
As for the binding....take it apart and make sure all your bearings that go on the outdrives of the diffs are pushed all the way on! This was my problem with the front as it was tight when rotated to a certain spot and once the bearings were pushed all the way in(didnt realize it at first) but all was good after that.
#1765
Tech Rookie
For those of you waiting, hang in there the truck is worth it. The weight difference is very noticable in handling as well as the work put out to run it. 3 of us noted nearly 1000mah less use in a 5 min. Race. Motor temps are way down as well from the 1.0. Turning is also a lot more crisp.
#1766
Will the carbon center top plate fan mounts from the 1.0 fit the 2.0 the same? Something like this:
http://www.snrgraphite.com/index.php...products_id=87
http://www.snrgraphite.com/index.php...products_id=87
#1768
#1770
Tech Master
iTrader: (1)
At this point seeing every one with their 2.0 is really starting to PISS ME OFF!!!
I had a million spares from my 1.0 and very fresh parts to build a 2.0!WHERE are the parts RYAN!????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????Pegasus does not even have the kits yet!!!!!!!!!Where are the parts????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????:f laming::flamin g:I know in a month it wont even matter but this is Toy cars and I am an impatient Scrubb wanting to play with ever body else....
I had a million spares from my 1.0 and very fresh parts to build a 2.0!WHERE are the parts RYAN!????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????Pegasus does not even have the kits yet!!!!!!!!!Where are the parts????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????:f laming::flamin g:I know in a month it wont even matter but this is Toy cars and I am an impatient Scrubb wanting to play with ever body else....