Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#6212
Tech Champion
iTrader: (73)
Love this car, was able to TQ 13.5 open with a 17.5 boosted, messed up my start, and got back up to 2nd I couldn't put a run together in 17.5 blinky and ended up in the B, but the car was there, only changed tires all day! I'm going to try out mid motor, the indoor season is pretty much done, can't hurt to try it now.
#6213
Love this car, was able to TQ 13.5 open with a 17.5 boosted, messed up my start, and got back up to 2nd I couldn't put a run together in 17.5 blinky and ended up in the B, but the car was there, only changed tires all day! I'm going to try out mid motor, the indoor season is pretty much done, can't hurt to try it now.
#6215
Tech Elite
iTrader: (13)
I know mid motor is super hot right now, but I've been working on a setup for the rear motor RB6 that uses ALL RB6 PARTS. I'm tired of buying old gen car parts to put on my new car so I came up with this with the help of my buddy Shaun.
I don't feel that the 521-1 are faster than the RB6 arms...maybe they feel easier to drive, but slower on the clock for the most part.
Try the whole setup and let me know what you guys think. Adjust ballstud washers accordingly to your tire and grip level. Rear shock length is off the top of my head, but basically all the way up with the longest shock bottom.
Feel free to ask questions if you have em.
Thomas
I don't feel that the 521-1 are faster than the RB6 arms...maybe they feel easier to drive, but slower on the clock for the most part.
Try the whole setup and let me know what you guys think. Adjust ballstud washers accordingly to your tire and grip level. Rear shock length is off the top of my head, but basically all the way up with the longest shock bottom.
Feel free to ask questions if you have em.
Thomas
good job on the setup Thomas. lots of corner speed, great traction all around, very easy to drive!
#6217
What do the narrow lower suspension holders do vs. the wide lower suspension holders?
#6218
#6221
Are the plastic rear wide suspension hangers available without buying a transmission case for rear motor configuration? Thanks.
#6224
Tech Elite
iTrader: (13)
Thomas trans setup
http://www.rctech.net/forum/electric...l#post12001505
med/high traction.. Depends.. Lol
motor im using is a vst 8.5 geared at 22/76 with an r10 punch at 3
http://www.rctech.net/forum/electric...l#post12001505
med/high traction.. Depends.. Lol
motor im using is a vst 8.5 geared at 22/76 with an r10 punch at 3
#6225
WTB RB6
Just thought I would post up that I'm looking for one.
Thx,
Kevin
Thx,
Kevin