R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric Off-Road (https://www.rctech.net/forum/electric-off-road-4/)
-   -   GS STORM CL-1 THREAD (https://www.rctech.net/forum/electric-off-road/105519-gs-storm-cl-1-thread.html)

dan_neer78 03-12-2006 09:07 AM

GS STORM CL-1 THREAD
 
any body have any experience with one .

associatedguy 03-13-2006 04:31 PM

I don't have personal experience, but a guy at the track has one. The first week he put it on the track he won the a main. And has continued to do so since then.

Brandon Powell 03-16-2006 08:05 PM

Marty Korn finished 5th at The Dirt with a mostly stock ride. Not bad for the big pro race of the year.

I have two practice sessions on mine and will be running the first club race this weekend if it doesn't rain. Marty's set up is a very good baseline for the car. The CL-1 is very stable and tracks well. So far so good.

better 03-18-2006 06:02 AM

the CL1 is my next ride hands down

Brandon Powell 03-24-2006 03:00 PM

Guys this is my current outdoor set up I have been running.

GS Storm CL-1 (Brandon Powell)

FRONT END.................................REAR END

Shock Oil : 50wt (GS).................Shock Oil : 35wt (GS)
Piston : 1.5 mm........................Piston : 1.5 mm
Spring : Blue GS.......................Spring : Blue GS
Pre-Load : 6 mm.......................Pre-Load : 4 mm

SHock Location......................... SHock Location
Upper : 3rd hole, bottom row........Upper : 3rd hole, bottom row
Lower : Outer hole......................Lower : Middle Hole

Caster : 3mm front, 1mm rear........LINKAGE
...............................................Tow er : #3 hole
Front Roll Center: Lower hoel.........Hub : #2 hole
...............................................Hub Loc: 2mm front, 3mm rear

Servo Saver: Medium...................Wing: Upper hole
Ackerman : Middle hole

Anti Dive : -1 degree...................Anti Squat : 2 degree
Camber : -1.5 degree................Camber : 2 degree
Toe : Out, 1 degree...................Toe : 3 deg. block,1 deg. on hub

Swaybar : 2.3mm , stops flush.....Swaybar: 2.8mm,stops at 3mm
Droop : 19 mm...........................Droop : 17 mm

Diff Oil : 7000wt (GS).............................Diff Oil: 3000wt (GS)
x
Center : 10,000wt (GS)..................Brake: 30% fr. , 70% rr.

Motor: RB Mods P5x
Clutch: Aluminum, 1.0 springs
Clutch Bell: 13 t................................Fuel: Maxy's 30%

runnin rc10 03-26-2006 09:56 PM

anyone have any trips for getting the fluids in the diffs filled right? On mine, I built it...filled them. Ran the car. Took it apart again and the diffs were only about 1/4 the way full? I figured it was due to the smaller gears not letting the oil get under them?

Brandon Powell 03-27-2006 01:57 PM

Did you have any fluid leaking around the gasket or set screw ? If not it probably wasn't full .

I usually fill mine and slowly rotate the outdrive and then let it sit for a few minutes. It usually needs more to fill it after it settles.

runnin rc10 03-27-2006 06:24 PM

Yea it didnt leak any around the seal or the gasket. I think I just need to realize its gonna take more than 2 minutes :lol: I will take a little more time on them next time and see if I get better results.

Brandon Powell 03-27-2006 07:17 PM

If there were no leaks, you have what you started with.

runnin rc10 03-27-2006 07:26 PM

Yah..I just need to make sure to fill them better next time. How are you liking your car these days Brandon? Im gettin my geared up hopefully soon. Ive got a few prosecs and sp2's on my radar I would love to derail..haha

Brandon Powell 03-27-2006 08:14 PM

So far so good. The car is stable and real fast at the apex of a corner. I have an indoor race in two weeks at Alabama, IWC Classic race, and hope to have a good indoor set up to pass along.

kyracer 03-28-2006 10:51 AM

Runnin,

You better do alot more homework if you are thinking about passing my Pro Spec! :sneaky:

Better yet I will give you a really good lesson on the track this year. :D

better 03-28-2006 05:45 PM

If a prospec's gas tank was any taller you would need to cut the body and the spur gear is way too big a 46 not a 44 like the cl1.

Ok I'm just playing the prospec is a dam good car too!

Brandon Powell 04-02-2006 05:23 PM

Here's the final buggy line up at Silver State in Vegas this afternoon.


Paul Coleman won the B Main, Cavalieri, Maifield and JR Mitch have bumped to the Amain

Starting line up - Amain (provisional for bottom 4)
1. Scott Hughes - Mugen/OS
2. Atsushi Hara - Hot Bodies/OS
3. Mark Pavidis - Kyosho/OS
4. Taylor James - Jammin/OS
5. Marty Korn - GS/Collari
6. Greg Degani - HoBao/Picco
7. Richi Gomez - Sidorf/Novarossi
8. Adam Drake - Jammin/Sirio
9. Jeremy Kortz - HoBao/Collari
10. Jared Tebo - O'Donnell/O'Donnell
11. Chad Bradley - Jammin/OS
12. Paul Coleman - HoBao
13. Ryan Cavalieri - Kyosho/Orion
14. Ryan Maifield - TTR/LRP
15. JR Mitch - TTR



Cavalieri and Maifield have both bumped up to the B Main from the I and G mains respectfully.

associatedguy 04-02-2006 05:27 PM

What happened to RC and Mayfield?


All times are GMT -7. It is currently 08:29 PM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.