C4 Layshaft Slip
#1
C4 Layshaft Slip
I've been running the C4 for about a year and the last few months the mid layshaft bearings has started to slip. I run the layshaft oneway completely loose and the standard diff up front. I used the setscrew as recomended on the Corallyusa website and it worked for a while but the bearings is still slipping, Is there a way to completely lock up the layshaft? so I can just put a front one-way in it.
Thanks.
Thanks.
#2
to lock up the oneway on the layshaft, we use to do the following:
1. file a flat on the layshaft
2. tap a grub screw through the oneway down on to the flat created on the layshaft.
this would then make for a solid layshaft setup.
1. file a flat on the layshaft
2. tap a grub screw through the oneway down on to the flat created on the layshaft.
this would then make for a solid layshaft setup.
#3
Ahhh, that's a great idea. Thanks black-knight.
#4
fatdoggy,
Check out the Corally USA site under the Tech Info section for this tip as well as some others for the C4.1
Check out the Corally USA site under the Tech Info section for this tip as well as some others for the C4.1
#5
JANTLE - Thanks.