need advise!
09-21-2012, 08:43 AM
#16
ok, heres the deal, i tradded a novarossi engine just broke in with one race day on it. engine ran excellent all day with no problems at all, actually had about 10 guys asking me what engine i was running because it ran so well, after the race i decided to sell before winter hits to get into electric offroad 1/8 scale because we have no indoor nitro around here. i tradded for a thunder power 4s lipo. i got the lipo and looked good, the other guy sent me email a couple days after and said the engine was junk and took pics of the internals and was dirty and looked like crap!???? this engine ran 1000% awsome the last time i ran it on sept 9th. he wants me to send his lipo back and he will send engine back. he tore the hole engine apart and ripped off front bearing seal. not sure why!! i dont feel i am in the wrong here, this engine was about as good as a new one. plus i have atleast 60 guys that where there that day that saw this engine take 2nd in A-MAIN. the guy is super nice and feel bad because thats the kinda guy i am! but after tearing it apart and ripping off the front bearing seal im not to sure i want it back after who knows what he did to it. i have sold other engines on here and got great feedback. i dont sell or trade junk!!!!!! if its junk it goes in garbage! what to do?
i will not give user name, the guy was super nice through the hole deal!!!!
i will not give user name, the guy was super nice through the hole deal!!!!
http://www.rctech.net/forum/r-c-item...volt-pack.html
this one right
Thanks you have the shipping info.
mike daniels
engine and plugs where shipped today. i got lipo, looks great, thanks, Mike
09-21-2012, 08:51 AM
#17
Man really.
I sent you real fax.
Anyone that knows me know i'm not a bad person.
ask anyone old timer. from 1989---2000's
JAMES DIBBLE AKA "DIBBS"
I was going to keep say cool and eat IT!! lesson learn. LOl
but you going to blast me. COOL!
Let get out all out.
If that is the case you would be welling to send back my cells If they're bad. Lol OK man we will play it your way. Than and good luck
mike daniels <...> wrote:
i have charged the lipo 3 times and 3rd time it puffed up and snapped case seal, so not sure if you want lipo back
On Thu, Sep 20, 2012 at 4:47 PM, mike daniels <...> wrote:
it was not like that when i sent it. i dont sell or trade junk!
On Thu, Sep 20, 2012 at 4:43 PM, James D <...> wrote:
Really how can I miss up the front seal when it came to me like that. I was like wtf. Then I said let me look at the inside. So you telling me motor spray got into the piston and inside was black with the same stuff on the outside of the motor. If that is the case then there is something wrong. Man I was fair with yon on the cells sending you real reading of the pack and all. Plus you said 4 plugs in a Pack and I only got 3. So really.
All I ask is to send my stuff back and I send yours back. Your motor came to me just like I photo it. There is no way I can rip the inside of the front bearing seal like that.
mike daniels <...> wrote:
i am pondering on it, cant figure out why you ripped the front seal off bearing. engine just needs to be cleaned up and would be perfect! it ran excellent the last time i ran it (sept 9th) if it was no good i sure would have not sent it
On Thu, Sep 20, 2012 at 4:26 PM, James D <...> wrote:
Sir are we going to fix this?
mike daniels <...> wrote:
the engine ran excellent, i even had guys at the track tell me how well it ran
On Wed, Sep 19, 2012 at 8:51 PM, James D <...> wrote:
We just need to send our items back to each other no harm no fail. Cool.. we both go on with our lives
Thank you for your time.. I been rctech and sgrid for many many years rctech 2003 and sgrid 1998--+
So I'm not new to rc..
I was just being fair to you and I was hoping to have the same from an other racer.
mike daniels <...> wrote:
you dont need to post on my ads, i will respond to your emails
On Wed, Sep 19, 2012 at 7:46 PM, mike daniels <...> wrote:
that just looks like motor spray that got into the engine
On Wed, Sep 19, 2012 at 7:41 PM, mike daniels <...> wrote:
why did you pull the front seal off bearing?
On Wed, Sep 19, 2012 at 7:37 PM, mike daniels <...> wrote:
i ran that engine on the september 9th and ran flawless.
On Wed, Sep 19, 2012 at 7:32 PM, James D <...> wrote:
hey man i got the motor. Wow this thing is shoot.. and dirt has got in to it.
I'm going to please ask for my pack back ...
9-13-2012, 12:02 AM #1
alwayswin
Tech Addict
Join Date: Jul 2012
Posts: 533
Trader Rating: 8 (90%+)
Default novarossi N21R (NICE)
TRADDEDi have a novarossi n21r with 1 gallon ran through it, engine runs perfect and is great for buggy. i switched to electric buggy so i no longer need.
asking TRADDED shipped money order only or will trade for.....
mod 1 pinions
4s lipos (5000mah+)
1/8 buggy tires
tools (hexes, standard and metric)
tekin 1/8 buggy motor or ?
can email pics
Last edited by alwayswin; 09-13-2012 at 11:09 AM.
alwayswin is online now Report Post
mike daniels < wrote:
here ya go, looks like wednesday.
On Mon, Sep 17, 2012 at 10:03 PM, James D < wrote:
Thanks you have the shipping info.
mike daniels < wrote:
engine and plugs where shipped today. i got lipo, looks great, thanks, Mike
On Mon, Sep 17, 2012 at 6:45 AM, James D < wrote:
Could always use plugs Turbo or standard
mike daniels < wrote:
ok, sorry about that. if there is anything i can add let me know before tomorrow morning, thanks, Mike
On Sun, Sep 16, 2012 at 5:03 PM, James D <> wrote:
Its cool sir
when I storage them. USING MY POWERLAB 6 CHARGER. Anyone that knows about this charger knows its a damn good charger.
Full charged
Packing and Shipped
REALLY GUY!!!
I would not do trade or buy from this guy.
LOOK AT MY FEEDBACK.
SGRID
HERE
LOOK ME UP MAN!!!
IT'S ALL GOOD. LOL
SMILE YOU ARE ON CAMERA
I sent you real fax.
Anyone that knows me know i'm not a bad person.
ask anyone old timer. from 1989---2000's
JAMES DIBBLE AKA "DIBBS"
I was going to keep say cool and eat IT!! lesson learn. LOl
but you going to blast me. COOL!
Let get out all out.
If that is the case you would be welling to send back my cells If they're bad. Lol OK man we will play it your way. Than and good luck
mike daniels <...> wrote:
i have charged the lipo 3 times and 3rd time it puffed up and snapped case seal, so not sure if you want lipo back
On Thu, Sep 20, 2012 at 4:47 PM, mike daniels <...> wrote:
it was not like that when i sent it. i dont sell or trade junk!
On Thu, Sep 20, 2012 at 4:43 PM, James D <...> wrote:
Really how can I miss up the front seal when it came to me like that. I was like wtf. Then I said let me look at the inside. So you telling me motor spray got into the piston and inside was black with the same stuff on the outside of the motor. If that is the case then there is something wrong. Man I was fair with yon on the cells sending you real reading of the pack and all. Plus you said 4 plugs in a Pack and I only got 3. So really.
All I ask is to send my stuff back and I send yours back. Your motor came to me just like I photo it. There is no way I can rip the inside of the front bearing seal like that.
mike daniels <...> wrote:
i am pondering on it, cant figure out why you ripped the front seal off bearing. engine just needs to be cleaned up and would be perfect! it ran excellent the last time i ran it (sept 9th) if it was no good i sure would have not sent it
On Thu, Sep 20, 2012 at 4:26 PM, James D <...> wrote:
Sir are we going to fix this?
mike daniels <...> wrote:
the engine ran excellent, i even had guys at the track tell me how well it ran
On Wed, Sep 19, 2012 at 8:51 PM, James D <...> wrote:
We just need to send our items back to each other no harm no fail. Cool.. we both go on with our lives
Thank you for your time.. I been rctech and sgrid for many many years rctech 2003 and sgrid 1998--+
So I'm not new to rc..
I was just being fair to you and I was hoping to have the same from an other racer.
mike daniels <...> wrote:
you dont need to post on my ads, i will respond to your emails
On Wed, Sep 19, 2012 at 7:46 PM, mike daniels <...> wrote:
that just looks like motor spray that got into the engine
On Wed, Sep 19, 2012 at 7:41 PM, mike daniels <...> wrote:
why did you pull the front seal off bearing?
On Wed, Sep 19, 2012 at 7:37 PM, mike daniels <...> wrote:
i ran that engine on the september 9th and ran flawless.
On Wed, Sep 19, 2012 at 7:32 PM, James D <...> wrote:
hey man i got the motor. Wow this thing is shoot.. and dirt has got in to it.
I'm going to please ask for my pack back ...
9-13-2012, 12:02 AM #1
alwayswin
Tech Addict
Join Date: Jul 2012
Posts: 533
Trader Rating: 8 (90%+)
Default novarossi N21R (NICE)
TRADDEDi have a novarossi n21r with 1 gallon ran through it, engine runs perfect and is great for buggy. i switched to electric buggy so i no longer need.
asking TRADDED shipped money order only or will trade for.....
mod 1 pinions
4s lipos (5000mah+)
1/8 buggy tires
tools (hexes, standard and metric)
tekin 1/8 buggy motor or ?
can email pics
Last edited by alwayswin; 09-13-2012 at 11:09 AM.
alwayswin is online now Report Post
mike daniels < wrote:
here ya go, looks like wednesday.
On Mon, Sep 17, 2012 at 10:03 PM, James D < wrote:
Thanks you have the shipping info.
mike daniels < wrote:
engine and plugs where shipped today. i got lipo, looks great, thanks, Mike
On Mon, Sep 17, 2012 at 6:45 AM, James D < wrote:
Could always use plugs Turbo or standard
mike daniels < wrote:
ok, sorry about that. if there is anything i can add let me know before tomorrow morning, thanks, Mike
On Sun, Sep 16, 2012 at 5:03 PM, James D <> wrote:
Its cool sir
when I storage them. USING MY POWERLAB 6 CHARGER. Anyone that knows about this charger knows its a damn good charger.
Full charged
Packing and Shipped
REALLY GUY!!!
I would not do trade or buy from this guy.
LOOK AT MY FEEDBACK.
SGRID
HERE
LOOK ME UP MAN!!!
IT'S ALL GOOD. LOL
SMILE YOU ARE ON CAMERA
Last edited by Motorman007; 09-21-2012 at 09:09 AM.
09-21-2012, 09:03 AM
#18
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
IIRC some front bearings only come with a seal on one side?..
Anyone who buys a used motor should take the head and back plate off, even if pics are provided by the seller. Just to verify the condition and pics.
Anyone who buys a used motor should take the head and back plate off, even if pics are provided by the seller. Just to verify the condition and pics.
09-21-2012, 09:06 AM
#19
WOW i guess i did not read this .... lolhttp://www.rctech.net/forum/11034399-post11.html
07-30-2012, 04:00 PM #11
alwayswin
Tech Addict
Join Date: Jul 2012
Posts: 580
Trader Rating: 10 (92%+)
I agree. Never buy or trade for a used engine.....
lesson learned the hard way!
07-30-2012, 04:00 PM #11
alwayswin
Tech Addict
Join Date: Jul 2012
Posts: 580
Trader Rating: 10 (92%+)
I agree. Never buy or trade for a used engine.....
lesson learned the hard way!
09-21-2012, 09:10 AM
#21
IIRC some front bearings only come with a seal on one side?..
Motorman007 are you asking him how he pulled it off (the seal) or was he asking you how you did it??
Anyone who buys a used motor should take the head and back plate off, even if pics are provided by the seller. Just to verify the condition and pics.
Motorman007 are you asking him how he pulled it off (the seal) or was he asking you how you did it??
Anyone who buys a used motor should take the head and back plate off, even if pics are provided by the seller. Just to verify the condition and pics.
[
09-21-2012, 09:18 AM
#22
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
Question is then, we'll need an experienced Rossi owner to verify, do they come with seals only on one side of the bearing. Considering it's "just broke in" I'm guessing it's the original bearing.
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
09-21-2012, 09:25 AM
#23
Question is then, we'll need an experienced Rossi owner to verify, do they come with seals only on one side of the bearing. Considering it's "just broke in" I'm guessing it's the original bearing.
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
racer1812 you have been a champ mod lately mate, good job 8)
09-21-2012, 09:30 AM
#24
Question is then, we'll need an experienced Rossi owner to verify, do they come with seals only on one side of the bearing. Considering it's "just broke in" I'm guessing it's the original bearing.
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
09-21-2012, 09:46 AM
#25
Question is then, we'll need an experienced Rossi owner to verify, do they come with seals only on one side of the bearing. Considering it's "just broke in" I'm guessing it's the original bearing.
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
If they come that way then his comment questioning the seal means he never opened the motor himself (alwayswin) to verify what he was selling/trading...bad idea
Lipo puffs after the 3rd cycle...umm that's on you alwayswin
IMO
Tech Addict
Join Date: Jul 2012
Posts: 580
Trader Rating: 10 (92%+)
trader forum
that motor did not look that way when it was sent, im done with you..
Really I got it on wed. and rusted it out in 1 hour of opening it up. then sent you pic's of it.
hahahaha
OK
You need to move on and Never sell a thing on here man.
As soon as you do I will point them to this forum and let them Choose if they will pay or trade with you again.
TAKE CARE MIKE
LIKE IS SAID WE PLAY IT YOUR WAY.
09-21-2012, 09:47 AM
#26
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
EDIT...asking to see pics of the front bearing, on the inside, might be asking a little much. Not sure it's a good idea to have some people taking a motor that far apart. I would want pics of the back plate and head off though.
not directed at anyone, just saying.
This deal's gonna be tough for you guys to work out now that the lipo is puffed
not directed at anyone, just saying.
This deal's gonna be tough for you guys to work out now that the lipo is puffed
09-21-2012, 09:52 AM
#27
EDIT...asking to see pics of the front bearing, on the inside, might be asking a little much. Not sure it's a good idea to have some people taking a motor that far apart. I would want pics of the back plate and head off though.
not directed at anyone, just saying.
This deal's gonna be tough for you guys to work out now that the lipo is puffed
not directed at anyone, just saying.
This deal's gonna be tough for you guys to work out now that the lipo is puffed
I'm done.. sir. But I will be sure he want get other Person this way.
He Picked this route. I will just want to point out facts.
Last edited by Motorman007; 09-21-2012 at 12:54 PM.
09-21-2012, 10:19 AM
#28
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
alwayswin
Tech Addict
Join Date: Jul 2012
Posts: 580
Trader Rating: 10 (92%+)
trader forum
that motor did not look that way when it was sent, im done with you..
Really I got it on wed. and rusted it out in 1 hour of opening it up. then sent you pic's of it.
hahahaha
OK
You need to move on and Never sell a thing on here man.
As soon as you do I will point them to this forum and let them Choose if they will pay or trade with you again.
TAKE CARE MIKE
LIKE IS SAID WE PLAY IT YOUR WAY.
Tech Addict
Join Date: Jul 2012
Posts: 580
Trader Rating: 10 (92%+)
trader forum
that motor did not look that way when it was sent, im done with you..
Really I got it on wed. and rusted it out in 1 hour of opening it up. then sent you pic's of it.
hahahaha
OK
You need to move on and Never sell a thing on here man.
As soon as you do I will point them to this forum and let them Choose if they will pay or trade with you again.
TAKE CARE MIKE
LIKE IS SAID WE PLAY IT YOUR WAY.
I'm not trying to beat you up but after the last situation I would think you would have taken any and all steps to cover your butt..?
09-21-2012, 10:35 AM
#29
Guess what MOD.. It was up now it's gone lol
I should of asked for more photo.. CAN NOT TRUST EVERYONE. That's why I put
http://www.rctech.net/forum/offroad-...ed-motors.html
09-21-2012, 11:25 AM
#30
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,482
Trader Rating: 31 (100%+)
My advice is to respectfully defend yourself, detailed pics would be a start.
Your newly edited post and past situation are plenty for me to give you a vacation BUT I'm going to give you a chance to defend your statement.
If that's not the condition the motor was in then you need to prove it. If you can't you're likely to be looking at another negative feedback that won't be removed.
Your newly edited post and past situation are plenty for me to give you a vacation BUT I'm going to give you a chance to defend your statement.
If that's not the condition the motor was in then you need to prove it. If you can't you're likely to be looking at another negative feedback that won't be removed.