Carpet Racing in Southern Illinois!!!
#2988
yep, should be a few of us there starting around 3:30ish
#2990
#2991
The next two rounds of the UF1 series will land in Carbondale, Il on Oct 25th & 26th.
Location: 500 Oakland St. Carbondale, Il (old National Guard Armory).
Doors open at 9am both days. We will try to finish by 6pm...
Start time: TBD (probably 12pm - 1pm)
Classes: F1, USGT, 1/12 17.5 (You can only run 2 classes, not all 3)
Format: F1 will be standard UF1 format, USGT 6min, 1/12 8min.
Costs: $20 first class, $5 for the second class.
We have the new AMB system so older MRT PTs don't work.
We have new, last season, ozite. 48'x90ish' with plenty of pit space.
Best to bring your own tables and chairs, though we do have a few extras setting around.
Great local F1 following, so it should be a good time. If anyone is looking for more information please call/txt Skip Starkey at (618) 559-8615 or Bill Eisenhard at (618) 534-9294, or post here...
Location: 500 Oakland St. Carbondale, Il (old National Guard Armory).
Doors open at 9am both days. We will try to finish by 6pm...
Start time: TBD (probably 12pm - 1pm)
Classes: F1, USGT, 1/12 17.5 (You can only run 2 classes, not all 3)
Format: F1 will be standard UF1 format, USGT 6min, 1/12 8min.
Costs: $20 first class, $5 for the second class.
We have the new AMB system so older MRT PTs don't work.
We have new, last season, ozite. 48'x90ish' with plenty of pit space.
Best to bring your own tables and chairs, though we do have a few extras setting around.
Great local F1 following, so it should be a good time. If anyone is looking for more information please call/txt Skip Starkey at (618) 559-8615 or Bill Eisenhard at (618) 534-9294, or post here...
#2992
Rumor has it the Cox sisters will be making an appearance this week!!!!
#2994
#2996
#2998
#3000
Show up Wednesday night and bring your original servo hardware, i.e. the red posts, graphite plates, red tie rod balls and screws.... and I'll give ya the setup straight out of my car. Just have your tie rods in place and ready to pop onto the servo saver... I'll unbolt and you can bolt right in. Nothing wrong with it but I was getting ready to change the servo anyway.