Bumps and Jumps 2010 - 2011 season
#1667
hey guys, I have a stupid question... I am having some gearing problems with my slash. I put a MMP and a novak ballistic 17.5 in it. My spur is a 86T and I bumped my pinion up to a 24T last sunday. I was still sluggish down the straight and could only make certain jumps only on full throttle. What mph should I shoot for?
I see that traxxas has up to at least a 31T pinion, would that fit? Not that I want to cook my motor but I would at least like to know my limit.
Thanks in advance!!
I see that traxxas has up to at least a 31T pinion, would that fit? Not that I want to cook my motor but I would at least like to know my limit.
Thanks in advance!!
#1668
hey guys, I have a stupid question... I am having some gearing problems with my slash. I put a MMP and a novak ballistic 17.5 in it. My spur is a 86T and I bumped my pinion up to a 24T last sunday. I was still sluggish down the straight and could only make certain jumps only on full throttle. What mph should I shoot for?
I see that traxxas has up to at least a 31T pinion, would that fit? Not that I want to cook my motor but I would at least like to know my limit.
Thanks in advance!!
I see that traxxas has up to at least a 31T pinion, would that fit? Not that I want to cook my motor but I would at least like to know my limit.
Thanks in advance!!
That was fun running with all you guy's tonight, It was like racing with cuations flags.
#1669
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
hey guys, I have a stupid question... I am having some gearing problems with my slash. I put a MMP and a novak ballistic 17.5 in it. My spur is a 86T and I bumped my pinion up to a 24T last sunday. I was still sluggish down the straight and could only make certain jumps only on full throttle. What mph should I shoot for?
I see that traxxas has up to at least a 31T pinion, would that fit? Not that I want to cook my motor but I would at least like to know my limit.
Thanks in advance!!
I see that traxxas has up to at least a 31T pinion, would that fit? Not that I want to cook my motor but I would at least like to know my limit.
Thanks in advance!!
#1670
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
You need to talk to Brian, tonight at practice we both were nailing the triple triple with sc trucks MMP and 17.5 motors until we both dialed out bottom end grunt to make it... He was running a Slash too.
That was fun running with all you guy's tonight, It was like racing with cuations flags.
That was fun running with all you guy's tonight, It was like racing with cuations flags.
#1671
Ok thanks! I think you helped me last sunday as well. I do also have castle link if it makes it any easier.
#1673
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
I will have my laptop with all that stuff so no worries. Just need your truck few a minute or two to get it tuned in. Like I said gearing for you will be 22/83 for the setup I will put on your MMP. You should have a good combo of low end and high when I'm done. Just sit back and hold on.
#1674
I will have my laptop with all that stuff so no worries. Just need your truck few a minute or two to get it tuned in. Like I said gearing for you will be 22/83 for the setup I will put on your MMP. You should have a good combo of low end and high when I'm done. Just sit back and hold on.
Would adjusting the boost help in this matter as well?
since the spur is 48 pitch..do I need the pinion to be 48 pitch as well? Sorry I've only ran the slash with the stock gearing and motor, so this is new territory for me.
#1675
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
I just did that gearing on scriptasylum.com and 22/83 was just under 19 mph. With my 86/24 is says just under 20 mph. I guess I'm just confused
Would adjusting the boost help in this matter as well?
since the spur is 48 pitch..do I need the pinion to be 48 pitch as well? Sorry I've only ran the slash with the stock gearing and motor, so this is new territory for me.
Would adjusting the boost help in this matter as well?
since the spur is 48 pitch..do I need the pinion to be 48 pitch as well? Sorry I've only ran the slash with the stock gearing and motor, so this is new territory for me.
#1677
Tech Champion
iTrader: (44)
I also have some stuff for sale myself.I have two hpi blitz.will sell both for cheap.also have a jammin x2 buggy.will also sell that for cheap.
A losi xxx4 graphite plus.
A losi xxx cr truck
A losi xxx bk1 buggy
All these cars are the ones I'm running currently.and would like to not go home with them this Sunday.I have a decent amount of parts for all the cars.and will give somebody good deals on them.
P.m. me for any info on them.
Thx,
Matt
A losi xxx4 graphite plus.
A losi xxx cr truck
A losi xxx bk1 buggy
All these cars are the ones I'm running currently.and would like to not go home with them this Sunday.I have a decent amount of parts for all the cars.and will give somebody good deals on them.
P.m. me for any info on them.
Thx,
Matt