Thunder Quarter24 ENDURO
06-06-2012, 09:44 PM
#16
I want to thank Novak for sponsoring this event
Updated Teams
Team Box Stock-Protoform J71
Battman
Donald TQ
Eric G
Team Yellow-HPI-68 Camaro
Joe
Bubba
Twin
Team Noobie-HPI-70 Challenger
Will
Freedy
Scott
Team Thunder-HPI-68 Camaro
Robert
Chuck
Brad
Team Road Block-Protoform-J71
Tommy
Scott
Eddie L
Team Hobby Lobby-HPI-68 Camaro
Hayden
Chris
????????
Team Hotshots-HPI-70 Cuda
Brad
Peter
??????
Team One Lug-???????
James
Brent
??????
Team A-Team-Protoform J71
Josh
Mack
Will(East TN)
Want to race and looking for teammates
Mark*
Aaron
Aaron2u*
Justin(West TN)
also...I have one free body for Team Yellow,Box Stock,Hotshots, and Noobie...
Time is ticking, lets get the teams organized and ready...this is going to be a really fun and exciting day of US VTA action
Updated Teams
Team Box Stock-Protoform J71
Battman
Donald TQ
Eric G
Team Yellow-HPI-68 Camaro
Joe
Bubba
Twin
Team Noobie-HPI-70 Challenger
Will
Freedy
Scott
Team Thunder-HPI-68 Camaro
Robert
Chuck
Brad
Team Road Block-Protoform-J71
Tommy
Scott
Eddie L
Team Hobby Lobby-HPI-68 Camaro
Hayden
Chris
????????
Team Hotshots-HPI-70 Cuda
Brad
Peter
??????
Team One Lug-???????
James
Brent
??????
Team A-Team-Protoform J71
Josh
Mack
Will(East TN)
Want to race and looking for teammates
Mark*
Aaron
Aaron2u*
Justin(West TN)
also...I have one free body for Team Yellow,Box Stock,Hotshots, and Noobie...
Time is ticking, lets get the teams organized and ready...this is going to be a really fun and exciting day of US VTA action
Last edited by DARKSIDE; 06-07-2012 at 05:08 PM.
06-11-2012, 04:15 PM
#21
update
I would like to thank Boca, I recieved the package for the event today.
We are still looking for some Teams to check in....we are less than 2 weeks before we lay down 1500 laps at the Thunder Dome...
Lets get it together and drop some laps....
I also would like to see some pics of the paint jobs, Ive heard some are really good...
Hope everyone gets to come and enjoy a great event and raceday
Im seeing alot of new and returning US VTA racers, and I thank you as well, the support is awesome..
Dont forget June 24th at Thunder RC Raceway Nashville,TN..615-851-1876
We are still looking for some Teams to check in....we are less than 2 weeks before we lay down 1500 laps at the Thunder Dome...
Lets get it together and drop some laps....
I also would like to see some pics of the paint jobs, Ive heard some are really good...
Hope everyone gets to come and enjoy a great event and raceday
Im seeing alot of new and returning US VTA racers, and I thank you as well, the support is awesome..
Dont forget June 24th at Thunder RC Raceway Nashville,TN..615-851-1876
06-15-2012, 08:19 PM
#24
Well I am too excited about this Enduro event. I wish it would hurry up and get here 
I think what has me so pumped up about it is I just received my secondary tc6.1 in the mail and was going through it. Tinkering on these things gets me in the mood to race. I am going to try and make it up there potentially Friday evening, but definitely by Saturday to get some practice right before the race on Sunday. Will the track for sure be open during those times?
I think what has me so pumped up about it is I just received my secondary tc6.1 in the mail and was going through it. Tinkering on these things gets me in the mood to race. I am going to try and make it up there potentially Friday evening, but definitely by Saturday to get some practice right before the race on Sunday. Will the track for sure be open during those times?
06-16-2012, 03:10 PM
#26
I would like to Thank Matt and the Hobby Lobby Team and Hobbyshop for the very nice, and I do say nice donation and sponsorship.
My hats off to you all, thanks again
http://www.hobby-lobby.com/
My hats off to you all, thanks again
http://www.hobby-lobby.com/
06-16-2012, 06:42 PM
#27
The first thing that anybody should know about U.S. Vintage Trans Am is where to find the rules.
Click here to see the official U.S. VTA Rules web page. It should look similar to what you see below.
-------------------------------------------------------------------------------------------------------------------------
NEW RULES EFFECTIVE SEPTEMBER 28, 2011.
Rules updated 4.4.2012. All rules subject to change and expansion should need arise.
It is highly suggested that all indoor carpet tracks use these rules exactly as they are written with no deviations. Please try to keep it consistent and fair for everyone who may attend your track from around the country.
Trans Am Class Rules and Specifications
--------------------------------------------------------------------------------------------------------------
Body Specifications:
Late '60s to early '70s American pony car Vintage Trans-Am bodies only.
Note: Any 2-seat sports car (like the '67 Corvette Stingray) or any non-American built car (like the DeTomaso Pantera) does not fall under the American pony car category.
Bolink part numbers:
BL2262 '68 Chevrolet Camaro
Also known as RJ Speed Part # BOL2262
BL2263 '65 Ford Mustang
Also known as RJ Speed Part # BOL2263
HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
7494 - 1968 Chevrolet Camaro
17531 - 1969 CHEVROLET CAMARO Z28
17546 - 1970 Ford Mustang Boss 302 (scale wing ok)*
105106 - 1970 DODGE CHALLENGER BODY
*Note* For the (3) HPI Mustangs which are not provided with a spoiler: (i.e. 17508, 17519 and 104926)
A lexan spoiler of 16mm total height from trunk deck, and overall chord of 20mm is allowable. All other bodies must use the spoiler included with that specific body set. Built in spoilers may not be enhanced.
* 17508 - 1965 Ford Shelby GT-350
* 17519 - 1966 Ford Mustang GT
* 104926 - 1966 FORD MUSTANG GT COUPE BODY
Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda
Pegasus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang
Protoform part numbers:
#1526 - J71
McAllister Racing part numbers:
#286- 1969 Mustang body
Wings or Spoilers: Body provided deck lid spoilers allowed (not wings). No additional skirts or raised/extended wings or air control surfaces allowed. Body must be trimmed at body trim lines. Full rear bumper required. It is highly preferred that bodies are detailed in race type livery in period-correct paint schemes. Fluorescent colors, wild graphics, chromes and non-period correct paint schemes are frowned upon. All cars must have a number on the hood, both doors and trunk lid. Wheel covers of any type are NOT allowed.
Driver Figures: All cars must include a driver figure consisting of at least a head and shoulders. Here are some examples of driver figure part numbers (ANY suitable 1/10 driver figure is legal - these are readily available examples)
HPI
#104815 INNER BODY SET FOR DT-1 TRUCK BODY
Associated
6180 Driver, unpainted, 1:10
McAllister
#423 Stock Interior and Driver
#419 SPRINT CAR DRIVER
Tire & Wheel Specifications:
The only tires allowed are HPI tire part #4793 "front" and #4797 "rear", using stock tire inserts provided with tire and any HPI Vintage wheels designed to fit these tires. All other tires and/or part numbers are illegal. Wheels and tires designated as "front" must be used as front tires/wheels, "rear" wheels/tires must used as rears. Five or Eight spoke wheels available in various colors. 0mm offset front wheels and 6mm offset rear wheels are intended for 26mm width fronts and 31mm width rear tires. 8-spoke Vintage wheels from #3805 through #3814, 5-spoke Vintage wheels from #3815 through #3822 and Vintage stock car wheels from #3854 through #3860, Vintage Wheel CC Type #33472 and #33473, Vintage Wheel DTP Type #33474 and #33475 are all legal wheels.
Grinding of tire tread is NOT permitted. Sanding of mold seam to remove seam is allowed. HPI Vintage Slicks and HPI Vintage Performance Tires are not allowed. Tire traction compounds are at the discretion of the track. No other altering, changing or softening of the tire is allowed. No "double stuffing" of foam inserts allowed—only single stock vintage tire inserts are allowed.
Chassis Specification:
Four Wheel Drive touring car chassis only. Any era or brand 4wd chassis is allowed.
Gear Ratios: Note: There is no gear ratio limitation in VTA. If you need a recommendation, a 4.0 FDR is a good place to start. An Excel spreadsheet gear ratio and final drive ratio calculator for most touring car chassis is available here.
Motor Specifications:
Only two types of 25.5 brushless motors (powered by 2-cell LiPo battery) are allowed: Novak SS25.5 Pro brushless motor (pn:3425V) or Ballistic 25.5 (pn:3625V- stator only pn:S6625) ONLY combined with any hard-cased 2C 7.4v LiPo pack up to and including 5000 mAh capacity. Novak motors are the ONLY motor allowed at this time. All house track rules regarding LiPo usage apply. Only physical motor timing advance is allowed, however Ballistic motors must not be advanced beyond the last line of the timing range sticker. 12.3 mm rotor diameter only (no "tuning" rotors are allowed, only stock Novak rotors allowed). Using ceramic bearings in the motor makes you a dork. No modifications or optional parts allowed on motor can, endbell, stator, or rotor. No cooling holes or other changes allowed to motor.
Approved ESCs:
NOVAK-
Club Brushless ESC (#1852)
EDGE 2S Brushless ESC (#1850, 1851)
Mongoose Micro Brushless/Brush ESC (#1718)
GTB 2 Racing w/X-Drive (#1749)
GTB 2 Racing w/X-Drive- Low Profile (#1748)
GTB 2 Sportsman Racing Brushless ESC (#1708, 1709)
GTB series part numbers: 1710, 1711
Havoc series part numbers: 1732, 1733, 1735
Slyder part number: 1712
XBR (DISCONTINUED) part number:1720
LRP
A.i. Brushless Reverse part numbers: LRP80100, LRP80150
SPEED PASSION
Cirtix Stock Club Race ESC part number: 12280
Reventon Stock Club Race part number: SP000048
Battery Specifications:
Battery must be a 2-cell (7.4V) LiPo hard cased, 5000 mAh limit.
Ride Height Specification:
Minimum ride height is 5mm.
Weight Specification:
Minimum 1550g in race-ready trim.
Race Specification:
- 5 minute qualifiers.
- 8 minute mains.
- Absolutely NO IFMAR-type starts. All heats and mains should be straight-up starts, with random sorts for each heat. Non random sorts should shuffle starting order for each heat.
Optional Main Variations:
- 12-20 car A-mains, depending on car counts.
- Invert qualifying order based on random hat pull (top 6-10 cars).
- "LeMans" type starts where all cars are lined up on an angle to the racing line in order.
- Run track in reverse rotation for mains.
- Rolling starts.
MOST IMPORTANTLY: If it's not in the rules, and does not encompass the spirit of slower, controlled racing with realistic looking cars, consider it illegal. This is called the "Spirit of VTA" Rule. The class is based on slower, equal playing field competition with less traction, minimal aerodynamic aids and mostly older carpet racing technology. The final objective is close, fair, wheel-to-wheel racing for all. All decisions of the race promoter or track owner are final
Click here to see the official U.S. VTA Rules web page. It should look similar to what you see below.
-------------------------------------------------------------------------------------------------------------------------
NEW RULES EFFECTIVE SEPTEMBER 28, 2011.
Rules updated 4.4.2012. All rules subject to change and expansion should need arise.
It is highly suggested that all indoor carpet tracks use these rules exactly as they are written with no deviations. Please try to keep it consistent and fair for everyone who may attend your track from around the country.
Trans Am Class Rules and Specifications
--------------------------------------------------------------------------------------------------------------
Body Specifications:
Late '60s to early '70s American pony car Vintage Trans-Am bodies only.
Note: Any 2-seat sports car (like the '67 Corvette Stingray) or any non-American built car (like the DeTomaso Pantera) does not fall under the American pony car category.
Bolink part numbers:
BL2262 '68 Chevrolet Camaro
Also known as RJ Speed Part # BOL2262
BL2263 '65 Ford Mustang
Also known as RJ Speed Part # BOL2263
HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
7494 - 1968 Chevrolet Camaro
17531 - 1969 CHEVROLET CAMARO Z28
17546 - 1970 Ford Mustang Boss 302 (scale wing ok)*
105106 - 1970 DODGE CHALLENGER BODY
*Note* For the (3) HPI Mustangs which are not provided with a spoiler: (i.e. 17508, 17519 and 104926)
A lexan spoiler of 16mm total height from trunk deck, and overall chord of 20mm is allowable. All other bodies must use the spoiler included with that specific body set. Built in spoilers may not be enhanced.
* 17508 - 1965 Ford Shelby GT-350
* 17519 - 1966 Ford Mustang GT
* 104926 - 1966 FORD MUSTANG GT COUPE BODY
Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda
Pegasus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang
Protoform part numbers:
#1526 - J71
McAllister Racing part numbers:
#286- 1969 Mustang body
Wings or Spoilers: Body provided deck lid spoilers allowed (not wings). No additional skirts or raised/extended wings or air control surfaces allowed. Body must be trimmed at body trim lines. Full rear bumper required. It is highly preferred that bodies are detailed in race type livery in period-correct paint schemes. Fluorescent colors, wild graphics, chromes and non-period correct paint schemes are frowned upon. All cars must have a number on the hood, both doors and trunk lid. Wheel covers of any type are NOT allowed.
Driver Figures: All cars must include a driver figure consisting of at least a head and shoulders. Here are some examples of driver figure part numbers (ANY suitable 1/10 driver figure is legal - these are readily available examples)
HPI
#104815 INNER BODY SET FOR DT-1 TRUCK BODY
Associated
6180 Driver, unpainted, 1:10
McAllister
#423 Stock Interior and Driver
#419 SPRINT CAR DRIVER
Tire & Wheel Specifications:
The only tires allowed are HPI tire part #4793 "front" and #4797 "rear", using stock tire inserts provided with tire and any HPI Vintage wheels designed to fit these tires. All other tires and/or part numbers are illegal. Wheels and tires designated as "front" must be used as front tires/wheels, "rear" wheels/tires must used as rears. Five or Eight spoke wheels available in various colors. 0mm offset front wheels and 6mm offset rear wheels are intended for 26mm width fronts and 31mm width rear tires. 8-spoke Vintage wheels from #3805 through #3814, 5-spoke Vintage wheels from #3815 through #3822 and Vintage stock car wheels from #3854 through #3860, Vintage Wheel CC Type #33472 and #33473, Vintage Wheel DTP Type #33474 and #33475 are all legal wheels.
Grinding of tire tread is NOT permitted. Sanding of mold seam to remove seam is allowed. HPI Vintage Slicks and HPI Vintage Performance Tires are not allowed. Tire traction compounds are at the discretion of the track. No other altering, changing or softening of the tire is allowed. No "double stuffing" of foam inserts allowed—only single stock vintage tire inserts are allowed.
Chassis Specification:
Four Wheel Drive touring car chassis only. Any era or brand 4wd chassis is allowed.
Gear Ratios: Note: There is no gear ratio limitation in VTA. If you need a recommendation, a 4.0 FDR is a good place to start. An Excel spreadsheet gear ratio and final drive ratio calculator for most touring car chassis is available here.
Motor Specifications:
Only two types of 25.5 brushless motors (powered by 2-cell LiPo battery) are allowed: Novak SS25.5 Pro brushless motor (pn:3425V) or Ballistic 25.5 (pn:3625V- stator only pn:S6625) ONLY combined with any hard-cased 2C 7.4v LiPo pack up to and including 5000 mAh capacity. Novak motors are the ONLY motor allowed at this time. All house track rules regarding LiPo usage apply. Only physical motor timing advance is allowed, however Ballistic motors must not be advanced beyond the last line of the timing range sticker. 12.3 mm rotor diameter only (no "tuning" rotors are allowed, only stock Novak rotors allowed). Using ceramic bearings in the motor makes you a dork. No modifications or optional parts allowed on motor can, endbell, stator, or rotor. No cooling holes or other changes allowed to motor.
Approved ESCs:
NOVAK-
Club Brushless ESC (#1852)
EDGE 2S Brushless ESC (#1850, 1851)
Mongoose Micro Brushless/Brush ESC (#1718)
GTB 2 Racing w/X-Drive (#1749)
GTB 2 Racing w/X-Drive- Low Profile (#1748)
GTB 2 Sportsman Racing Brushless ESC (#1708, 1709)
GTB series part numbers: 1710, 1711
Havoc series part numbers: 1732, 1733, 1735
Slyder part number: 1712
XBR (DISCONTINUED) part number:1720
LRP
A.i. Brushless Reverse part numbers: LRP80100, LRP80150
SPEED PASSION
Cirtix Stock Club Race ESC part number: 12280
Reventon Stock Club Race part number: SP000048
Battery Specifications:
Battery must be a 2-cell (7.4V) LiPo hard cased, 5000 mAh limit.
Ride Height Specification:
Minimum ride height is 5mm.
Weight Specification:
Minimum 1550g in race-ready trim.
Race Specification:
- 5 minute qualifiers.
- 8 minute mains.
- Absolutely NO IFMAR-type starts. All heats and mains should be straight-up starts, with random sorts for each heat. Non random sorts should shuffle starting order for each heat.
Optional Main Variations:
- 12-20 car A-mains, depending on car counts.
- Invert qualifying order based on random hat pull (top 6-10 cars).
- "LeMans" type starts where all cars are lined up on an angle to the racing line in order.
- Run track in reverse rotation for mains.
- Rolling starts.
MOST IMPORTANTLY: If it's not in the rules, and does not encompass the spirit of slower, controlled racing with realistic looking cars, consider it illegal. This is called the "Spirit of VTA" Rule. The class is based on slower, equal playing field competition with less traction, minimal aerodynamic aids and mostly older carpet racing technology. The final objective is close, fair, wheel-to-wheel racing for all. All decisions of the race promoter or track owner are final
06-21-2012, 01:30 PM
#28
Team Box Stock-Protoform J71-PAID
Battman
Donald TQ
Eric G
Team Yellow-HPI-68 Camaro-PAID
Joe
Bubba
Twin
Team Noobie-HPI-70 Challenger
Will
Freedy
Chris
Team Thunder-HPI-68 Camaro
Robert
Chuck
Brad
Team Road Block-Protoform-J71
Tommy
Scott
Eddie L
Team Hobby Lobby-HPI-68 Camaro
Hayden
Chris
Christan
Team Hotshots-HPI-70 Boss Mustang
Brad
Peter
Byran
Team One Lug-???????
James
Brent
??????
Team A-Team-Protoform J71
Josh
Mack
Will(East TN)
Want to race and looking for teammates
Mark*
Aaron
Aaron2u*
Justin(West TN)
Evan
Still have teams needing racers and racers needing teams...come on VTA racers...1500 laps 50% payout Trophies prizes...and a ton of FUN
Battman
Donald TQ
Eric G
Team Yellow-HPI-68 Camaro-PAID
Joe
Bubba
Twin
Team Noobie-HPI-70 Challenger
Will
Freedy
Chris
Team Thunder-HPI-68 Camaro
Robert
Chuck
Brad
Team Road Block-Protoform-J71
Tommy
Scott
Eddie L
Team Hobby Lobby-HPI-68 Camaro
Hayden
Chris
Christan
Team Hotshots-HPI-70 Boss Mustang
Brad
Peter
Byran
Team One Lug-???????
James
Brent
??????
Team A-Team-Protoform J71
Josh
Mack
Will(East TN)
Want to race and looking for teammates
Mark*
Aaron
Aaron2u*
Justin(West TN)
Evan
Still have teams needing racers and racers needing teams...come on VTA racers...1500 laps 50% payout Trophies prizes...and a ton of FUN