Tennessee For Sale/Trade Thread
#2207
SC10 4x4 and RX8 1700 kv motor for sale
I have sc10 4x4 roller with the upgrade kit, 1313 servo and reedy saddle pack batteries. $325 shipped to US.
Also I have a lite used RX8 and 1700 kv motor combo for sale. $225 shipped to US.
PM for any questions
Also I have a lite used RX8 and 1700 kv motor combo for sale. $225 shipped to US.
PM for any questions
#2208
Tech Apprentice
#2209
Tech Rookie
im looking for a 28 truggy motor also looking for a jp4 pipe
#2210
#2212
Tech Master
iTrader: (74)
tekno sct410
up for sale is my tekno sct410 with rx8,pro4 hd 4300,hitech servo,3 set of tires,2 batterys,body,and alot of spares.i am wanting $ SOLD shipped or SOLD local pick up.pics are on the main for sale thread under jay13111.if you have any questions you can text me at 865-389-4732.
Last edited by jay13111; 07-14-2013 at 12:31 PM.
#2213
Anyone locally have a brushless 17.5, 21.5 or 25.5 motor with adjustable timing they want to get rid of?????
#2214
Tech Adept
iTrader: (5)
I am getting out of RC and into Mountain Biking so here is the stuff I do not need anymore. Feel free to make an offer on anything or the whole lot together.
LOSI TEN-SCTE 4x4 Roller minus rims/tires
-TLR lightened Flex Tuned chassis
-TLR Tuning kit, Includes:
o Rear Shock Tower, Carbon, 4mm
o Front Shock Tower, Carbon, 4mm
o Rear Hubs, Aluminum
o Shock Tops, Aluminum
o One Piece Shock Standoffs
o Shock Collars, Aluminum
o Adjustable Front Hinge Pin Holder Set
o Adjustable Rear Hinge Pin Holder Set
-TLR Aluminum Servo horn
- STNC Front and Rear chassis brace
- Brand new TLR shock bleeder caps
Spares
- Brand new Spring set -
- Losi Shock Piston pack - new in package
- Losi 40T Spure Gear - new in package
- TLR Diff refill kit(2k,5k,7k) - new in package
$265 shipped OBO
- Brand new Havoc Pro SC ESC $120 OBO
ESC only has one night of racing on it, ran with a fan.
- Novak Ballistic 4.5T brushless motor $50 OBO
- Hobbico CS170 Digital Servo $60 OBO
- Spektrum SR300 Receiver $30 OBO
Tires:
- (4)AKA Rebars in red compound mounted on JConcept Hazards - used for two heats and a main - $50
- (4) ProLine Holeshots in Super Soft mounted on ProLine Wheels - used for one heat - $50
- (2) ProLine Snipers in Super Soft mounted on JConcept Hazards - just mounted, never used. $25
- (2) ProLine Sniper in super soft still in package - $20
LiPo:
*All backs well taken care of and charged under what the c rating calls for*
Gens Ace 5000mAh 40c- $30
Gens Ace 5000mAh 50c(never used) - $50
Intellect 5000 mAh 50c - $40
Text (360) 480-3530 for pics
LOSI TEN-SCTE 4x4 Roller minus rims/tires
-TLR lightened Flex Tuned chassis
-TLR Tuning kit, Includes:
o Rear Shock Tower, Carbon, 4mm
o Front Shock Tower, Carbon, 4mm
o Rear Hubs, Aluminum
o Shock Tops, Aluminum
o One Piece Shock Standoffs
o Shock Collars, Aluminum
o Adjustable Front Hinge Pin Holder Set
o Adjustable Rear Hinge Pin Holder Set
-TLR Aluminum Servo horn
- STNC Front and Rear chassis brace
- Brand new TLR shock bleeder caps
Spares
- Brand new Spring set -
- Losi Shock Piston pack - new in package
- Losi 40T Spure Gear - new in package
- TLR Diff refill kit(2k,5k,7k) - new in package
$265 shipped OBO
- Brand new Havoc Pro SC ESC $120 OBO
ESC only has one night of racing on it, ran with a fan.
- Novak Ballistic 4.5T brushless motor $50 OBO
- Hobbico CS170 Digital Servo $60 OBO
- Spektrum SR300 Receiver $30 OBO
Tires:
- (4)AKA Rebars in red compound mounted on JConcept Hazards - used for two heats and a main - $50
- (4) ProLine Holeshots in Super Soft mounted on ProLine Wheels - used for one heat - $50
- (2) ProLine Snipers in Super Soft mounted on JConcept Hazards - just mounted, never used. $25
- (2) ProLine Sniper in super soft still in package - $20
LiPo:
*All backs well taken care of and charged under what the c rating calls for*
Gens Ace 5000mAh 40c- $30
Gens Ace 5000mAh 50c(never used) - $50
Intellect 5000 mAh 50c - $40
Text (360) 480-3530 for pics
#2215
Tech Fanatic
iTrader: (11)
I have a few goodies for sale REASONABLE offers accepted, no trades at the moment, buyer pays shipping.
GRP .28 nitro engine, feels like it has good compression, i dont know much about nitro stuff though.
also including a grp efra 2053 tuned pipe and header. pipe is super clean, engine head has some light scuffing but nothing deep.
$75(clutch and flywheel are gone)
OFNA 1700mah nimh rx pack
$20
Spektrum SR3300T telemetry reciever, case has one little clip broken off, i will repair before i ship, antenna is perfect, functions perfectly.
$75
Futaba s9351 servo, 99/100 condition
Torque: 4.8V: 153.0 oz-in (11.02 kg-cm)
6.0V: 192.0 oz-in (13.83 kg-cm)
Speed: 4.8V: 0.16 sec/60°
6.0V: 0.13 sec/60°
$75
MKS servo (sold)
GRP .28 nitro engine, feels like it has good compression, i dont know much about nitro stuff though.
also including a grp efra 2053 tuned pipe and header. pipe is super clean, engine head has some light scuffing but nothing deep.
$75(clutch and flywheel are gone)
OFNA 1700mah nimh rx pack
$20
Spektrum SR3300T telemetry reciever, case has one little clip broken off, i will repair before i ship, antenna is perfect, functions perfectly.
$75
Futaba s9351 servo, 99/100 condition
Torque: 4.8V: 153.0 oz-in (11.02 kg-cm)
6.0V: 192.0 oz-in (13.83 kg-cm)
Speed: 4.8V: 0.16 sec/60°
6.0V: 0.13 sec/60°
$75
MKS servo (sold)
#2216
Tech Regular
iTrader: (7)
Mugen MBX6R US Edition
2 gallons on buggy. 1st was break in. Great shape other than needing a front diff case. Sway bar mount is broken. Will come with 1800mah lipo receiver pack and new unopened Avid bearing kit. Also have all aluminum toe blocks and inserts.
Nova P5- 2 easy gallons (1 on break-in) Will come with Werks 2058 pipe with short header for Mugen and the regular header also.
Werks B2 – needs piston/sleeve (has new front bearing)
Savox 1268 and 1267 servos
Ofna 1/8 starter box with power panel with 2x2s lipos
Hot shot glow igniter with charger
No tires/receiver/transponder
Spares lot all Brand New $300+
1 x [MUGM1206] Mugen Graphite Front Shock Tower (Silver) (X6R US)
1 x [MUGM1207] Mugen Graphite Rear Shock Tower (Silver) (X6R US)
1 x [MUGE0149] Mugen Front Lower Suspension Arm
1 x [MUGE0148] Mugen Front Upper Suspension Arm
1 x [MUGE0150] Mugen Rear Lower Suspension Arm
1 x [MUGE0548] Mugen Damper Mount (4)
1 x [MUGE0222] Mugen Front/Rear Drive Shaft (2)
1 x [MUGE0242] Mugen Aluminum F/R Axle Shaft (2)
1 x [MUGE0151] Mugen Front Hub Carrier
1 x [MUGE0159] Mugen Adjusting Nut (4)
1 x [MUGE0142/1] Mugen Aluminum Upper Pillow Ball (2)
1 x [MUGE0160] Mugen Front Lower Pillow Ball (2)
1 x [MUGM1203] Mugen Front Upper Arm Mounts
2 x [MUGE0232] Mugen Bevel Gear
Going to go ahead and split this up. I have a little over $1500 dollars into this and it all has 2 gallons on it except one of the servos. Anything I can find for nitro will be thrown in. Would really like to sell locally. So here is the breakdown. If you want the whole package we can work out a deal.
Roller - $325 w/o spares
$500 with over $300 in spares
Nova P5/werks pipe/2 headers/Werks B2 - $225
1 x Savox 1267 - $70
Bump box with batteries and glow igniter - $50
Only trade would be for ARTR Tekno EB-48 or partial for roller
Click for larger pics
2 gallons on buggy. 1st was break in. Great shape other than needing a front diff case. Sway bar mount is broken. Will come with 1800mah lipo receiver pack and new unopened Avid bearing kit. Also have all aluminum toe blocks and inserts.
Nova P5- 2 easy gallons (1 on break-in) Will come with Werks 2058 pipe with short header for Mugen and the regular header also.
Werks B2 – needs piston/sleeve (has new front bearing)
Savox 1268 and 1267 servos
Ofna 1/8 starter box with power panel with 2x2s lipos
Hot shot glow igniter with charger
No tires/receiver/transponder
Spares lot all Brand New $300+
1 x [MUGM1206] Mugen Graphite Front Shock Tower (Silver) (X6R US)
1 x [MUGM1207] Mugen Graphite Rear Shock Tower (Silver) (X6R US)
1 x [MUGE0149] Mugen Front Lower Suspension Arm
1 x [MUGE0148] Mugen Front Upper Suspension Arm
1 x [MUGE0150] Mugen Rear Lower Suspension Arm
1 x [MUGE0548] Mugen Damper Mount (4)
1 x [MUGE0222] Mugen Front/Rear Drive Shaft (2)
1 x [MUGE0242] Mugen Aluminum F/R Axle Shaft (2)
1 x [MUGE0151] Mugen Front Hub Carrier
1 x [MUGE0159] Mugen Adjusting Nut (4)
1 x [MUGE0142/1] Mugen Aluminum Upper Pillow Ball (2)
1 x [MUGE0160] Mugen Front Lower Pillow Ball (2)
1 x [MUGM1203] Mugen Front Upper Arm Mounts
2 x [MUGE0232] Mugen Bevel Gear
Going to go ahead and split this up. I have a little over $1500 dollars into this and it all has 2 gallons on it except one of the servos. Anything I can find for nitro will be thrown in. Would really like to sell locally. So here is the breakdown. If you want the whole package we can work out a deal.
Roller - $325 w/o spares
$500 with over $300 in spares
Nova P5/werks pipe/2 headers/Werks B2 - $225
1 x Savox 1267 - $70
Bump box with batteries and glow igniter - $50
Only trade would be for ARTR Tekno EB-48 or partial for roller
Click for larger pics
Last edited by rsawyers9; 07-16-2013 at 04:44 PM.
#2217
Tech Master
iTrader: (33)
{{{AE RC8.2e roller for sale}}} REDUCED PRICE
This is a AE RC8.2e roller only for sale. I'm only selling it two ways.
-Roller only with a few spare parts no elecs $205 and $220 shipped. It does come w/ 2 bodies that are not pictured one beat up pretty good and one that only hase 3 races on it.
- Roller w/parts, 1256 savox servo, Tekin RX8, Tekin 1700kv motor, (2) 4s lipo packs(transponder or rx not included)and a few pinions. $390local $415 shipped.
Also have a few sets of good tires that I would let go for $20-$25 set of four.
Please no low ball as I'm not desperate to sell.
Call or text 865/206/988eight
-Roller only with a few spare parts no elecs $205 and $220 shipped. It does come w/ 2 bodies that are not pictured one beat up pretty good and one that only hase 3 races on it.
- Roller w/parts, 1256 savox servo, Tekin RX8, Tekin 1700kv motor, (2) 4s lipo packs(transponder or rx not included)and a few pinions. $390local $415 shipped.
Also have a few sets of good tires that I would let go for $20-$25 set of four.
Please no low ball as I'm not desperate to sell.
Call or text 865/206/988eight
Last edited by Cajvol94; 07-23-2013 at 04:43 PM.
#2219
Tech Regular
iTrader: (7)
Mugen MBX6R US Edition
2 gallons on buggy. 1st was break in. Great shape other than needing a front diff case. Sway bar mount is broken. Will come with 1800mah lipo receiver pack and new unopened Avid bearing kit. Also have all aluminum toe blocks and inserts.
Nova P5- 2 easy gallons (1 on break-in) Will come with Werks 2058 pipe with short header for Mugen and the regular header also.
Werks B2 – needs piston/sleeve (has new front bearing)
Savox 1268 and 1267 servos
Ofna 1/8 starter box with power panel with 2x2s lipos
Hot shot glow igniter with charger
No tires/receiver/transponder
Spares lot all Brand New $300+
1 x [MUGM1206] Mugen Graphite Front Shock Tower (Silver) (X6R US)
1 x [MUGM1207] Mugen Graphite Rear Shock Tower (Silver) (X6R US)
1 x [MUGE0149] Mugen Front Lower Suspension Arm
1 x [MUGE0148] Mugen Front Upper Suspension Arm
1 x [MUGE0150] Mugen Rear Lower Suspension Arm
1 x [MUGE0548] Mugen Damper Mount (4)
1 x [MUGE0222] Mugen Front/Rear Drive Shaft (2)
1 x [MUGE0242] Mugen Aluminum F/R Axle Shaft (2)
1 x [MUGE0151] Mugen Front Hub Carrier
1 x [MUGE0159] Mugen Adjusting Nut (4)
1 x [MUGE0142/1] Mugen Aluminum Upper Pillow Ball (2)
1 x [MUGE0160] Mugen Front Lower Pillow Ball (2)
1 x [MUGM1203] Mugen Front Upper Arm Mounts
2 x [MUGE0232] Mugen Bevel Gear
Going to go ahead and split this up. I have a little over $1500 dollars into this and it all has 2 gallons on it except one of the servos. Anything I can find for nitro will be thrown in. Would really like to sell locally. So here is the breakdown. If you want the whole package we can work out a deal.
Roller - $325 w/o spares
$500 with over $300 in spares
Nova P5/werks pipe/2 headers/Werks B2 - $225
1 x Savox 1267 - $70
Bump box with batteries and glow igniter - $50
Only trade would be for ARTR Tekno EB-48 or partial for roller
Click for larger pics
2 gallons on buggy. 1st was break in. Great shape other than needing a front diff case. Sway bar mount is broken. Will come with 1800mah lipo receiver pack and new unopened Avid bearing kit. Also have all aluminum toe blocks and inserts.
Nova P5- 2 easy gallons (1 on break-in) Will come with Werks 2058 pipe with short header for Mugen and the regular header also.
Werks B2 – needs piston/sleeve (has new front bearing)
Savox 1268 and 1267 servos
Ofna 1/8 starter box with power panel with 2x2s lipos
Hot shot glow igniter with charger
No tires/receiver/transponder
Spares lot all Brand New $300+
1 x [MUGM1206] Mugen Graphite Front Shock Tower (Silver) (X6R US)
1 x [MUGM1207] Mugen Graphite Rear Shock Tower (Silver) (X6R US)
1 x [MUGE0149] Mugen Front Lower Suspension Arm
1 x [MUGE0148] Mugen Front Upper Suspension Arm
1 x [MUGE0150] Mugen Rear Lower Suspension Arm
1 x [MUGE0548] Mugen Damper Mount (4)
1 x [MUGE0222] Mugen Front/Rear Drive Shaft (2)
1 x [MUGE0242] Mugen Aluminum F/R Axle Shaft (2)
1 x [MUGE0151] Mugen Front Hub Carrier
1 x [MUGE0159] Mugen Adjusting Nut (4)
1 x [MUGE0142/1] Mugen Aluminum Upper Pillow Ball (2)
1 x [MUGE0160] Mugen Front Lower Pillow Ball (2)
1 x [MUGM1203] Mugen Front Upper Arm Mounts
2 x [MUGE0232] Mugen Bevel Gear
Going to go ahead and split this up. I have a little over $1500 dollars into this and it all has 2 gallons on it except one of the servos. Anything I can find for nitro will be thrown in. Would really like to sell locally. So here is the breakdown. If you want the whole package we can work out a deal.
Roller - $325 w/o spares
$500 with over $300 in spares
Nova P5/werks pipe/2 headers/Werks B2 - $225
1 x Savox 1267 - $70
Bump box with batteries and glow igniter - $50
Only trade would be for ARTR Tekno EB-48 or partial for roller
Click for larger pics
#2220
Anyone locally have a VTA motor with adjustable timing they may want to part with???