Hyperform Racing
11-07-2005, 06:54 PM
#916
Tim, Paul and i are sooting for that weekend you all have the 2nd series race. This is not a definite thing but it is something were are looking towards. I am looking forward to running on the new carpet and greatly appreciate any setup tips you might have for me on the Hyperform car.
11-07-2005, 10:45 PM
#917
Originally Posted by tpczx6
Carlos
I used assoc 12L4 as on friday the track was not up to bite I could make the Hyperform work on low and high bite but not on the track we had on friday.they said that this is how the track will be set up for the weekend and I had better control thru the 8min with the assoc as I been running one for way to manny years.(don't want to show my age)I just had not had enough time with the Hyperform yet as its my frist 1/12th with tubes and I did not have all the lubes to try but after we had sometime in hobbytown I did find some. (a day late) but that won't happan again. the car is hook up on the carpet come up to Dallas on 12/11/05 as this will be are 2nd series race and we should have good turn out the frist race is the sunday of thanksgiving and most people from out of town might have things to do with there loved ones
I used assoc 12L4 as on friday the track was not up to bite I could make the Hyperform work on low and high bite but not on the track we had on friday.they said that this is how the track will be set up for the weekend and I had better control thru the 8min with the assoc as I been running one for way to manny years.(don't want to show my age)I just had not had enough time with the Hyperform yet as its my frist 1/12th with tubes and I did not have all the lubes to try but after we had sometime in hobbytown I did find some. (a day late) but that won't happan again. the car is hook up on the carpet come up to Dallas on 12/11/05 as this will be are 2nd series race and we should have good turn out the frist race is the sunday of thanksgiving and most people from out of town might have things to do with there loved ones
11-08-2005, 04:07 AM
#918
Tech Fanatic
iTrader: (5)
Hey guy's the car is running great. (well almost) some minor tuning it should be great and my driving has to get better too to take full advantage of this sweet machine. last weekend was a fast flowing tack. this week should be tight but we never now till we get there.
Well the set up i'm using is pretty much the stock set up mention on the website.
I beleive it's
10 degree front blocks
1 degree of camber
-1 of toe
not sure the thickness of the t-bar.
or the front springs.
i'm using a black spring on the mono shock
and can't remember the oil wieht in the shock
i'm using 75 or 80 weight oil in the tube
front pink and grey rears
monster stock (every one in the club runs the same motor as it the club 12 scale motor)
100 spur with a 27 pinon
our track is alway different from week to week.
out carpet is old so it a low bite track.
Also running the battery rear
and running angle servo.
I found out last weekend that my tbar was not tight enough in which was giving me my steering problems. doh!
Looking for a bit more steering and more rear traction and ideas
I got to figure out gearing for this car how to use it to my advantage.
Well the set up i'm using is pretty much the stock set up mention on the website.
I beleive it's
10 degree front blocks
1 degree of camber
-1 of toe
not sure the thickness of the t-bar.
or the front springs.
i'm using a black spring on the mono shock
and can't remember the oil wieht in the shock
i'm using 75 or 80 weight oil in the tube
front pink and grey rears
monster stock (every one in the club runs the same motor as it the club 12 scale motor)
100 spur with a 27 pinon
our track is alway different from week to week.
out carpet is old so it a low bite track.
Also running the battery rear
and running angle servo.
I found out last weekend that my tbar was not tight enough in which was giving me my steering problems. doh!
Looking for a bit more steering and more rear traction and ideas
I got to figure out gearing for this car how to use it to my advantage.
11-08-2005, 05:40 AM
#920
Originally Posted by Hyperform Racing
Tim, running a car other then the Hyperform 12... Shame on you...
11-08-2005, 11:14 AM
#921
Hi,
just ordered 1 of these to run in the UK from guy over here that has them.
any setup info for high grip carpet welcome
just ordered 1 of these to run in the UK from guy over here that has them.
any setup info for high grip carpet welcome
11-08-2005, 11:29 AM
#923
Originally Posted by radio_car_racer
Hi,
just ordered 1 of these to run in the UK from guy over here that has them.
any setup info for high grip carpet welcome
just ordered 1 of these to run in the UK from guy over here that has them.
any setup info for high grip carpet welcome
20 front springs
25,000 diff lube in tubes
11-08-2005, 12:09 PM
#924
Tech Adept
UK setup
Originally Posted by radio_car_racer
Hi,
just ordered 1 of these to run in the UK from guy over here that has them.
any setup info for high grip carpet welcome
just ordered 1 of these to run in the UK from guy over here that has them.
any setup info for high grip carpet welcome
Jason Butterfield
11-08-2005, 12:25 PM
#925
I'm just playing with Tim. He's the newest addition to the Hyperform 12th scale team. It's a newbie hazing thing... 
11-08-2005, 12:38 PM
#926
Originally Posted by Hyperform Racing
I'm just playing with Tim. He's the newest addition to the Hyperform 12th scale team. It's a newbie hazing thing...
He's the newest addition to the Hyperform 12th scale team.
look out masers class the old man coming back in to the mix
11-08-2005, 12:41 PM
#927
Originally Posted by jasonb
Come and see me at Teeside next week, I've been running mine for about a month now.
Jason Butterfield
Jason Butterfield
11-08-2005, 02:12 PM
#929
I have been thinking about getting one of the hyperform 12 scales.I just never have taped in batteries before and wouldnt want them to come loose.Seems to be a pain to tape them in.What do you guys think.Is there anyway to use some kind of battery holding system on it with out drilling.
mike
mike
11-08-2005, 02:55 PM
#930
Originally Posted by whynot
I have been thinking about getting one of the hyperform 12 scales.I just never have taped in batteries before and wouldnt want them to come loose.Seems to be a pain to tape them in.What do you guys think.Is there anyway to use some kind of battery holding system on it with out drilling.
mike
mike
