R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road > Team and Company Discussions

Reply
 
Thread Tools Search this Thread
Old 05-07-2010, 10:56 AM   #76
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by AOD View Post
Got my motor in the mail today. Can't wait to try it out on the 16th. Thanks Nate for the awesome service.
No problem if you need anything give me a call from the track and I will help the best I can!
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-08-2010, 02:13 AM   #77
Tech Adept
 
Revlimit's Avatar
 
Join Date: Oct 2009
Location: Worthleavin, KS
Posts: 125
Trader Rating: 5 (100%+)
Default

I got my 13.5 in the mail today! I couldn't resist putting it in and running up and down the street a couple of times in my buggy based, rubber buggy tire (losi xxxcr) EDM. First thing I noticed is the great low end torque and the smooth powerband, finally the awesome top end speed. When I turned on the turbo on my speed passion gt 2.0 lpf with hobbywing 422stock software, IT RIPPED! I can't wait until tomorrow night to try it out on the track, with and with out the turbo. You will hear from me at the end of its first run Nathan!
Revlimit is offline   Reply With Quote
Old 05-08-2010, 06:17 AM   #78
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Revlimit View Post
I got my 13.5 in the mail today! I couldn't resist putting it in and running up and down the street a couple of times in my buggy based, rubber buggy tire (losi xxxcr) EDM. First thing I noticed is the great low end torque and the smooth powerband, finally the awesome top end speed. When I turned on the turbo on my speed passion gt 2.0 lpf with hobbywing 422stock software, IT RIPPED! I can't wait until tomorrow night to try it out on the track, with and with out the turbo. You will hear from me at the end of its first run Nathan!
That is great to hear...please do let us know how it goes.
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-09-2010, 01:14 AM   #79
Tech Adept
 
Revlimit's Avatar
 
Join Date: Oct 2009
Location: Worthleavin, KS
Posts: 125
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by ElectriMagician View Post
That is great to hear...please do let us know how it goes.
The 13.5 motor did great on the oval! My only hang up was an experimental set up. I had the speed to keep up with 7.5s and 8.5s with no problem. Of course I was boosted with the hobbywing 422stock software in my speed passion 2.o lpf (setting at end of post). After the racing was over I did a little more experimenting with boost settings and found that the boost start rpm was better at 4500rpm than at 6000rpm, and I am sure it would be even better for the track I was on at 3000rpm but my battery died and didn't get to try it. I will definately be getting another motor for my buggy (associated B4) based latemodel!

Running mode= 1
Drag Brake= 15%
LVC= 6.2v
DRRS= 7
Brake= 100%
Reverse= 25%
Initial Brake= Drag Brake
Neutral Range= 6%
Boost Timing= 6/15*
Overheat Proctection= Enabled
Turbo Timing= 5/4*
Boost Start RPM= 6000rpm
Turbo Open Delay= 0.1s
Timing Punch= -1
Pinion/Spur(48p)/Diff Ratio= 27/82/2.43
FDR= 7.38
5 Minute Temp= 125-130*F

I know I could have pushed it harder but the car wasn't handling good enough
Revlimit is offline   Reply With Quote
Old 05-09-2010, 10:33 AM   #80
Tech Master
 
Owen RaCing's Avatar
 
Join Date: Jan 2007
Location: Mountain Valley
Posts: 1,940
Trader Rating: 17 (100%+)
Default

Can we send in new V3 SP's for you to do your magic on? My dad has a new V3 17.5 that I would like tuned up for him just for kicks. If so, what does something like this cost?

Thanks,
__________________
powered by anti-anxieties, sarcasm and chipotle
Owen RaCing is offline   Reply With Quote
Old 05-09-2010, 03:09 PM   #81
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Had to put this on the thread because I have to retire the body.

Larry thanks for the paint job!
Attached Thumbnails
Boss RC Motorsports-ltcr-sack-paints.jpg  
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-09-2010, 04:55 PM   #82
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Kenny L View Post
After a great phone call with Nate. I will be running Boss motors Looking forward to getting some of that rip in my car that you guys down at Jackson had. Going to be doing lots of running from now till Vegas. I will be running the Boss 17.5 at the Sweep challenge next month so better watch out for my Boss powered ride. Thanks again Nate for bringing me on the Team I know this year is going to be a good one for you.
Your motors are done...and let me tell you!

HP won't be a problem!
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-09-2010, 11:00 PM   #83
Tech Adept
 
Revlimit's Avatar
 
Join Date: Oct 2009
Location: Worthleavin, KS
Posts: 125
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by Revlimit View Post
The 13.5 motor did great on the oval! My only hang up was an experimental set up. I had the speed to keep up with 7.5s and 8.5s with no problem. Of course I was boosted with the hobbywing 422stock software in my speed passion 2.o lpf (setting at end of post). After the racing was over I did a little more experimenting with boost settings and found that the boost start rpm was better at 4500rpm than at 6000rpm, and I am sure it would be even better for the track I was on at 3000rpm but my battery died and didn't get to try it. I will definately be getting another motor for my buggy (associated B4) based latemodel!

Running mode= 1
Drag Brake= 15%
LVC= 6.2v
DRRS= 7
Brake= 100%
Reverse= 25%
Initial Brake= Drag Brake
Neutral Range= 6%
Boost Timing= 6/15*
Overheat Proctection= Enabled
Turbo Timing= 5/4*
Boost Start RPM= 6000rpm
Turbo Open Delay= 0.1s
Timing Punch= -1
Pinion/Spur(48p)/Diff Ratio= 27/82/2.43
FDR= 7.38
5 Minute Temp= 125-130*F

I know I could have pushed it harder but the car wasn't handling good enough
I frogot that my motor timing was set in the middle. Not sure exactly, but the sensor plug was centered in the slot, roughly 5* I think.
Revlimit is offline   Reply With Quote
Old 05-11-2010, 06:40 PM   #84
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default Sweep Challange

I will be heading up to the Sweep Challenge in Chaplin, CT this Saturday to watch some mod. racing. It will be nice to see how our 10.5 will do on the 210' foot straight away. I will be going with my brother, Mark Dawson, and hopefully I can get Diatta Collymore to give electric racing a shot again! I think I have a good chance on getting him there since I told him they were racing MOD!

Don't punk out Diatta!
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-12-2010, 07:55 AM   #85
Tech Regular
 
Join Date: Sep 2009
Posts: 268
Default

I just wanted to say thank you to Nathan for sending me a 17.5 BOSS Motor so fast, Iíll be running it at the 2010 N.W.Short course Nationals May 15th, 2010 in my SC-10.
MOTOJOE is offline   Reply With Quote
Old 05-12-2010, 01:08 PM   #86
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by MOTOJOE View Post
I just wanted to say thank you to Nathan for sending me a 17.5 BOSS Motor so fast, Iíll be running it at the 2010 N.W.Short course Nationals May 15th, 2010 in my SC-10.
Your very welcome! Now go out there and show them whose got BOSS!

That was corny!

Good Luck!
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-12-2010, 04:09 PM   #87
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by ElectriMagician View Post
I will be heading up to the Sweep Challenge in Chaplin, CT this Saturday to watch some mod. racing. It will be nice to see how our 10.5 will do on the 210' foot straight away. I will be going with my brother, Mark Dawson, and hopefully I can get Diatta Collymore to give electric racing a shot again! I think I have a good chance on getting him there since I told him they were racing MOD!

Don't punk out Diatta!
It's official Diatta Collymore will be going to the Sweep Challenge with us on Saturday May 15th. Diatta is one of the best guys you can in your pits. He's funny and can make the best out of anything!

Get your sign up in Diatta!
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Old 05-12-2010, 06:50 PM   #88
Tech Elite
 
nitrobeast's Avatar
 
Join Date: Apr 2006
Location: Colonia, NJ
Posts: 2,340
Trader Rating: 41 (100%+)
Default

Quote:
Originally Posted by ElectriMagician View Post
It's official Diatta Collymore will be going to the Sweep Challenge with us on Saturday May 15th. Diatta is one of the best guys you can in your pits. He's funny and can make the best out of anything!

Get your sign up in Diatta!
WOW double header for the young gun..
__________________
Rui Goncalves
Team CRC|Awesomatix USA|TQ Wire|
Jackson curbs, ready for lift off!
nitrobeast is offline   Reply With Quote
Old 05-12-2010, 07:54 PM   #89
Tech Fanatic
 
D-nicest's Avatar
 
Join Date: Sep 2006
Location: NY, New York
Posts: 876
Default

Quote:
Originally Posted by nitrobeast View Post
WOW double header for the young gun..
Should be fun lol. Can't wait to throw down some rubber brushless style. And Nate, you should know by now I never punk out now to prepare for a long weekend Wish us luck
__________________
Diatta Collymore [email protected]([email protected])(www.fordhamhobbies.com) (Wallacemotorsports.net) Fordham Hobbies, Wallace Motorsports, WRC Racing, Hot Race Tyres, Ielasi Tuned Engines, VP Power Master fuel, KO Propo America, Paint By Mikey Mike
D-nicest is offline   Reply With Quote
Old 05-12-2010, 08:40 PM   #90
Tech Regular
 
ElectriMagician's Avatar
 
Join Date: Mar 2010
Posts: 413
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by D-nicest View Post
Should be fun lol. Can't wait to throw down some rubber brushless style. And Nate, you should know by now I never punk out now to prepare for a long weekend Wish us luck
I know I just wanted to get your attention and hope you be good with going up...we'll have a lot of fun!
__________________
Nathan Laskey
ElectriMagician is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fullthrottle Motorsports motorhead Team and Company Discussions 12419 05-07-2016 06:40 PM
Horsham Rc Carpet racing 2009 Jeff Cuffs Racing Forum 3890 09-12-2010 02:01 PM
Looking for bruhless motor sigs R/C Items: Wanted to Buy 10 03-01-2010 08:38 AM
2008 FEMCA GP Off-Road Championships TheTimeKeeper Australian Racing 9 10-17-2008 05:52 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:47 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net