59LikesTeam ORCA USA Discussion Thread
07-05-2021, 07:15 AM
#1112
Trying to update the firmware on my OE1 program card. reason i got a new 2s ORCA BP1001 Blinky Pro but my program card will not link to it. just keeps saying linking.
Any help
Any help
07-07-2021, 12:05 AM
#1113
Originally Posted by anythinggas
Trying to update the firmware on my OE1 program card. reason i got a new 2s ORCA BP1001 Blinky Pro but my program card will not link to it. just keeps saying linking.
Any help
Any help
07-07-2021, 02:12 AM
#1114
Originally Posted by disaster999
You need to update the program card first if you want to program your ESC with the program card. Upload the latest firmware onto an SD card and insert it to the program card. Use a USB cable to provide power to the program card and update it. You should be able to link to the Blinky Pro ESC after that.
07-07-2021, 04:52 AM
#1115
Originally Posted by anythinggas
been trying to do that. saved the lasted update, put the card in and i got hold down, the i get load file, then tells "file not exist" current version on pragrammer is 3.0
07-07-2021, 06:42 AM
#1116
Originally Posted by geeunit1014
Make sure the files are all in the folders with the correct names. Sounds like it’s looking for something not there, the box only knows to look in a folder with a certain name
07-07-2021, 08:11 AM
#1117
Originally Posted by anythinggas
what should the folder be. When I open the Sd card the .bin file is there.not sure what’s it looking for
07-07-2021, 09:40 AM
#1118
Originally Posted by geeunit1014
the firmware files need to be in folder named “Firmware”, this is what the box looks for
07-07-2021, 12:32 PM
#1119
Thanks geeunit1014
for the assistance, got to update the programmer, now time to update the ESC.
for the assistance, got to update the programmer, now time to update the ESC.
07-21-2021, 12:16 PM
#1120
Tech Apprentice
I recently bought an ORCO bl
+inky Pro ESC and a program card. BUT no way to link the ESC to the program card. I am missing the 4 wire cable and don't have the correct connector to make one. Who do I go to for get the missing wire?
+inky Pro ESC and a program card. BUT no way to link the ESC to the program card. I am missing the 4 wire cable and don't have the correct connector to make one. Who do I go to for get the missing wire?
Last edited by mediumquick; 07-21-2021 at 03:48 PM. Reason: spelling
07-21-2021, 09:08 PM
#1121
Originally Posted by mediumquick
I recently bought an ORCO bl
+inky Pro ESC and a program card. BUT no way to link the ESC to the program card. I am missing the 4 wire cable and don't have the correct connector to make one. Who do I go to for get the missing wire?
+inky Pro ESC and a program card. BUT no way to link the ESC to the program card. I am missing the 4 wire cable and don't have the correct connector to make one. Who do I go to for get the missing wire?
07-22-2021, 03:52 AM
#1122
If you have an extra sensor cable, you can cut it so it is 4 pins wide and that will work
07-22-2021, 02:27 PM
#1123
Tech Apprentice
Yeah, that's what I ended up doing. It had the correct pin spacing & ended up working just fine.
Last edited by mediumquick; 07-23-2021 at 09:36 AM. Reason: spelling
07-29-2021, 12:06 PM
#1124
Tech Apprentice
Originally Posted by disaster999
You need to update the program card first if you want to program your ESC with the program card. Upload the latest firmware onto an SD card and insert it to the program card. Use a USB cable to provide power to the program card and update it. You should be able to link to the Blinky Pro ESC after that.
07-29-2021, 12:09 PM
#1125
Tech Apprentice
Originally Posted by disaster999
You need to update the program card first if you want to program your ESC with the program card. Upload the latest firmware onto an SD card and insert it to the program card. Use a USB cable to provide power to the program card and update it. You should be able to link to the Blinky Pro ESC after that.
