TexRacer

iTrader: (70)

RinkRat99-If you know of someone with a temp gun.You want your packs to peak out at 120-130 degree's F.

So if your charging at 5.0 with the integy and it's only 110 then you could try 5.5 and so on.

Goodluck with the new cells and racing.

jsp

I just returned home from the 1/12 and Touring Car Worlds in Orlando. Hideo Kitazawa won the 3rd A main in 1/12 scale using ProMatch batteries. Masami won the first 2 A mains and Hideo broke. But he smoked everyone in the third round including Hara. Remember all the big guys and big teams were there in force and ProMatch won one of the A mains.
Hi Erica!
Desertracer: your amp calculations are a little off. The Promatch Smart Tray has a .75 ohm resistor in series with a diode on each cell. Current at the beginning is about .5 amps. After about 12 hours on the tray, voltage is about .60 per cell. After 24 to 48 hours voltage is about .50 volts per cell. This system removes vertually all the charge in the pack but does not take the voltage down to far. At the Worlds, I would estimate 75% or more racers were using Smart Trays or trays that worked exactly the same. I was there for 7 days and saw a lot.
That's my update.
john

jsp

I forgot to mention, Hideo Kitazawa qualified 3rd in the 1/12 A main.

jaysimpson

iTrader: (9)

JSP: Thanks for that info man, that's great to hear Pro Match did so well in such fast company.

rinkrat99

TexRacer,

I checked the Integy manual for the 16x3-Prov 2.5, well if you can call it a manual, and it states on the VESC Repeak mode which I use almost exclusivly, that the charger looks for a 70mV drop within a 15min charge or 50mV, 30 mV and 10mV as the charge time increases. so it does not have the traditional "xmV" peak detect.

I am looking at getting the Integy 16x5x6 charger, Pitbull X3, Yokomo BCS-S, LRP Pulsar Comp 1 or 2

I was looking for a dual purpose charger, motor break-in machine but probably go for the best bang for the buck of this range charger and go from there. I do want to replace the approx 16A bulb discharger I have so the Integy is looking sweet.

MR JOLLY

Helllooooooooooo fellow promatchers

Just had a good result doing carpetwars ,138 drivers entered this meeting 80 of them were stock(27t) ended up 2nd in the A-main, i thought that was good going for a old boy
Everthing performed well with all the products that i use & they gave me the power to be in the A in the first place
Keep up the good work boys

Chill Will

Congrats Jolly. EA motors and Promatch battteries are a good combo.

rctoyguy

iTrader: (21)

Pro-match thread on the 3rd page???? What's up with that? Why is everyone so quiet?

Chill Will

I guess cause no one asked any questions. I try to keep it on the first page. If you think this is bad, go the the Alabama racing forums if you haven't already.

chasintrane

I am also looking at getting the Integy 16x5x6 charger.

TexRacer,

Do you know if the 16x5x6 charger has more adjustability for the threshold than the other Integy models you listed a few posts up. Right now I am between the LRP Comp 2 and the Integy 16x5x6. Your advice is much appreciated.

MR JOLLY

I have a eagle v6 (uk) same as the integey
I think it`s a great charger

Chill Will

Almost the weekend...... Yeaaaaaaaaaaaa!!

jaysimpson

iTrader: (9)

Yeah! Guess who's birthday it is this weekend?????

Chill Will

It's not mine so who cares. lmaooooooooooooooo

Just joking. Happy B'day Jay the giant...

jaysimpson

iTrader: (9)

HAHAHA funny guy..... thanks! Man it feels great turning 21!! LOL