BMI Racing Discussions
Tech Champion
iTrader: (32)
Originally Posted by Marcos.J
wow ! the 007 needs better parts to make it work??? j/k
i am actually working on cyclone and 007 asphalt parts now.i havent cut them yet but the drawings are about finished.the cyclone drawings are complete and i just need to cut them.the thing is gonna be pimp.the 007 is almost ready.maybe a week or 2
Tech Elite
iTrader: (59)
Jason, even though we just a foot a snow today here in NY, Can we pre order the cyclone chassis?
sweet let us know when everything is done looking to go to the gate with the cyclone at the end of next month for the stock invite race ..
looking for some setups or thoughts for a setup? i am putting together a bmi 1/12 scale not the new one. the chassis came with assoc. front with 10* blocks, side tubes that look and measure the same as 3.2 crc. i have a jr3550 servo laying flat, gtx, spek micro. the class is stock club racing on a tight and some of the racers say rough carpet. staight is about 40' and infeild changes but 90's and 180's allover. only traction additive is jack the gripper. some question are center shock oil, t bar, center spring, ride height, crc side lube, camber, where to put the little washers on front (2 in front of blocks, 1 front 1 back, 2 back)
Racin'4fun
ps - any other thought?
Racin'4fun
ps - any other thought?
Jason, ygpm.
hey jason did you get willie wonka to give up the umpa loompas yet do you know if you will have cyclone chassies done by the end of the month the gate has the invite stock race and i am thinking of going
my C/F and umpa lumpa order came in today. i should have them ready by the end of the week dude
thnaks buddy i cant wait .
Tech Regular
Mr. Breiner-What are the chances of me getting a chassis for my FK05? Mine's starting to show a little wear after two years. Thanks in advance.
Jason
Jason
Jason, ygpm.
Super Moderator
iTrader: (239)
cant wait to run it sunday!! J ill need your help
Tech Lord
iTrader: (103)
remember the last time you ran a lrp
Super Moderator
iTrader: (239)
Originally Posted by 20 SMOKE
remember the last time you ran a lrp
12th setup jig.
Hey Jason...
On one of these threads you had mentioned you were either working on, or thinknig about making a setup system for 12th scale cars. How serious was that statement, time frame etc? I'm very interested.
Thanks,
Aaron
On one of these threads you had mentioned you were either working on, or thinknig about making a setup system for 12th scale cars. How serious was that statement, time frame etc? I'm very interested.
Thanks,
Aaron