True R/C Racing

My bad, didn't mean Double Post what Brian M.

Mossie

Is there an online store that stocks BMIs products?

Cheers,

Mossie

stonedgti

iTrader: (15)

You can purchase from BMI directly. http://www.bmiracing.com/

Or you can go to www.allspeedhobbies.com . They are the nearest dealer in my area.

JFCJ

iTrader: (31)

Jason,

Were you able to send me the carpet shock towers for the XRay?

No rush... carpet season here is over.. no way am I running my BMI Xray on the asphalt either... it's just tooo purty.


James

protc3

iTrader: (13)

hey dude,i am hoping to have the shock towers done by the beginning of the week.

mossie,if you need any info on my chassis kits feel free to ask.i have info on the website about my products and any questions not answered on there can be answered here.also,i sell directly to the public as well as stock hobby stores around the country.

wyd

iTrader: (51)

protc3 how did that GT run for you? What motor did you go with for it?

Brian

RBLove

iTrader: (90)

Jason,

How's it going bro? Been busy? Now that's dumb question Just thought I would say Hi. I will drop you a line via e-mail. Got some things cooking

blr

I am interested in your chassis for the x-ray, but I am wondering if I could order a chassis with the battery slots cut where I want them cut.

Thanks for the info
Brad

stonedgti

iTrader: (15)

Jason:

I received the top deck today. It was very nice of you to send it 2nd day air. Appreciate it.

rayhuang

iTrader: (5)

Jason and everyone else-I ran the Xray I put picks up of. It was so fast on top end and great rip too. Dont know how much of that is chassis, but I know the motor and battery used were good-not great.

I had a little too much off power steering and not near enough on-power-so i need to work on set-up. Butt-I really came away feeling good about the car as it was stable, tons of steering in low speed corners. Just need a few changes in caster and camber link and I thhink it will be there. I turned my fastest lap with it by 0.2 over the BMI pro4 which I ran all night. This I put in a RX-set the steering trims and ran!!!

Brian McGreevy

iTrader: (10)

Ray you got a PM

MADLUX

well after waiting 2 and a half weeks mine finally came !!! Here are some pic's of her.







-Well if you guys pay attention to every detail (yes some of you do ) you'll notice a diffrent spring in the left rear, and 2 exposed wires.

-I ran the car last on our oval, so things are a little diffrent, but i still run on the road course more though.

-And my on off switch is broken right now, which explains the wires.

-Hope ya guys enjoyed the pictures

protc3

iTrader: (13)

car looks sweet buddy.good luck with it


blr,i can do custom work but i am really backed up right now so it will be a few weeks before i can take on any more custom stuff.

True R/C Racing

YGPM Jason

MADLUX

Well ran my car tonight (thursday), beside the night being busy since i'm also the race director, I was very susprised at the results. The car handled pretty good all night long, and after each run I would pick up 1 lap. My first heat I ran 24 laps, 2nd 25 and 26 in the B-main were I finished 2nd. With the old tc3 tub chassis I could only make 12 second laps, now I'm breaking into the 11 second laps, i even ran a lap of 10.8 for one lap! Not also to mention with the BMI I could fell things in my setup that i could never tell with the old one. Just amazing how well this thing drove tonight and finished. It was worth waiting 2 weeks for this thing, you guys got a customer for life here.