Castle Creations Mamba/MM/MMM FACTORY Q&A thread!
#661

Thomas P,
1: Yes do not use the ESC until the cap is replaced.
2: No this cannot be done by yourself. The unit will need to be sent in.
Later,
1: Yes do not use the ESC until the cap is replaced.
2: No this cannot be done by yourself. The unit will need to be sent in.
Later,

#662

ok, thanks for this INfo, il give it to my friend.

#663

well ran a steady 3rd after chasing the car and tires all day. the lower the bite and dustier it gets, the worse i get. think its somewhat a setup prob, but also havin all this gross hp at finger tips. a 5700 being smacked by nice 4200s on low timing, 30% punch control, 120% EPA (vs 125max) and -45 rate isnt enuff (LOL).
still when pts are released/updated it might be enough to slide up into the #1 spot.
more to come
R
still when pts are released/updated it might be enough to slide up into the #1 spot.
more to come
R
#664

To: [email protected]
Hello there!
A month ago, my MambaMax with CMS6900 suddenly not powering the motor 5 minutes before the race
I checked everything from motor to esc to rx/tx but no luck. I mount the motor to my friend's MambaMax ESC and confirmed that the motor is working perfectly. The MambaMax ESC is heating rapidly and also the wires connecting the battery. I also double-checked my battery on other system and again confirmed it's all working well.
I went home so sad. I re-flashed my MambaMax ESC and it's all working well.
Yesterday, same thing happened..... All sorts of testing/isolating leads again to MambaMax ESC.
Last night I re-flashed my MambaMax ESC and no matter what I do, "IT'S NOT WORKING ANYMORE".
This is my first Brushless System. I have chosen this system in my belief it is better than the competition.
PLEASE HELP.
--------------------------------------------------
System:
--------------------------------------------------
Mamba Max with CMS6900 combo (bought March 2007 from www.b-p-p.com)
Peakracing carbon edition 3200mAh Lipo
spektrum DX2
Dark Impact
Hello there!
A month ago, my MambaMax with CMS6900 suddenly not powering the motor 5 minutes before the race

I went home so sad. I re-flashed my MambaMax ESC and it's all working well.
Yesterday, same thing happened..... All sorts of testing/isolating leads again to MambaMax ESC.
Last night I re-flashed my MambaMax ESC and no matter what I do, "IT'S NOT WORKING ANYMORE".
This is my first Brushless System. I have chosen this system in my belief it is better than the competition.
PLEASE HELP.
--------------------------------------------------
System:
--------------------------------------------------
Mamba Max with CMS6900 combo (bought March 2007 from www.b-p-p.com)
Peakracing carbon edition 3200mAh Lipo
spektrum DX2
Dark Impact
Last edited by fraxzi; 07-08-2007 at 11:51 PM.
#665
Tech Legend

iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)

Joe I have some new decals being made with the newest Castle Creation logo. I should have some samples tommorrow.

#666
Tech Legend

iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)

Crash you get to race lately?
#667
#668
Tech Legend

iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
#669

cant wait for the 4600 to come in. as the track continues to lose grip and get slippier, the worse off i am. i have the 5700 toned down as much as possible w/o fiddlin w/endpts and its still too much if u miss the tire combo by just a touch.
might get to point where 17Ts or bl equiv are the ticket. if castle made a motor 1 rating under the 4600 i'd take it w/o question. it'd also help me on my tire bill which is outta control
R
might get to point where 17Ts or bl equiv are the ticket. if castle made a motor 1 rating under the 4600 i'd take it w/o question. it'd also help me on my tire bill which is outta control
R
#670
Tech Master
iTrader: (1)

I took a risk. I bought the Novak 13.5SS and wired it up to my Mamba Max. I raced it. And I won!
It sucks, and sucks hard, from a dead stop. Using lots of throttle, the car just sits there rocking back and forth, making painful noises. The key seems to be using just a touch of throttle to launch it, though that still takes a full second.
Anyhoo, it works, so the risk paid off; the 13.5SS is bloody fast.
It sucks, and sucks hard, from a dead stop. Using lots of throttle, the car just sits there rocking back and forth, making painful noises. The key seems to be using just a touch of throttle to launch it, though that still takes a full second.
Anyhoo, it works, so the risk paid off; the 13.5SS is bloody fast.
#671
Tech Legend

iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)

I took a risk. I bought the Novak 13.5SS and wired it up to my Mamba Max. I raced it. And I won!
It sucks, and sucks hard, from a dead stop. Using lots of throttle, the car just sits there rocking back and forth, making painful noises. The key seems to be using just a touch of throttle to launch it, though that still takes a full second.
Anyhoo, it works, so the risk paid off; the 13.5SS is bloody fast.
It sucks, and sucks hard, from a dead stop. Using lots of throttle, the car just sits there rocking back and forth, making painful noises. The key seems to be using just a touch of throttle to launch it, though that still takes a full second.
Anyhoo, it works, so the risk paid off; the 13.5SS is bloody fast.
What type of car did you run it in? Did it only hesitate on startup?
#674
Tech Legend

iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
#675
Tech Addict
iTrader: (1)

I took a risk. I bought the Novak 13.5SS and wired it up to my Mamba Max. I raced it. And I won!
It sucks, and sucks hard, from a dead stop. Using lots of throttle, the car just sits there rocking back and forth, making painful noises. The key seems to be using just a touch of throttle to launch it, though that still takes a full second.
Anyhoo, it works, so the risk paid off; the 13.5SS is bloody fast.
It sucks, and sucks hard, from a dead stop. Using lots of throttle, the car just sits there rocking back and forth, making painful noises. The key seems to be using just a touch of throttle to launch it, though that still takes a full second.
Anyhoo, it works, so the risk paid off; the 13.5SS is bloody fast.
Now when connected to a Novak esc the motor was bogging at start. I beleive the arm is now weak

So Just use it with the sintered arm...