3LikesCastle Creations Mamba/MM/MMM FACTORY Q&A thread!
01-23-2010, 09:25 AM
#2191
Patrick
01-29-2010, 02:02 PM
#2192
Just got an email saying Castle has sent me a package. I'm pretty excited to be getting my ESC back. :nod
01-29-2010, 08:03 PM
#2193
I have the same problem always, u need to get castle links to connect ESC to PC and reset all the setting through software to default. After that connect back to the ESC and try bind the throttle setting again. It should be ok.
Hey guys, Im currently trying to sort an issue out with a motiv esc which I believe is a sidewinder knockoff?
Problem is when its turned on the esc does the twiddle beep then beep beep (for 2 cell operation I gather) then it just flashes all lights and does not respond, steering works fine, even changed esc rx wire to the steering (to find if its an rx/tx issue, steering worked on throttle ok) but still nothing, tried holding throttle and switching on ect to go through setup but still flashes and no go, tried moving throttle trim on its cheap RTR tx and switching on but no different.
Im not familular with the castle type systems so not sure what to do next, would the usb link firmware upgrade help?
Any help is appreciated, cheers.
Problem is when its turned on the esc does the twiddle beep then beep beep (for 2 cell operation I gather) then it just flashes all lights and does not respond, steering works fine, even changed esc rx wire to the steering (to find if its an rx/tx issue, steering worked on throttle ok) but still nothing, tried holding throttle and switching on ect to go through setup but still flashes and no go, tried moving throttle trim on its cheap RTR tx and switching on but no different.
Im not familular with the castle type systems so not sure what to do next, would the usb link firmware upgrade help?
Any help is appreciated, cheers.
02-08-2010, 08:21 PM
#2194
my heatsink fell off my sidewinder how do i go about re attaching it? i really dont want to have to send it in and wait for it get back to me.
02-16-2010, 12:37 PM
#2196
02-16-2010, 12:38 PM
#2197
Patrick
02-20-2010, 03:58 PM
#2198
Tech Rookie
I plugged in my Mamba ESC to the battery, brushless motor and receiver. All connections look correct. When I plug in the battery the ESC starts and I hear the initialization beep. However, once this ends the ESC constantly beeps.
What am I missing here? Why is the ESC beeping constantly?
What am I missing here? Why is the ESC beeping constantly?
02-21-2010, 04:42 AM
#2199
Tech Apprentice
02-21-2010, 11:34 PM
#2200
Sorry if this was covered but I couldn't find it.
How can I tell the difference between a Mamba Monster V1, V2, & V3 speedo?
Thanks
Robbie
How can I tell the difference between a Mamba Monster V1, V2, & V3 speedo?
Thanks
Robbie
02-22-2010, 12:04 AM
#2201
I plugged in my Mamba ESC to the battery, brushless motor and receiver. All connections look correct. When I plug in the battery the ESC starts and I hear the initialization beep. However, once this ends the ESC constantly beeps.
What am I missing here? Why is the ESC beeping constantly?
What am I missing here? Why is the ESC beeping constantly?
02-22-2010, 04:13 AM
#2203
hi...i'm new with Mamba Max...
i recently bought used Mamba Max combo with 5600kv BL motor.
i just wonder that 5600kv is equivalent to how many turn?(as in 6.5T,5.5T etc..)
some of my friends said its equivalent to 9T, some of them said its 5.5T..
kindly clarify on this.
another thing, what is the motor limit for the Mamba Max speedo.
TQ
i recently bought used Mamba Max combo with 5600kv BL motor.
i just wonder that 5600kv is equivalent to how many turn?(as in 6.5T,5.5T etc..)
some of my friends said its equivalent to 9T, some of them said its 5.5T..
kindly clarify on this.
another thing, what is the motor limit for the Mamba Max speedo.
TQ
02-22-2010, 06:10 AM
#2205
Mamba max pro Fan
I Race 10.5 @ 13.5 TC with Xray 09 and T3 in the UK and Just like to say what a Great Speedo MMP is. I usually run Norsram touring spec Speedo, MMP was so much more powerful. Still playing around with different settings, rpm cheat settings e.c.t, At the moment it’s too powerful at the wrong time (totally my fault) . Someone is going to help me set it properly for Carpet wars and any advice you could give. Sorry for being bit long winded. Just wanted to know if ok to run with out a fan in 13.5 10.5 TC racing 2c Lipo. It’s just getting warm and just trying to get weight down nearer to 1350g Touring car limit
Just ordered another one I was so impressed.
Cheers
Ben
Just ordered another one I was so impressed.
Cheers
Ben
