3LikesCastle Creations Mamba/MM/MMM FACTORY Q&A thread!
05-13-2009, 04:02 PM
#2011
dear joe ford.... or anybody else here that could help me up..
I just got a new mamba monster esc for my new Fusion EX1 buggy....
i'm new in the buggy world and just wanna know what is the best gearing for my buggy.... it run on 4 cell lipo (2 2cell lipo on y connection..) and i use a 2045kv motor... don't know what type, pink colour and little bit longer than my mamba max motor...
I just got a new mamba monster esc for my new Fusion EX1 buggy....
i'm new in the buggy world and just wanna know what is the best gearing for my buggy.... it run on 4 cell lipo (2 2cell lipo on y connection..) and i use a 2045kv motor... don't know what type, pink colour and little bit longer than my mamba max motor...
05-13-2009, 04:03 PM
#2012
05-13-2009, 08:05 PM
#2014
05-14-2009, 02:08 PM
#2015
Help Please....
I have a Mamba Max and when I tried to use it, all the leds come on but it doesn't do anything besides gets warm. The leds don't blink, just are on solid. I updated the diver today and I also tried Lipo / NiMH batteries. When it is hooked up to the computer, the red and green leds will blink. Any suggestions? Thanks
05-14-2009, 02:59 PM
#2016
05-15-2009, 01:29 AM
#2017
On the Mamba Monster Max, what does the low voltage cutoff feel like? Does it completely kill the power or will it just limit the throttle. I've also experienced a short stutter on the throttle. Is this caused by the packs reaching the LVC for a split second?
05-17-2009, 12:00 AM
#2018
mamba monster really beat those nitro guy... superb smooth and powerfull...
my motor didn't even sweat... the fan on esc also didn't have a chance to spin because the monster always stay cool... damn
just thinking of ordering a neu motor but i'm afraid that it will not fit on my buggy... any idea of mod or conversion kit...
05-29-2009, 08:59 AM
#2019
Broken Mamba Combo
I am wondering if anyone else has seen this problem?
I have the Mamba Combo in a E Revo, about 2 months old and been running great with no indications of any problems. Saturday I ran a pair of battery packs with no issues, about 30 mins later, my wife put in a fresh set of packs and tried to run the truck. She asked me to look at it because it ould not run. I turned the power switch off and back on and the ESC beeped once then went off. I flipped the switch a couple more times then pressed on the side of the switch to check the double stick tape as I have a habit of and it started running. It ran for a couple seconds then stopped. I pushed on the switcxh and got opne more beep and then nothing. The ESC and the motor wer cool to the touch, no smoke and no smell. I am assuming it is a bad switch.
If I cut out the switch and put in a new one, any issue with the warrenty? I do not relish the idea of sending this thing to Castle to be charged $100 to replace a $5 switch.
I have the Mamba Combo in a E Revo, about 2 months old and been running great with no indications of any problems. Saturday I ran a pair of battery packs with no issues, about 30 mins later, my wife put in a fresh set of packs and tried to run the truck. She asked me to look at it because it ould not run. I turned the power switch off and back on and the ESC beeped once then went off. I flipped the switch a couple more times then pressed on the side of the switch to check the double stick tape as I have a habit of and it started running. It ran for a couple seconds then stopped. I pushed on the switcxh and got opne more beep and then nothing. The ESC and the motor wer cool to the touch, no smoke and no smell. I am assuming it is a bad switch.
If I cut out the switch and put in a new one, any issue with the warrenty? I do not relish the idea of sending this thing to Castle to be charged $100 to replace a $5 switch.
05-29-2009, 11:12 PM
#2020
I am wondering if anyone else has seen this problem?
I have the Mamba Combo in a E Revo, about 2 months old and been running great with no indications of any problems. Saturday I ran a pair of battery packs with no issues, about 30 mins later, my wife put in a fresh set of packs and tried to run the truck. She asked me to look at it because it ould not run. I turned the power switch off and back on and the ESC beeped once then went off. I flipped the switch a couple more times then pressed on the side of the switch to check the double stick tape as I have a habit of and it started running. It ran for a couple seconds then stopped. I pushed on the switcxh and got opne more beep and then nothing. The ESC and the motor wer cool to the touch, no smoke and no smell. I am assuming it is a bad switch.
If I cut out the switch and put in a new one, any issue with the warrenty? I do not relish the idea of sending this thing to Castle to be charged $100 to replace a $5 switch.
I have the Mamba Combo in a E Revo, about 2 months old and been running great with no indications of any problems. Saturday I ran a pair of battery packs with no issues, about 30 mins later, my wife put in a fresh set of packs and tried to run the truck. She asked me to look at it because it ould not run. I turned the power switch off and back on and the ESC beeped once then went off. I flipped the switch a couple more times then pressed on the side of the switch to check the double stick tape as I have a habit of and it started running. It ran for a couple seconds then stopped. I pushed on the switcxh and got opne more beep and then nothing. The ESC and the motor wer cool to the touch, no smoke and no smell. I am assuming it is a bad switch.
If I cut out the switch and put in a new one, any issue with the warrenty? I do not relish the idea of sending this thing to Castle to be charged $100 to replace a $5 switch.
06-01-2009, 07:32 AM
#2021
Hi Joe,
Do you know if the new sensorless Tamiya brushless ESC and motor is an OEM product of the Mamba Max.
http://www.tamiya.com/english/produc...less/index.htm
I just ask because they look somewhat similar
Do you know if the new sensorless Tamiya brushless ESC and motor is an OEM product of the Mamba Max.
http://www.tamiya.com/english/produc...less/index.htm
I just ask because they look somewhat similar
06-01-2009, 01:32 PM
#2022
Hi Joe,
Do you know if the new sensorless Tamiya brushless ESC and motor is an OEM product of the Mamba Max.
http://www.tamiya.com/english/produc...less/index.htm
I just ask because they look somewhat similar
Do you know if the new sensorless Tamiya brushless ESC and motor is an OEM product of the Mamba Max.
http://www.tamiya.com/english/produc...less/index.htm
I just ask because they look somewhat similar
So unless it's a very cheap version...
06-03-2009, 02:43 AM
#2023
Hi Joe,
Do you know if the new sensorless Tamiya brushless ESC and motor is an OEM product of the Mamba Max.
http://www.tamiya.com/english/produc...less/index.htm
I just ask because they look somewhat similar
Do you know if the new sensorless Tamiya brushless ESC and motor is an OEM product of the Mamba Max.
http://www.tamiya.com/english/produc...less/index.htm
I just ask because they look somewhat similar
06-03-2009, 07:13 AM
#2024
Thanks
06-03-2009, 10:33 AM
#2025
Anyword on the new mamba pro sensored system going to be available? How's the beta testing going on these?
