Diggity Designs Custom R/C Components
#886
Tech Elite
iTrader: (10)
Join Date: Dec 2003
Location: ~ Stuck in ~ Maryland ~ For Now
Posts: 2,438
Trader Rating: 10 (100%+)
HOT DIGGITY !
Hay John ,
only thing new is I'm going to try Diggs New 3D08 ,Have you tryed yet ? And do you race a Cyrul track , That looks really nice how he has it set up there ! Might see you there this year if'n he has the National's this year !
only thing new is I'm going to try Diggs New 3D08 ,Have you tryed yet ? And do you race a Cyrul track , That looks really nice how he has it set up there ! Might see you there this year if'n he has the National's this year !
#887
Damon,
Just giving you a heads up on the new schedule.
Schedule Change for Saturday on-road race program:
Doors open at 9:00am
Sign up closed at 10:45am
11:00 - 12:00am 1st round
12:00 - 1:00pm 2nd round
1:00 - 2:00 3rd round with resort
2:00 - 3:00 Mains
-Fred
Just giving you a heads up on the new schedule.
Schedule Change for Saturday on-road race program:
Doors open at 9:00am
Sign up closed at 10:45am
11:00 - 12:00am 1st round
12:00 - 1:00pm 2nd round
1:00 - 2:00 3rd round with resort
2:00 - 3:00 Mains
-Fred
#889
Tech Elite
iTrader: (10)
Join Date: Dec 2003
Location: ~ Stuck in ~ Maryland ~ For Now
Posts: 2,438
Trader Rating: 10 (100%+)
Big John ,
Just ordered my New 3Do8 , You better get one soon , after all that snowmobile riding , Your going to be a bit Rusty !
________ - - - -
Just ordered my New 3Do8 , You better get one soon , after all that snowmobile riding , Your going to be a bit Rusty !
________ - - - -
Last edited by KAHUNA; 03-04-2008 at 07:17 PM. Reason: riding
#890
#891
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Well I had to do it. I just ordered my new GV2 graphite motor mount, and new 4mm shock towers for front and rear. Thats one more bullet proof part on the car.
Brian
Brian
#893
Hey-Mon,
Thanks for the parts. Just to let you know, I modded the brace down the center by just smoothing out the bumps a little and 3 sided the LiPo brace and voila, LiPo holder while retaining the brace.... Works killer.....
Now that I just spoiled it for you, wheres the pin brace???
Thanks for the parts. Just to let you know, I modded the brace down the center by just smoothing out the bumps a little and 3 sided the LiPo brace and voila, LiPo holder while retaining the brace.... Works killer.....
Now that I just spoiled it for you, wheres the pin brace???
#894
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
My new 4mm shock towers and motor mount arrived for my GV2 today. Look great. Thanks for getting it out in a timely manor. Can't wait to put the new stuff on my car.
#895
I got one of them first diggity 12th scales, anyone have any good advice on setup? Heres what I got, I was told it was a 3d-12.
Last edited by roadrashracing2; 12-24-2008 at 11:15 AM.
#896
I just found it its a d12 I belive
#897
Tech Elite
iTrader: (10)
Join Date: Dec 2003
Location: ~ Stuck in ~ Maryland ~ For Now
Posts: 2,438
Trader Rating: 10 (100%+)
Uot Diggity !
Here you go this may get you in the right direction ,
.018 front springs w/15k grease
5 degree blocks w/ castor shims split 1/1
2 degrees of camber
1/2 degree toe out
Jaco Prism Double Pink fronts at 1.66 w/ 1/8" Paragon
3.5mm ride height
rear -
.062 Medium T-bar
30wt center shock oil with Green Spring
15k in the tubes
Jaco Prism Yellow rears at 1.72 w/full Paragon
4mm ride height
Protoform Speed 12 body
And for bumpy tracks , you can use .018 front springs
30k grease , 10 degree blocks w/ castor shims both in the rear
1 degree front castor,
It was better over the bumps and definatly had more steering for those tight corners .......
good luck !
tom
.018 front springs w/15k grease
5 degree blocks w/ castor shims split 1/1
2 degrees of camber
1/2 degree toe out
Jaco Prism Double Pink fronts at 1.66 w/ 1/8" Paragon
3.5mm ride height
rear -
.062 Medium T-bar
30wt center shock oil with Green Spring
15k in the tubes
Jaco Prism Yellow rears at 1.72 w/full Paragon
4mm ride height
Protoform Speed 12 body
And for bumpy tracks , you can use .018 front springs
30k grease , 10 degree blocks w/ castor shims both in the rear
1 degree front castor,
It was better over the bumps and definatly had more steering for those tight corners .......
good luck !
tom
Last edited by KAHUNA; 03-16-2008 at 06:36 AM. Reason: Green
#899
Hey damon,
Do you guys have any old d12 parts yet? I am also looking for a basic set up, and do you have any of the v2 convertions yet?
roadrash
Do you guys have any old d12 parts yet? I am also looking for a basic set up, and do you have any of the v2 convertions yet?
roadrash
#900