Want to sell.
 

Letting go my hopped-up XV-01 with tamiya Subaru WRC 2008 bodyshell & very used onroad tyres and also drift tyre as well.
Car only ran on-road only, This car can be configured as AWD (default), FF by removing the belt, FR (for drifters, by removing front diff/driveshafts)

List of important hop up installed on car:

4 pcs Tamiya 53569 Clamp Type Alum Wheel Hub (6MM Thick)
1 set Tamiya 54515 XV-01 Assembly Univ Shaft - Front
1 set Tamiya 54516 XV-01 Assembly Univ Shaft - Rear
1 set Tamiya 54514 XV-01 Stabilizer Set - Front & Rear (Currently installed hard front, medium rear) Stabilizer stopper does not come with the kit but additionally installed
1 set Tamiya 54377 Separate Sus Mounts (1XM) - XV01
2 set Tamiya 54379 Aluminum Sus Mount (XJ) - XV01
1 set Tamiya 54376 Separate Sus Mounts (1XJ) - XV01
2 set Tamiya 54311 TA06 Cross Shaft For Gear Differential Unit (Both front and rear)
2 set Tamiya 54428 Steel Bevel Gears - For TA06 Gear Diff Unit (Both front and rear)
2 pcs Tamiya 54450 18T Aluminum Pulley - For TA06/XV-01 (Both front and rear)
4 pcs Tamiya 42102 55mm TRF Damper Set with yellow springs and Telfon pistons, can't recall how many holes pistons (All way round)
2 pcs Alumium Servo stay.
- Custom-cut Aluminium Spur gear adaptor from TA05
- Some chassis modification done to allow easy access for square-type
Lipo battery terminal
- 48 pitch, 73T Spur gear, 48 pitch, 26T pinion gear will be given.
- Some screws has been replaced with stainless steel hex screws.

Additional spare parts:

Light buckets and left over Body stickers (Not shown in picture)
1 piece NIB 6275076 FF-03 foam bumper
1 set NIB 54446 Carbon Reinforced K/KK Parts - XV-01(Steering Arm/Bat Hatch)
1 set NIB 54442 Carbon Reinforced C Parts - XV-01 (Front Uprights)
1 Set NIB 54443 Carbon Reinforced E Parts - XV-01 (Rear Uprights)

Pictures:

http://imagizer.imageshack.us/v2/320...674/pkq8Nc.jpghttp://imagizer.imageshack.us/v2/320...911/7NTGYn.jpghttp://imagizer.imageshack.us/v2/320...538/OX4aej.jpghttp://imagizer.imageshack.us/v2/320...537/5L0MId.jpghttp://imagizer.imageshack.us/v2/320...538/0qEZRB.jpghttp://imagizer.imageshack.us/v2/320...673/zPzNXi.jpghttp://imagizer.imageshack.us/v2/320...903/mpUzjp.jpghttp://imagizer.imageshack.us/v2/320...673/8GYyz7.jpghttp://imagizer.imageshack.us/v2/320...540/LUn1uY.jpghttp://imagizer.imageshack.us/v2/320...673/IJhBvs.jpghttp://imagizer.imageshack.us/v2/320...674/URdpYi.jpg



Letting go at S$250/-

----------------------------------------------------------------------------------------------------------------------------------------------------

HB Cyclone TC roller with bodyshell but without tyres & Electronics.

Pictures:

http://imagizer.imageshack.us/v2/320...633/n7yPbN.jpghttp://imagizer.imageshack.us/v2/320...674/2OvV38.jpghttp://imagizer.imageshack.us/v2/320...742/cwWDXA.jpghttp://imagizer.imageshack.us/v2/320...910/zcDpxd.jpg

Letting go at S$200/- .

---------------------------------------------------------------------------------------------------------------------

Might want to sell GP Inferno GT2 with Bodyshell (R35), everything is stock.
This car bought from one of the forumer here.

Included items, accessories just bought not long from Atalon RC:
VP racing 25% nitro fuel, only use couple of tank.
TLR glow plug igniter
Tornado After-Run Oil
Serpent glow plug wrench
Intellect 1600mah NIMH hump pack battery

Picture upload later.
All you need is TX, RX and 2 servos to get it to run. Car only play on wide open space carpark.

Remove from sale

---------------------------------------------------------------------------------------------------------------


Low baller will not be replied.
Contact 92260808, Self collect/view @ marsiling/woodlands.

up

up

up, price adjusted

up

Up, 1 item added, price revised

up

up

UP

Up

up for christmas eve