WTS Hop-Up/Mod HPI Savage X.
#1
WTS Hop-Up/Mod HPI Savage X.
WTS Hop-Up/Mod HPI Savage X.
Savage Suspension Conversion Set - #87245
http://www.google.com.sg/url?sa=t&rc...gNPLo2lDsAVvgw
SAVAGE SUSPENSION CONVERSION SET
Attachment 899721
# 87245
Savage/Changes suspension geometry for faster lap times
The Savage Suspension Conversion Set fits all Savage trucks and includes new Aluminium Upper Arm Braces, Aluminium Knuckles, Aluminium Knuckle Carriers, Aluminium Rear Spindle Carriers, Adjustable Upper Arm Link Set, thread lock, screws, wrench and complete installation instructions.
The conversion lowers the roll centre, improves steering response and provides more tuning options for faster lap times on the racetrack. The machined billet aluminium parts also add strength and durability. All alloy parts are purple anodized for custom look that matches other HPI factory option parts.
Suspension:
HPI A720 Big Bore Aluminum Shock Set
http://www.google.com.sg/url?sa=t&rc...Qde_XwhchvQvBA
Attachment 899722
Steering/Wheel Lock Nut:
HPI Purple Titanium Turn-Buckle Steering Tie-Rod
HPI Purple 17mm Wheel Hex Nut Conversion
Engine Mounting:
HPI Super Heavy-Duty CNC 10mm Thick Engine Mount Plate (Gun Metal)
HPI Purple Heavy-Duty CNC Engine Mount
Clutch Bell/Brake:
HPI Heavy-Duty Ventilated Racing Clutch Bell 17T
HPI Heavy-Duty Drilled Twin Stainless-Steel Brake Kit
Drive Shafts:
HPI Heavy-Duty Chrome Universal Center Front Drive Shaft
HPI Heavy-Duty Chrome Universal Center Rear Drive Shaft
HPI Heavy-Duty Chrome Universal Front Drive Shaft
HPI Heavy-Duty Chrome Universal Rear Drive Shaft
Engine:
O.S. 30VG ES (Easy-Start/Rotor-Start)
Engine Heat Sink Chip-Off, never affect anything except cosmetic look
* Comes with Rotor-Starter And Nosram 3000mAh 7.2V 6 Cell NiMH Battery Stick Pack
Attachment 899723
Tuned Pipe:
Dyanamite Platinum 086 HS (Hard Coated)
Attachment 899724
Servos:
Steering - Futaba BLS351
Throttle/Brake - Futaba 9351
Reverse - Futaba S3003
Others:
OFNA Throttle-Linkage Mod
HPI Sway-Bar Kit
Platinum RC Carbon Fible Savage Wing Mount Kit With Wing
RPM Center Skid Plate
Heavy-Duty Servo-Saver Spring (Hard Spring, for Savage Flux)
Spares (NIP):
Lower Arms - 1 Pair
Fuel Tank - 1 Piece
Spur Gear 47T - 3 Pieces
Bevel Gear - 2 Pieces
Pinion Gear - 2 Pieces
Universal Re-Built Kit - 1 Set
Clutch Bell 17T - 1 Piece
O.S. R5 Glow Plug - 2 Pieces
A720 Shock Re-Built Kit - 1 Set
A720 Shock Spring Perch, Rod-End, Pre-Load Spacer - 1 Pack
Shock Boots (4) - 1 Pack
Differential Gear Set - 1 Pack
OWB (One-Way-Bearing) - 1 Piece
HPI Purple 17mm Wheel Nut - 4 Pieces
25mm Wheel Extender (17mm Hub) x 8 Pieces
Spares/Others (Used):
HPI Heavy-Duty Steel Spur 47T - 1 Piece
Integy Purple 2-Piece Steel Spur Gear 47T - 1 Piece
Adjustable Upper Arm - 4 Pairs
Aluminum Differential Cup - 2 Pieces
Linkages Rods - 5 Pieces
Will upload the Truck's actual photos tomorrow.
Complete Truck selling at S$ 600.00 only, you only needs a radio and receiver.
No low-ballers.
PM me if keen. Thanks for viewing.
Savage Suspension Conversion Set - #87245
http://www.google.com.sg/url?sa=t&rc...gNPLo2lDsAVvgw
SAVAGE SUSPENSION CONVERSION SET
Attachment 899721
# 87245
Savage/Changes suspension geometry for faster lap times
The Savage Suspension Conversion Set fits all Savage trucks and includes new Aluminium Upper Arm Braces, Aluminium Knuckles, Aluminium Knuckle Carriers, Aluminium Rear Spindle Carriers, Adjustable Upper Arm Link Set, thread lock, screws, wrench and complete installation instructions.
The conversion lowers the roll centre, improves steering response and provides more tuning options for faster lap times on the racetrack. The machined billet aluminium parts also add strength and durability. All alloy parts are purple anodized for custom look that matches other HPI factory option parts.
Suspension:
HPI A720 Big Bore Aluminum Shock Set
http://www.google.com.sg/url?sa=t&rc...Qde_XwhchvQvBA
Attachment 899722
Steering/Wheel Lock Nut:
HPI Purple Titanium Turn-Buckle Steering Tie-Rod
HPI Purple 17mm Wheel Hex Nut Conversion
Engine Mounting:
HPI Super Heavy-Duty CNC 10mm Thick Engine Mount Plate (Gun Metal)
HPI Purple Heavy-Duty CNC Engine Mount
Clutch Bell/Brake:
HPI Heavy-Duty Ventilated Racing Clutch Bell 17T
HPI Heavy-Duty Drilled Twin Stainless-Steel Brake Kit
Drive Shafts:
HPI Heavy-Duty Chrome Universal Center Front Drive Shaft
HPI Heavy-Duty Chrome Universal Center Rear Drive Shaft
HPI Heavy-Duty Chrome Universal Front Drive Shaft
HPI Heavy-Duty Chrome Universal Rear Drive Shaft
Engine:
O.S. 30VG ES (Easy-Start/Rotor-Start)
Engine Heat Sink Chip-Off, never affect anything except cosmetic look
* Comes with Rotor-Starter And Nosram 3000mAh 7.2V 6 Cell NiMH Battery Stick Pack
Attachment 899723
Tuned Pipe:
Dyanamite Platinum 086 HS (Hard Coated)
Attachment 899724
Servos:
Steering - Futaba BLS351
Throttle/Brake - Futaba 9351
Reverse - Futaba S3003
Others:
OFNA Throttle-Linkage Mod
HPI Sway-Bar Kit
Platinum RC Carbon Fible Savage Wing Mount Kit With Wing
RPM Center Skid Plate
Heavy-Duty Servo-Saver Spring (Hard Spring, for Savage Flux)
Spares (NIP):
Lower Arms - 1 Pair
Fuel Tank - 1 Piece
Spur Gear 47T - 3 Pieces
Bevel Gear - 2 Pieces
Pinion Gear - 2 Pieces
Universal Re-Built Kit - 1 Set
Clutch Bell 17T - 1 Piece
O.S. R5 Glow Plug - 2 Pieces
A720 Shock Re-Built Kit - 1 Set
A720 Shock Spring Perch, Rod-End, Pre-Load Spacer - 1 Pack
Shock Boots (4) - 1 Pack
Differential Gear Set - 1 Pack
OWB (One-Way-Bearing) - 1 Piece
HPI Purple 17mm Wheel Nut - 4 Pieces
25mm Wheel Extender (17mm Hub) x 8 Pieces
Spares/Others (Used):
HPI Heavy-Duty Steel Spur 47T - 1 Piece
Integy Purple 2-Piece Steel Spur Gear 47T - 1 Piece
Adjustable Upper Arm - 4 Pairs
Aluminum Differential Cup - 2 Pieces
Linkages Rods - 5 Pieces
Will upload the Truck's actual photos tomorrow.
Complete Truck selling at S$ 600.00 only, you only needs a radio and receiver.
No low-ballers.
PM me if keen. Thanks for viewing.