MWTS Hyperion 615i duo 3 charger
03-02-2011, 07:07 PM
#1
MWTS Hyperion 615i duo 3 charger
I hv a mint condition duo3 charger to sell. Plastic protection sheet still on LCD.
Will post pixs later, if keen pls pm me Thxs!
Going for SOLD
Specs
DUO3 Changes vs. Previous DUO2:
12-Bit Balance Circuit Resolution for superb accuracy
Built-In USB DataPort and supplied USB cable
Hardware support for PC Control & Logging Software (Bi-Direction release before Dec 2009. Logging available now.)
20 Memory slots for batteries per port (40 total)
CYCLE mode for LiFePO4 and LiPo
Max Current per port raised from 10A to 15A
Features:
2-Line, 16-Character Yellow Backlit LCD Data Display
20 User-definable Memory Positions
0.1A – 15.0A Selectable Charge Current (180W max per port)
Up to 8A @ 6S per port (180W max), or 8A @ 12S (360W max) in Duo mode!
50W discharge function per port!
Lipo 2C, A123 4C+ Speed Charger
Lipo 1S-6S, A123 1S-6S
NiCd/NiMH 1-16cell, Lead-Acid 2-24V
TCS – Lipo Terminal Capacity Selection 50% ~ 100%
Two built-in Hyperion LBA10/300 Balancers with 10A max rating
300mA max balance rate per cell
Rich Data Displays during and after charging and discharging
PC Port for data logging and firmware updates
Temperature Sensor Port
11V-28V DC Input! Up to 28V input for higher efficiency when charging high voltage packs, and compatibility with a wider selection of AC/DC Power Supplies
Power Supply Amperage Control to allow reliable charging with lower output power supplies
Input Cable with 4mm male connectors
Integral, Thermostat-Controlled Cooling Fan
Rugged Aluminum Case with Insulating End Caps
Firmware Upgradable!
Will post pixs later, if keen pls pm me Thxs!
Going for SOLD
Specs
DUO3 Changes vs. Previous DUO2:
12-Bit Balance Circuit Resolution for superb accuracy
Built-In USB DataPort and supplied USB cable
Hardware support for PC Control & Logging Software (Bi-Direction release before Dec 2009. Logging available now.)
20 Memory slots for batteries per port (40 total)
CYCLE mode for LiFePO4 and LiPo
Max Current per port raised from 10A to 15A
Features:
2-Line, 16-Character Yellow Backlit LCD Data Display
20 User-definable Memory Positions
0.1A – 15.0A Selectable Charge Current (180W max per port)
Up to 8A @ 6S per port (180W max), or 8A @ 12S (360W max) in Duo mode!
50W discharge function per port!
Lipo 2C, A123 4C+ Speed Charger
Lipo 1S-6S, A123 1S-6S
NiCd/NiMH 1-16cell, Lead-Acid 2-24V
TCS – Lipo Terminal Capacity Selection 50% ~ 100%
Two built-in Hyperion LBA10/300 Balancers with 10A max rating
300mA max balance rate per cell
Rich Data Displays during and after charging and discharging
PC Port for data logging and firmware updates
Temperature Sensor Port
11V-28V DC Input! Up to 28V input for higher efficiency when charging high voltage packs, and compatibility with a wider selection of AC/DC Power Supplies
Power Supply Amperage Control to allow reliable charging with lower output power supplies
Input Cable with 4mm male connectors
Integral, Thermostat-Controlled Cooling Fan
Rugged Aluminum Case with Insulating End Caps
Firmware Upgradable!
Last edited by SuperEk4; 03-15-2011 at 08:55 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
