New and used goodies for sale (engine+pipe, KO 2.4 radio set, servos ect)
11-20-2010, 08:47 PM
#1
New and used goodies for sale (engine+pipe, KO 2.4 radio set, servos ect)
Hi all,
Some goodies for sale
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SGD 500
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG
)
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350
3. 2X KR-408S 4 channel rx. 1 SOLD
SGD 110 each
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
5. Xceed 5A lipo regulator X2 SGD 35 each
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Some goodies for sale
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SGD 500
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG
)(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350
3. 2X KR-408S 4 channel rx. 1 SOLD
SGD 110 each
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
5. Xceed 5A lipo regulator X2 SGD 35 each
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Last edited by ck960; 11-28-2010 at 07:57 PM. Reason: updating
11-21-2010, 04:21 AM
#2
3. 2X KR-408S 4 channel rx.
SGD 110 each
hi bro.... is the a/mentioned rx new or used
SGD 110 each
hi bro.... is the a/mentioned rx new or used
11-21-2010, 04:27 AM
#3
11-23-2010, 12:52 AM
#4
BUMP!! PM to deal
11-28-2010, 07:59 PM
#5
updated and price NEGO!!!
BUMP!! PM to deal
updated and price NEGO!!!
updated and price NEGO!!!
12-07-2010, 07:12 PM
#6
BUMP... all price NEGO till letgo...
Funding new project
Funding new project
12-08-2010, 06:37 AM
#7
Tech Rookie
Hi dude, what's the price for the engine only? SMS me pls 98889394
12-10-2010, 08:45 AM
#8
Tech Rookie
hi, i'm interested in the receiver. please sms or call me at 016-7735777. thanks.
12-11-2010, 04:55 PM
#9
Hi all,
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SGD 500 down to $470
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG)
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
3. 2X KR-408S 4 channel rx. all sold thanks to buyer
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $85
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Some goodies for sale
lai... lai... lai... all price lowered.... funding for new project....1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SGD 500 down to $470
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG
)(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
3. 2X KR-408S 4 channel rx. all sold thanks to buyer
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $85
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
12-23-2010, 06:30 AM
#10
BUMP add new item
Hi all,
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SGD 500 down to $470
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG)
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
3. 2X KR-408S 4 channel rx. all sold thanks to buyer
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $85
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear $85 each
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.[/QUOTE]
Some goodies for sale
lai... lai... lai... all price lowered.... funding for new project....1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SGD 500 down to $470
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG
)(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
3. 2X KR-408S 4 channel rx. all sold thanks to buyer
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $85
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear $85 each
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.[/QUOTE]
12-25-2010, 02:28 PM
#11
bump for a great seller!!! 
12-27-2010, 07:27 AM
#12
thanks bro...
]Hi all,
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG)
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $80 Take 2 for $150
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear $85 each... lower to $80... take 2 $150
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Engine and pipe sold thanks to buyer...
the rest still avilable... come come.... NEGO till let go!!!
]Hi all,
Some goodies for sale
lai... lai... lai... all price lowered.... funding for new project....1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG
)(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $80 Take 2 for $150
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear $85 each... lower to $80... take 2 $150
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Engine and pipe sold thanks to buyer...
the rest still avilable... come come.... NEGO till let go!!!
12-28-2010, 08:00 AM
#14
12-31-2010, 07:11 PM
#15
update
Hi all, HAPPY NEW YEAR 2011....
update...
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG)
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $80
1 sold... i more to go...
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear $85 each... lower to $80... take 2 $150
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Engine and pipe sold thanks to buyer...
the rest still avilable... come come.... NEGO till let go!!![/QUOTE]
update...
Some goodies for sale
lai... lai... lai... all price lowered.... funding for new project....1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia and SG
)(can put back to original position if preferred)
Projet 2200 lipo TX batt.
SGD 350 down to $300
4. KO PROPO low profile digital high speed servo PDS2511-ISC SGD 60 down to $50
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
FUTABA S9451 digital high speed servo X2 1 bookedSGD 90 each down to $80
1 sold... i more to go...
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg．cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear $85 each... lower to $80... take 2 $150
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. Xceed 5A lipo regulator X2 SGD 35 each down to $30
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
King power 5A lipo regulator for RX SGD 20 down to $15
PM to deal, item in JB, can deal at woodlands area.
COD or buyer pay shipping.
All used item are in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Engine and pipe sold thanks to buyer...
the rest still avilable... come come.... NEGO till let go!!![/QUOTE]