WTS:>>>SPEED EX15 PRO CHARGER/DISCHARGER
07-18-2010, 08:36 PM
#1
WTS:>>>SPEED EX15 PRO CHARGER/DISCHARGER
SPEED EX15 PRO
- Built-in switching up and down technology.
- 4 digits LCD display shown output Voltage, output Ampere and mAH.
- Peak detector autocut circuit with MOSFET and linear current charges NI-Cd, Ni-MH, Li-ion polymer to 100% without overcharging.
- Lightweight power switching technology unit and smart compact case design.
- Auto detect system for charges 1 to 15 cells on AC power or DC 12V battery.
- Discharging current is 2A /20A switchable, built-in two cooling fan.
- Latest fuzzy logic technology for analyzes, charge and discharge one cycle and three cycle features.
- Reverse input / output battery polarities protection.
- Over heat autocut protection design.
- DC power : 11.5~13.5V with 7A min.
- Ni-Cd / NiMH : 1 to 15 Cells
- Li-ion OR Li-Polymer: 2 Cells(8.4v) or 3 cells (12.6v) only(defined each cell voltage = 4.2v)
- Output voltage : DC 30V
- Output current : 0.5A~5.5A
- Discharge current : 2A or 20A
- Fuzzy logic processor would take adjustment if charging battery over 9V DC
-Selling 75 sgd.
SMS or call 91595142 for fast deal.
- Built-in switching up and down technology.
- 4 digits LCD display shown output Voltage, output Ampere and mAH.
- Peak detector autocut circuit with MOSFET and linear current charges NI-Cd, Ni-MH, Li-ion polymer to 100% without overcharging.
- Lightweight power switching technology unit and smart compact case design.
- Auto detect system for charges 1 to 15 cells on AC power or DC 12V battery.
- Discharging current is 2A /20A switchable, built-in two cooling fan.
- Latest fuzzy logic technology for analyzes, charge and discharge one cycle and three cycle features.
- Reverse input / output battery polarities protection.
- Over heat autocut protection design.
- DC power : 11.5~13.5V with 7A min.
- Ni-Cd / NiMH : 1 to 15 Cells
- Li-ion OR Li-Polymer: 2 Cells(8.4v) or 3 cells (12.6v) only(defined each cell voltage = 4.2v)
- Output voltage : DC 30V
- Output current : 0.5A~5.5A
- Discharge current : 2A or 20A
- Fuzzy logic processor would take adjustment if charging battery over 9V DC
-Selling 75 sgd.
SMS or call 91595142 for fast deal.
Last edited by noycess; 11-05-2010 at 07:28 AM.
07-26-2010, 06:27 AM
#2
SPEED EX15 PRO
- Built-in switching up and down technology.
- 4 digits LCD display shown output Voltage, output Ampere and mAH.
- Peak detector autocut circuit with MOSFET and linear current charges NI-Cd, Ni-MH, Li-ion polymer to 100% without overcharging.
- Lightweight power switching technology unit and smart compact case design.
- Auto detect system for charges 1 to 15 cells on AC power or DC 12V battery.
- Discharging current is 2A /20A switchable, built-in two cooling fan.
- Latest fuzzy logic technology for analyzes, charge and discharge one cycle and three cycle features.
- Reverse input / output battery polarities protection.
- Over heat autocut protection design.
- DC power : 11.5~13.5V with 7A min.
- Ni-Cd / NiMH : 1 to 15 Cells
- Li-ion OR Li-Polymer: 2 Cells(8.4v) or 3 cells (12.6v) only(defined each cell voltage = 4.2v)
- Output voltage : DC 30V
- Output current : 0.5A~5.5A
- Discharge current : 2A or 20A
- Fuzzy logic processor would take adjustment if charging battery over 9V DC
-Selling 75 sgd.
SMS or call 91595142 for fast deal.
- Built-in switching up and down technology.
- 4 digits LCD display shown output Voltage, output Ampere and mAH.
- Peak detector autocut circuit with MOSFET and linear current charges NI-Cd, Ni-MH, Li-ion polymer to 100% without overcharging.
- Lightweight power switching technology unit and smart compact case design.
- Auto detect system for charges 1 to 15 cells on AC power or DC 12V battery.
- Discharging current is 2A /20A switchable, built-in two cooling fan.
- Latest fuzzy logic technology for analyzes, charge and discharge one cycle and three cycle features.
- Reverse input / output battery polarities protection.
- Over heat autocut protection design.
- DC power : 11.5~13.5V with 7A min.
- Ni-Cd / NiMH : 1 to 15 Cells
- Li-ion OR Li-Polymer: 2 Cells(8.4v) or 3 cells (12.6v) only(defined each cell voltage = 4.2v)
- Output voltage : DC 30V
- Output current : 0.5A~5.5A
- Discharge current : 2A or 20A
- Fuzzy logic processor would take adjustment if charging battery over 9V DC
-Selling 75 sgd.
SMS or call 91595142 for fast deal.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
