Pointy71

iTrader: (6)

My new Tekin RX8 and T8 2050kv came in today. In time for Sunday Segar session

Just finished soldering. Unfortunately the RX8 can also not power the Savox 1258. Just tried and lots of glitches

Got two of those 1258 and no ESC can power these power hungry servo's. Just the Orion Vortex was strong enough. All Castle ESC's glitch (Sidewinder, SCT, Mamba max and Mamba monster), the Tekin RSpro also.

Luckily I still have a BEC lying around. But I have to start soldering again. More wires. Bah...

It will solve the problem; have the same on my Mamba monster; no more glitches

reonu5142

iTrader: (1)

Hi guys, Happy CHINESE NEW YEAR!!!! WISH ALL HUAT AH!!!

long long time no see le, I still have my 1/8 HR Truggy under my bed, can I check if you guys still track regularly? I would wanna bring my truggy out soon.

Please sms me guys at 98532340 thanks.

Leon Lim

Suzukee

iTrader: (7)

So it is the supply from the ESC to the rx that caused the glitches in your case? I had thought that the problem with my 1/10 (non-Savox) was the weak bec in the rx, resulting in power being cut off intermittently. It only glitch with that particular esc from Hobbyking though, other esc worked fine with the rx and (non-Savox) servo.

Time for you to try some other servos, maybe?
Anyway, no excuses. You are ordered to run this Sunday, because I've got big bore shocks on the Hyper now and I need to test them.

Pointy71

iTrader: (6)

No worries, BEC is in and working perfectly. No more glitches.

Actually I don't buy the Savox anymore. Last two were XP 1015 again. Stronger, faster and need less power. More expensive though

Ready for tomorrow. Bags packed!

manfred_tan

hi pros out there,
what happen to the track there? i heard it close?
for??

aspiremaniac

iTrader: (2)

closed due to noise polution by nitro drivers lol
cant blame them i was a nitro driver too now switch to 1/8 EP
ive juz got myself a caster F8T im running it at diot this weekend
wonder if any1 would wanna join me.

running on Hobbywing 150amp esc
Trackstar 2560Kv motor
im testing it out
would be glad if any kakis would join me. still new to EP
will need some help
contact me 90018696
if any1 wan join =D
cheeers!!

bradley henry

I got a losi strike here I don't use any more if ya interested it's got a brushless venom lipo ready I also have 3 Nimh and charger .

bradley henry

RUNNING TWIN 2S LIPO CHANGED THE ORIGINAL 16 TOOTH PINION GEAR TO A 17 , GOES OFF, PROB GETTING AROUND THE 100 KMPH GOING UP TO A 18 OR 19 PINION . ORIGINAL 2400KV TURNIGY GET'S HOT THOUGH TRYING TO FRY IT GIVE A EXCUSE TO GET A 3000KV ...

bradley henry

I'M WANTING TO GET A COMBO FASTER THAN THE 2400KV WITH 80AMP SPEEDY .. I'M NOT WILLING TO PAY $300 DOLLARS I THINK THAT IS JUST GREEDY FROM COMPANIES WITH THERE PRETTY LOOKING MOTORS .. THE CASTLE BRAND ARE JUST TO EXPANSIVE FOR MY LIKING . THERE IS NOTHING WRONG WITH THE TURNIGY ONES PERSONAL CHOICE THOUGH . SO ANYONE CAN RECOMMEND . REMBER IM A TIGHT ARSE.

Rlau99

iTrader: (4)

You can consider HW SC8 (120A ESC) with 2700Kv (4065 motor) combo. Its in the S$200++ range.

bigbubble

I have a old model gs storm sut nitro. I am thinking of converting to electric power. Understand there is no direct conversion from gs, I may have to bring the sut to a shop, show them what I have for them to recommend the parts for the switch. Does anyone know where in Singapore has a shop like this who has the parts ready?

SuperEk4

iTrader: (32)

Your best chance is this

http://www.rc-monster.com/proddetail...rod=rcmgsstorm


To customize a mount from a shop is going cost you alot. There are many new 1/8 Ep truggies or buggies to consider. More worth than converting a old truck. Unless u hv a lot of sentiment with it.

bigbubble

Thanks for the recommendation. Huh... I will think about it.