SAiamNE

RB S7-II with UE Pullstart mod. ~1 gallon on it, still has tons of compression.
Top of head has some scracthes on it from wheelies, nothing major.
$250 CND for just the S7-II with pullstart.. +Shipping
$125 CND for the NIP RB 063 Pipe.. +Shipping
$75 for used RP 063 Pipe with 1 small dent +Shipping
--------------------------------------
Complete Supermaxx!
Everything is polished and just rebuilt. In mint shape
Everything has been taken apart cleaned, shimmed, etc..
Not a single stripped screw or anything wrong with it.
---- The List
- UE Ext Thunder Chassis with OFNA Tank & Titanium center drive shafts, center skid (Alum & Titanium).. The works..
- UE EXT Susp with 15mm style knuckles & Knuckle head towers
- UE Titanium Hinge pins
- UE Steel & Titanium Pillow Balls
- UE CVDS 6mm Style
- SuperMaxx UltraLite 7.5 Diffs (6 spider, 5k Front/3k Rear)
- Gen 4 Servo Saver
- SuperShocks (8) with 2 packs of Race Springs (16 total, 4 of each color)
- Tranny ( Super 6, Alum input gears, custom 2 speed mod, dual disc brake, Strobe slipper with delrin spur gear, new bearings, brass inserts..)
- GA bulkheads Front/Rear with braces
- Strobe rear brace
- GA 3mm Ti Skids with lip
- GA 2mm Ti Skids (Cut, drilled/lightened for racing)
- Servo Skid
- Metric Blue Screws (GA) & Tony Screws screw kit
- Unknown aluminum bumpers with stock mounts
- Strobe Standalone Shock Limiters
- Custom painted body
- Professionally ported 24.7 Pro by a local. Also comes with a spare Piston/Sleeve and extra pullstart NIP.
- 4 stock old school T-maxx rims & SportTraxx tires.

I'm sure i'm missing lot's of other junk.
2 brand new big fuel filters, fuel line.. I could go on and on..

EVERYTHING has been rebuilt and polished. Diffs are smooth as butter and all shocks have been rebuilt with new O-rings/seals.
You will not find a single stripped screw, worn bearing, bent anything. I have been putting this together the last 3 months with utter care and attention to the most minor detail.
This truck is Ready To Race! Needs nothing except radio and reciever.

Truck is built right now with the exception of 2 missing pillow ball retainers.
It's race ready with a 4 shock set up. I've got 60 weight all around with red upfront and blue in the rear. Also have 4 other brand new super shocks with 50 and 70 weight in them for quick changes in the pits.


Spare Parts include (Most NIP)
- The Mother load shock parts
- Titanium Hinge Pins
- Titanium Front & Rear Turnbuckles
- OFNA 51 Spur gear (Plastic)
- Misc… Derlin rod for body posts (2 feet), Strobe slippers, shock/turnbuckle ends, pretty much I have extras of anything if it was broken.

Asking price is $1400 USD + Shipping.
Pictures---
http://www.unlimitedengineering.com/.../pict00033.JPG
http://www.unlimitedengineering.com/...6_original.jpg

-------------------------------------------------
Kyosho MP 7.5
Fioroni Parts:
Hardened and lightened main chassis
Lightened front shock tower
Lightened rear shock tower
Lightened steering upper plate
Lightened servo saver steering plate
Adjustable rear toe-in kit
2 piece center diff mount with brake plate
Lightened radio tray
Ferodo brake disc's (4 of them)
Front and Rear chassis braces
Boca green seal bearings.
Trinity clutch bells 14t,15t,16t
Kyosho clutch bells 13t,14t
lots of extra screws, nuts, bolts, diff gears and diff cases.
Enough spare parts to build a second car! Need front and rear diff box/bulkhead and a front bumper. So many extra parts i cannot even begin where to list.

Asking $400CND+Shipping, not a penny less.. Comes with a set of tires/rims, and 2 bodys.
You will need motor/pipe, and all electronics.. Will include a ported TT .21 with extra Piston/sleeve for additional $50CND.
This is an awesome buggy. I just ripped it apart and rebuilt everything. It's in good shape.
Not a single stripped screw or anything like that. Very well taken care of.

Sorry no pictures..
-------------------------------
PLEASE E-MAIL ME, as i do not check this forum often.
[email protected]

All prices do not include shipping.
Located Calgary, AB Canada