HB Cyclone FS
12-29-2007, 07:43 PM
#1
HB Cyclone FS
Excellent condition HB Cyclone SOLD!!!!!!
NIB Spares:
- 44mm Steel Drive Shafts
- Shock collers - aluminum
- Diff screw
- 4 Deg C-hubs
- 6 Deg C-hubs
- Suspension Arms sets (2 x front, 2 x rear arms)
- 94T Spur gear
- center direct drive shaft
- Carbon knuckle and rear hub set
Out of Bag spares:
- Set of 4 HB shocks with pistons. (Pro4 shocks on the car now)
- Spare ball-diff with extra diff balls - silky smooth
- 4 Diff bearings
- 3 Carbon steering knuckles
- 2 aluminum steering knuckles (one has broken bearing in it)
- 3 front arms
- 4 rear arms
- 5 rear hubs
- 4 complete aluminum MIP style drive shafts
- Suspension blocks (0, 1, 2, 2.5, 3)
- Servo saver with spring and shaft
- Hinge Pins
- tons of ball ends
- tons of purple spacers for suspension and roll center adjustments
- R & L 0 Deg c-hubs
- R & L 2 Deg c-hubs
- (4)R & (3)L 4 Deg c-hubs
- (2)R & (2)L 6 Deg c-hubs
- Full front and rear sway-bar set
Odds and ends such as shims and spacers.
Buyer will be set-up to run this car for quite some time before having to buy anything.
The car was ran outdoors for a short bit - minor rubs on the sides and rear of the chassis - nothing major (see pics).
SOLD!!!!!
Thanks.
NIB Spares:
- 44mm Steel Drive Shafts
- Shock collers - aluminum
- Diff screw
- 4 Deg C-hubs
- 6 Deg C-hubs
- Suspension Arms sets (2 x front, 2 x rear arms)
- 94T Spur gear
- center direct drive shaft
- Carbon knuckle and rear hub set
Out of Bag spares:
- Set of 4 HB shocks with pistons. (Pro4 shocks on the car now)
- Spare ball-diff with extra diff balls - silky smooth
- 4 Diff bearings
- 3 Carbon steering knuckles
- 2 aluminum steering knuckles (one has broken bearing in it)
- 3 front arms
- 4 rear arms
- 5 rear hubs
- 4 complete aluminum MIP style drive shafts
- Suspension blocks (0, 1, 2, 2.5, 3)
- Servo saver with spring and shaft
- Hinge Pins
- tons of ball ends
- tons of purple spacers for suspension and roll center adjustments
- R & L 0 Deg c-hubs
- R & L 2 Deg c-hubs
- (4)R & (3)L 4 Deg c-hubs
- (2)R & (2)L 6 Deg c-hubs
- Full front and rear sway-bar set
Odds and ends such as shims and spacers.
Buyer will be set-up to run this car for quite some time before having to buy anything.
The car was ran outdoors for a short bit - minor rubs on the sides and rear of the chassis - nothing major (see pics).
SOLD!!!!!
Thanks.
Last edited by duckman996; 01-02-2008 at 12:39 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
